ramips: convert to new LED color/function format where possible

[openwrt/staging/jow.git] / target / linux / ramips / dts / rt3050_huawei_d105.dts

diff --git a/target/linux/ramips/dts/rt3050_huawei_d105.dts b/target/linux/ramips/dts/rt3050_huawei_d105.dts
index 2dc57392ea616c8e88cc5c6ccf90c9a32e2076de..7c3dc845bd565497d270c66305fd4e66aac61746 100644 (file)
--- a/target/linux/ramips/dts/rt3050_huawei_d105.dts
+++ b/target/linux/ramips/dts/rt3050_huawei_d105.dts
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "huawei,d105", "ralink,rt3050-soc";
@@ -41,6 +42,20 @@
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
@@ -55,12 +70,14 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "d105:red:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_RED>;
                        gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "d105:green:usb";
+                       function = LED_FUNCTION_USB;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&otg_port1>;
                        linux,default-trigger = "usbport";
@@ -87,7 +104,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -95,7 +113,8 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &otg {