ramips: Add hex prefix (0x) to dtsi reg properties where needed.

[openwrt/staging/lynxis/omap.git] / target / linux / ramips / dts / mt7628an.dtsi

diff --git a/target/linux/ramips/dts/mt7628an.dtsi b/target/linux/ramips/dts/mt7628an.dtsi
index 0d5b234249d6cf60e89fe90607b286940eafffb0..98496e325d984a4154d1837ea7d5b04b4d54703c 100644 (file)
--- a/target/linux/ramips/dts/mt7628an.dtsi
+++ b/target/linux/ramips/dts/mt7628an.dtsi
@@ -13,6 +13,10 @@
                bootargs = "console=ttyS0,57600";
        };
 
+       aliases {
+               serial0 = &uartlite;
+       };
+
        cpuintc: cpuintc@0 {
                #address-cells = <0>;
                #interrupt-cells = <1>;
@@ -154,7 +158,7 @@
                        status = "disabled";
                };
 
-               uartlite@c00 {
+               uartlite: uartlite@c00 {
                        compatible = "ns16550a";
                        reg = <0xc00 0x100>;
 
@@ -192,7 +196,7 @@
                        status = "disabled";
                };
 
-               uart2@e00 {
+               uart2: uart2@e00 {
                        compatible = "ns16550a";
                        reg = <0xe00 0x100>;
 
@@ -340,17 +344,18 @@
                #reset-cells = <1>;
        };
 
-       usbphy: usbphy {
-               compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy";
+       usbphy: usbphy@10120000 {
+               compatible = "ralink,mt7628an-usbphy", "mediatek,mt7620-usbphy";
+               reg = <0x10120000 0x4000>;
                #phy-cells = <1>;
 
-               resets = <&rstctrl 22>;
-               reset-names = "host";
+               resets = <&rstctrl 22 &rstctrl 25>;
+               reset-names = "host", "device";
        };
 
        sdhci@10130000 {
                compatible = "ralink,mt7620-sdhci";
-               reg = <0x10130000 4000>;
+               reg = <0x10130000 0x4000>;
 
                interrupt-parent = <&intc>;
                interrupts = <14>;
@@ -362,7 +367,7 @@
        };
 
        ehci@101c0000 {
-               compatible = "ralink,rt3xxx-ehci";
+               compatible = "generic-ehci";
                reg = <0x101c0000 0x1000>;
 
                phys = <&usbphy 1>;
@@ -373,7 +378,7 @@
        };
 
        ohci@101c1000 {
-               compatible = "ralink,rt3xxx-ohci";
+               compatible = "generic-ohci";
                reg = <0x101c1000 0x1000>;
 
                phys = <&usbphy 1>;
@@ -385,7 +390,7 @@
 
        ethernet@10100000 {
                compatible = "ralink,rt5350-eth";
-               reg = <0x10100000 10000>;
+               reg = <0x10100000 0x10000>;
 
                interrupt-parent = <&cpuintc>;
                interrupts = <5>;
@@ -398,7 +403,7 @@
 
        esw: esw@10110000 {
                compatible = "ralink,rt3050-esw";
-               reg = <0x10110000 8000>;
+               reg = <0x10110000 0x8000>;
 
                resets = <&rstctrl 23>;
                reset-names = "esw";
@@ -440,4 +445,17 @@
                        device_type = "pci";
                };
        };
+
+       wmac: wmac@10300000 {
+               compatible = "mediatek,mt7628-wmac";
+               reg = <0x10300000 0x100000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <6>;
+
+               status = "disabled";
+
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+               mediatek,5ghz = <0>;
+       };
 };