-/dts-v1/;
-
#include "rt2880.dtsi"
#include <dt-bindings/gpio/gpio.h>
reg = <0x40000 0x10000>;
label = "factory";
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x200>;
+ };
+
+ macaddr_factory_4: macaddr@4 {
+ reg = <0x4 0x6>;
+ };
+ };
};
partition@50000 {
compatible = "gpio-leds";
led_power: power {
- label = "ar725w:green:power";
+ label = "green:power";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
wpsred {
- label = "ar725w:red:wps";
+ label = "red:wps";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
wpsblue {
- label = "ar725w:blue:wps";
+ label = "blue:wps";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
};
};
-&gpio0 {
- status = "okay";
-};
-
&state_default {
gpio {
groups = "i2c", "spi", "uartlite";
ðernet {
status = "okay";
- mtd-mac-address = <&factory 0x4>;
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
port@0 {
phy-handle = <&phy0>;
};
&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x0>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
};