-/dts-v1/;
-
#include "rt3883.dtsi"
#include <dt-bindings/gpio/gpio.h>
compatible = "gpio-leds";
led_power: power {
- label = "wlr-6000:red:power";
+ label = "red:power";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
ops {
- label = "wlr-6000:white:ops";
+ label = "white:ops";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};
};
ðernet {
status = "okay";
- mtd-mac-address = <&factory 0x8004>;
- mtd-mac-address-increment = <1>;
+ nvmem-cells = <&macaddr_factory_8004>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
port@0 {
phy-handle = <&phy0>;
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <8600000>;
label = "factory";
reg = <0x40000 0x10000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x200>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x200>;
+ };
+
+ macaddr_factory_8004: macaddr@8004 {
+ reg = <0x8004 0x6>;
+ };
+ };
};
partition@50000 {
wifi@0,0 {
compatible = "pci1814,3091";
reg = <0x10000 0 0 0 0>;
- ralink,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
};
};
&wmac {
- status = "okay";
ralink,2ghz = <0>;
- ralink,mtd-eeprom = <&factory 0x0>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
};
&ehci {