#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#define DIR_300B_GPIO_LED_STATUS_AMBER 8
#define DIR_300B_GPIO_LED_STATUS_GREEN 9
#define DIR_300B_GPIO_LED_WPS 13
+/*
+ * NOTE: The wan led is also connected to the switch, both
+ * switch and gpio must be active to make it light up
+ */
+#define DIR_300B_GPIO_LED_WAN_GREEN 12
+#define DIR_300B_GPIO_LED_WAN_AMBER 14
+
+/*
+ * NOTE: the WPS led in DIR-620 consists of two antiparallel leds,
+ * so they can't be lit simultaneously
+ */
+#define DIR_620_GPIO_LED_WPS_AMBER 11
#define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */
#define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */
-#define DIR_300B_BUTTONS_POLL_INTERVAL 20
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition dir_300b_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "devdata",
- .offset = 0x030000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "devconf",
- .offset = 0x040000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x050000,
- .size = 0x0d0000,
- }, {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x2e0000,
- }, {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x3b0000,
- }
-};
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct physmap_flash_data dir_300b_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
- .nr_parts = ARRAY_SIZE(dir_300b_partitions),
- .parts = dir_300b_partitions,
-#endif
-};
+#define DIR_300B_KEYS_POLL_INTERVAL 20
+#define DIR_300B_KEYS_DEBOUNCE_INTERVAL (3 * DIR_300B_KEYS_POLL_INTERVAL)
static struct gpio_led dir_300b_leds_gpio[] __initdata = {
{
.name = "d-link:green:status",
.gpio = DIR_300B_GPIO_LED_STATUS_GREEN,
.active_low = 1,
+ }, {
+ .name = "d-link:amber:wan",
+ .gpio = DIR_300B_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_300B_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
}, {
.name = "d-link:blue:wps",
.gpio = DIR_300B_GPIO_LED_WPS,
}
};
-static struct gpio_button dir_300b_gpio_buttons[] __initdata = {
+static struct gpio_keys_button dir_300b_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
- .threshold = 3,
+ .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL,
.gpio = DIR_300B_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
- .threshold = 3,
+ .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL,
.gpio = DIR_300B_GPIO_BUTTON_WPS,
.active_low = 1,
}
};
-static void __init dir_300b_init(void)
+static struct gpio_led dir_620_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:amber:status",
+ .gpio = DIR_300B_GPIO_LED_STATUS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:status",
+ .gpio = DIR_300B_GPIO_LED_STATUS_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:amber:wan",
+ .gpio = DIR_300B_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_300B_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR_300B_GPIO_LED_WPS,
+ }, {
+ .name = "d-link:amber:wps",
+ .gpio = DIR_620_GPIO_LED_WPS_AMBER,
+ }
+};
+
+static void __init dir_common_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
- rt305x_register_flash(0, &dir_300b_flash_data);
+ rt305x_register_flash(0);
+
+ rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
- dir_300b_leds_gpio);
- ramips_register_gpio_buttons(-1, DIR_300B_BUTTONS_POLL_INTERVAL,
+ ramips_register_gpio_buttons(-1, DIR_300B_KEYS_POLL_INTERVAL,
ARRAY_SIZE(dir_300b_gpio_buttons),
dir_300b_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
}
-MIPS_MACHINE(RAMIPS_MACH_DIR_300_REVB, "DIR-300-revB", "D-Link DIR-300 revB",
+static void __init dir_300b_init(void)
+{
+ dir_common_init();
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
+ dir_300b_leds_gpio);
+}
+
+static void __init dir_620a1_init(void)
+{
+ dir_common_init();
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_620_leds_gpio),
+ dir_620_leds_gpio);
+ rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_300_B1, "DIR-300-B1", "D-Link DIR-300 B1",
dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_600_B1, "DIR-600-B1", "D-Link DIR-600 B1",
+ dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2",
+ dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_615_D, "DIR-615-D", "D-Link DIR-615 D",
+ dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_620_A1, "DIR-620-A1", "D-Link DIR-620 A1",
+ dir_620a1_init);
projects / openwrt / staging / wigyori.git / blobdiff