ramips: convert to new LED color/function format where possible
[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7628an_buffalo_wcr-1166ds.dts
index f8c024a85d46cbf786854f45411f2b9ebcfb0bcb..02c48791b6a00e5b943770b03d2a2e4591b4e599 100644 (file)
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
@@ -76,7 +77,8 @@
                };
 
                led_power: power {
-                       label = "green:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
                };
        };
 &pcie0 {
        mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
+               nvmem-cells = <&eeprom_factory_8000>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <5000000 6000000>;
        };
 };
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x400>;
+                                       };
+
+                                       eeprom_factory_8000: eeprom@8000 {
+                                               reg = <0x8000 0x200>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
-                               compatible = "openwrt,trx";
+                               compatible = "brcm,trx";
+                               brcm,trx-magic = <0x746f435c>;
                                label = "firmware";
                                reg = <0x50000 0x7c0000>;
                        };
 &wmac {
        status = "okay";
 
-       mediatek,mtd-eeprom = <&factory 0x0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };