ramips: fix dts error in LED color/function conversion

[openwrt/staging/robimarko.git] / target / linux / ramips / dts / mt7628an_vocore_vocore2-lite.dts

diff --git a/target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts b/target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts
index f8bdc27c4c6ff2fff25e0c73948a4499c1b0950c..4a5b0ff63a9ba54a752f1eec19b9cea676beecb2 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts
+++ b/target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts
@@ -1,3 +1,5 @@
+#include <dt-bindings/leds/common.h>
+
 #include "mt7628an_vocore_vocore2.dtsi"
 
 / {
@@ -15,48 +17,13 @@
                compatible = "gpio-leds";
 
                led_status: status {
-                       label = "green:status";
+                       function = LED_FUNCTION_STATUS;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
                };
        };
 };
 
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x7b0000>;
-                       };
-               };
-       };
+&firmware {
+       reg = <0x50000 0x7b0000>;
 };