ramips: convert most mtd-mac-address cases in DTSI to nvmem

[openwrt/staging/jow.git] / target / linux / ramips / dts / rt3050_allnet_all0256n.dtsi

diff --git a/target/linux/ramips/dts/rt3050_allnet_all0256n.dtsi b/target/linux/ramips/dts/rt3050_allnet_all0256n.dtsi
index 7458165bc44c2f7afa11f3b080e82f1d16d88cc0..13933e335c3e14fcaed7872ca674fb5c85d3b3cb 100644 (file)
--- a/target/linux/ramips/dts/rt3050_allnet_all0256n.dtsi
+++ b/target/linux/ramips/dts/rt3050_allnet_all0256n.dtsi
@@ -37,6 +37,46 @@
        };
 };
 
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       firmware: partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               /* reg property is set based on flash size in DTS files */
+                       };
+               };
+       };
+};
+
 &state_default {
        gpio {
                groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
@@ -45,7 +85,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x28>;
+       nvmem-cells = <&macaddr_factory_28>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -55,3 +96,13 @@
 &wmac {
        ralink,mtd-eeprom = <&factory 0x0>;
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_28: macaddr@28 {
+               reg = <0x28 0x6>;
+       };
+};