$(call Image/Build/Profile/$(PROFILE),initramfs)
endef
-DEVICE_VARS += DTS IMAGE_SIZE KERNEL_SIZE
+DEVICE_VARS += DTS IMAGE_SIZE
loadaddr-y := 0x80000000
loadaddr-$(CONFIG_TARGET_ramips_rt288x) := 0x88000000
$(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.combined,$(call sysupname,$(1),$(2)),$(6))
endef
+define Build/umedia-header
+ fix-u-media-header -T 0x46 -B $(1) -i $@ -o $@.new && mv $@.new $@
+endef
+
+define Build/senao-header
+ $(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
+ mv $@.new $@
+endef
+
+define Build/seama
+ $(STAGING_DIR_HOST)/bin/seama -i $@ $(1)
+ mv $@.seama $@
+endef
+
+define Build/seama-seal
+ $(call Build/seama,-s $@.seama $(1))
+endef
+
#
# The real magic happens inside these templates
#
$(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
endef
-# build Seama header images
-define BuildFirmware/Seama/squashfs
- $(call MkImageLzmaDtb,$(2),$(3),$(5))
- $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.bin)
- cat $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/root.$(1) > $(KDIR)/img_$(2).$(1).tmp
- if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt $$$$(($(5) - 64)) ]; then \
- echo "Warning: $(KDIR)/img_$(2).$(1).tmp is too big" >&2; \
- else \
- dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=64k conv=sync; \
- ( \
- dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64`; \
- dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
- ) > $(KDIR)/vmlinux-$(2).tmp; \
- $(STAGING_DIR_HOST)/bin/seama \
- -i $(KDIR)/vmlinux-$(2).tmp \
- -m "dev=/dev/mtdblock/2" -m "type=firmware"; \
- $(STAGING_DIR_HOST)/bin/seama \
- -s $(call imgname,$(1),$(2))-factory.bin \
- -m "signature=$(4)" \
- -i $(KDIR)/vmlinux-$(2).tmp.seama; \
- dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64` of=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp; \
- $(STAGING_DIR_HOST)/bin/seama \
- -i $(KDIR)/vmlinux-$(2)-sysupgrade.tmp \
- -m "dev=/dev/mtdblock/2" -m "type=firmware"; \
- ( \
- dd if=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp.seama; \
- dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
- ) > $(BIN_DIR)/$(output_name); \
- fi
-endef
-BuildFirmware/Seama/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
-
define BuildFirmware/PorayDualSize/squashfs
$(call BuildFirmware/DefaultDualSize/$(1),$(1),$(2),$(3))
if [ -e "$(call sysupname,$(1),$(2)-4M)" ]; then \
include mt7688.mk
endif
-
-ifndef TARGET_DEVICES
+ifdef LEGACY_DEVICES
#
# Generic Targets - only needed for legacy image building code
#
define Image/Build
$(call Image/Build/$(1))
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
- $(call Image/Build/Profile/$(PROFILE),$(1))
endef
+
+define Image/Build/Profile
+ $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Image/Build/Profile/$(1),initramfs))
+ $(call Image/Build/Profile/$(1),$(2))
+endef
+
endif
$(eval $(call BuildImage))