-/dts-v1/;
-
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
label = "factory";
reg = <0x40000 0x10000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x200>;
+ };
+
+ macaddr_factory_4: macaddr@4 {
+ reg = <0x4 0x6>;
+ };
+ };
};
partition@3e0000 {
};
partition@50000 {
- compatible = "edimax,uimage";
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,offset = <FW_EDIMAX_OFFSET>;
+ openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
label = "firmware";
reg = <0x50000 0x390000>;
};
compatible = "gpio-leds";
led_power: power {
- label = "3g-6200n:green:power";
+ label = "green:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "3g-6200n:amber:wlan";
+ label = "amber:wlan";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
3g {
- label = "3g-6200n:blue:3g";
+ label = "blue:3g";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
trigger-sources = <&otg_port1>;
linux,default-trigger = "usbport";
};
ðernet {
- mtd-mac-address = <&factory 0x4>;
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
};
&esw {
};
&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
};
&otg {