ramips: rtxxxx: convert to nvmem-layout

[openwrt/staging/hauke.git] / target / linux / ramips / dts / rt3052_poray_ip2202.dts

diff --git a/target/linux/ramips/dts/rt3052_poray_ip2202.dts b/target/linux/ramips/dts/rt3052_poray_ip2202.dts
index c7126bc05f4ac6f6f23725333529db215b3db6ba..0361004d84ea2989ed2fd86ace32c6dacbf6d612 100644 (file)
--- a/target/linux/ramips/dts/rt3052_poray_ip2202.dts
+++ b/target/linux/ramips/dts/rt3052_poray_ip2202.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "rt3050.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -16,7 +14,7 @@
                led-upgrade = &led_run;
        };
 
-       cfi@1f000000 {
+       flash@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
@@ -43,6 +41,16 @@
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_factory_28: macaddr@28 {
+                                               reg = <0x28 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
@@ -57,12 +65,12 @@
                compatible = "gpio-leds";
 
                led_run: run {
-                       label = "ip2202:green:run";
+                       label = "green:run";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                net {
-                       label = "ip2202:amber:net";
+                       label = "amber:net";
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
@@ -87,7 +95,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x28>;
+       nvmem-cells = <&macaddr_factory_28>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {