ramips: clean up useless dts partition labels

[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7628an_skylab_skw92a.dts

diff --git a/target/linux/ramips/dts/mt7628an_skylab_skw92a.dts b/target/linux/ramips/dts/mt7628an_skylab_skw92a.dts
index 0efe14621a01f7ca41d32a2829d26403ba435a3e..738041d071e80b1a9f4732d6d25fcfc5d4945977 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_skylab_skw92a.dts
+++ b/target/linux/ramips/dts/mt7628an_skylab_skw92a.dts
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
 #include "mt7628an.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
-/{
+/ {
        compatible = "skylab,skw92a", "mediatek,mt7628an-soc";
        model = "SKYLAB SKW92A";
 
@@ -15,21 +15,19 @@
                led-failsafe = &led_power;
        };
 
-       chosen {
-               bootargs = "console=ttyS0,57600";
-       };
-
        leds {
                compatible = "gpio-leds";
 
                led_power: wps {
-                       label = "skw92a:green:wps";
-                       gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+                       function = LED_FUNCTION_WPS;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "skw92a:green:wlan";
-                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+                       function = LED_FUNCTION_WLAN;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -38,7 +36,7 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -46,17 +44,21 @@
 
 &state_default {
        gpio {
-               ralink,group = "wdt", "refclk", "wled_an";
-               ralink,function = "gpio";
+               groups = "wdt", "refclk", "wled_an";
+               function = "gpio";
        };
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x28>;
+       nvmem-cells = <&macaddr_factory_28>;
+       nvmem-cell-names = "mac-address";
 };
 
 &wmac {
        status = "okay";
+
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &spi0 {
@@ -84,10 +86,24 @@
                                read-only;
                        };
 
-                       factory: partition@40000 {
+                       partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x400>;
+                                       };
+
+                                       macaddr_factory_28: macaddr@28 {
+                                               reg = <0x28 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
@@ -102,11 +118,3 @@
 &uart1 {
        status = "okay";
 };
-
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
-};