-/dts-v1/;
-
#include "mt7628an_tplink_8m.dtsi"
/ {
reset {
label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
sw1 {
label = "sw1";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
sw2 {
label = "sw2";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
wps {
label = "wps";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
compatible = "gpio-leds";
lan {
- label = "tl-wr902ac-v3:green:lan";
- gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ label = "green:lan";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
led_power: power {
- label = "tl-wr902ac-v3:green:power";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ label = "green:power";
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
usb {
- label = "tl-wr902ac-v3:green:usb";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ label = "green:usb";
+ gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
wan {
- label = "tl-wr902ac-v3:green:wan";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ label = "green:wan";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "tl-wr902ac-v3:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ label = "green:wlan";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
wps {
- label = "tl-wr902ac-v3:green:wps";
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ label = "green:wps";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
};
&state_default {
gpio {
- ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
- ralink,function = "gpio";
+ groups = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
+ function = "gpio";
};
};
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
&pcie {
status = "okay";
};
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x28000>;
ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&factory 0xf100>;
- mtd-mac-address-increment = <(-1)>;
+ nvmem-cells = <&macaddr_factory_f100>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <(-1)>;
};
};