ramips: mt7628: use nvmem-layout

[openwrt/staging/hauke.git] / target / linux / ramips / dts / mt7628an_rakwireless_rak633.dts

diff --git a/target/linux/ramips/dts/mt7628an_rakwireless_rak633.dts b/target/linux/ramips/dts/mt7628an_rakwireless_rak633.dts
index 66e6c94b316a0151186ac63fbb9b9102bb574a83..46dca444b57fe9ecb1835cf259ab3a4731e460ad 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_rakwireless_rak633.dts
+++ b/target/linux/ramips/dts/mt7628an_rakwireless_rak633.dts
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
 #include "mt7628an.dtsi"
 
@@ -14,16 +13,16 @@
                compatible = "gpio-leds";
 
                wifi {
-                       label = "rak633:blue:wifi";
-                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+                       label = "blue:wifi";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
 &state_default {
        wled_an {
-               ralink,group = "wled_an";
-               ralink,function = "gpio";
+               groups = "wled_an";
+               function = "gpio";
        };
 };
 
@@ -56,6 +55,20 @@
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x400>;
+                                       };
+
+                                       macaddr_factory_28: macaddr@28 {
+                                               reg = <0x28 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
@@ -88,10 +101,13 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x28>;
+       nvmem-cells = <&macaddr_factory_28>;
+       nvmem-cell-names = "mac-address";
 };
 
 &wmac {
        status = "okay";
-       ralink,mtd-eeprom = <&factory 0x4>;
+
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };