ramips: Sparklan wcr-150gn board fixes

[openwrt/staging/lynxis/omap.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-wcr150gn.c

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c
index 3c3319b108ee0a2e368b039fcc1f0abb39c45eee..0da27359b1c2c53a3a2afed67712b0cbc5f9a871 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c
@@ -22,29 +22,73 @@
 
 #include "devices.h"
 
+#define WCR150GN_GPIO_LED_USER                 12
+#define WCR150GN_GPIO_LED_POWER                        8
+#define WCR150GN_GPIO_BUTTON_WPS               10
+#define WCR150GN_GPIO_BUTTON_RESET             0
+#define WCR150GN_BUTTONS_POLL_INTERVAL         20
+
+static struct gpio_led wcr150gn_leds_gpio[] __initdata = {
+       {
+               .name       = "wcr150gn:amber:user",
+               .gpio       = WCR150GN_GPIO_LED_USER,
+               .active_low = 1,
+       },
+       {
+               .name       = "wcr150gn:amber:power",
+               .gpio       = WCR150GN_GPIO_LED_POWER,
+               .active_low = 1,
+       }
+};
+
+static struct gpio_button wcr150gn_gpio_buttons[] __initdata = {
+       {
+               .desc       = "wps",
+               .type       = EV_KEY,
+               .code       = KEY_WPS_BUTTON,
+               .threshold  = 3,
+               .gpio       = WCR150GN_GPIO_BUTTON_WPS,
+               .active_low = 1,
+       },
+       {
+               .desc       = "reset",
+               .type       = EV_KEY,
+               .code       = KEY_RESTART,
+               .threshold  = 10,
+               .gpio       = WCR150GN_GPIO_BUTTON_RESET,
+               .active_low = 1,
+       }
+};
+
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition wcr150gn_partitions[] = {
        {
-               .name   = "Bootloader",
+               .name   = "bootloader",
                .offset = 0,
                .size   = 0x030000,
                .mask_flags = MTD_WRITEABLE,
        }, {
-               .name   = "Config",
+               .name   = "config",
                .offset = 0x030000,
                .size   = 0x040000,
+               .mask_flags = MTD_WRITEABLE,
        }, {
-               .name   = "Factory",
+               .name   = "factory",
                .offset = 0x040000,
                .size   = 0x050000,
+               .mask_flags = MTD_WRITEABLE,
        }, {
-               .name   = "Kernel",
+               .name   = "kernel",
                .offset = 0x050000,
-               .size   = 0x120000,
+               .size   = 0x0d0000,
        }, {
                .name   = "rootfs",
                .offset = 0x120000,
-               .size   = 0x400000,
+               .size   = 0x2e0000,
+       }, {
+               .name   = "firmware",
+               .offset = 0x050000,
+               .size   = 0x3b0000,
        }
 };
 #endif /* CONFIG_MTD_PARTITIONS */
@@ -60,8 +104,16 @@ static void __init wcr150gn_init(void)
 {
        rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
        rt305x_register_flash(0, &wcr150gn_flash_data);
+       ramips_register_gpio_leds(-1, ARRAY_SIZE(wcr150gn_leds_gpio),
+                                 wcr150gn_leds_gpio);
+       ramips_register_gpio_buttons(-1, WCR150GN_BUTTONS_POLL_INTERVAL,
+                                    ARRAY_SIZE(wcr150gn_gpio_buttons),
+                                    wcr150gn_gpio_buttons);
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
        rt305x_register_ethernet();
        rt305x_register_wifi();
+       rt305x_register_wdt();
+       rt305x_register_usb();
 }
 
 MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN",