build: centralize fakeroot code

[openwrt/staging/luka.git] / target / linux / ramips / image / mt7620.mk

diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 1889bcf708bf02d4b27f3df088a2cab238e3597d..446bd9981e28bec21f62416fcca05b85d8ec8f2a 100644 (file)
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -7,18 +7,6 @@ define Build/tplink-header
                -o $@.new -k $@ -r $(IMAGE_ROOTFS) && mv $@.new $@
 endef
 
-define Build/pad-kernel-ex2700
-       cp $@ $@.tmp && dd if=/dev/zero bs=64 count=1 >> $@.tmp \
-               && dd if=$@.tmp of=$@.new bs=64k conv=sync && truncate -s -64 $@.new \
-               && cat ex2700-fakeroot.uImage >> $@.new && rm $@.tmp && mv $@.new $@
-endef
-
-define Build/netgear-header
-       $(STAGING_DIR_HOST)/bin/mkdniimg \
-               $(1) -v OpenWrt -i $@ \
-               -o $@.new && mv $@.new $@
-endef
-
 define Build/elecom-header
        cp $@ $(KDIR)/v_0.0.0.bin
        ( \
@@ -64,17 +52,32 @@ endef
 TARGET_DEVICES += ArcherMR200
 
 define Device/ex2700
+  NETGEAR_HW_ID := 29764623+4+0+32+2x2+0
+  NETGEAR_BOARD_ID := EX2700
   DTS := EX2700
   BLOCKSIZE := 4k
   IMAGE_SIZE := $(ralink_default_fw_size_4M)
   IMAGES += factory.bin
-  KERNEL := $(KERNEL_DTB) | uImage lzma | pad-kernel-ex2700
+  KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakeroot-hdr
   IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-       netgear-header -B EX2700 -H 29764623+4+0+32+2x2+0
+       netgear-dni
   DEVICE_TITLE := Netgear EX2700
 endef
 TARGET_DEVICES += ex2700
 
+define Device/wn3000rpv3
+  NETGEAR_HW_ID := 29764836+8+0+32+2x2+0
+  NETGEAR_BOARD_ID := WN3000RPv3
+  DTS := WN3000RPV3
+  BLOCKSIZE := 4k
+  IMAGES += factory.bin
+  KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakeroot-hdr
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+       netgear-dni
+  DEVICE_TITLE := Netgear WN3000RPv3
+endef
+TARGET_DEVICES += wn3000rpv3
+
 define Device/wt3020-4M
   DTS := WT3020-4M
   BLOCKSIZE := 4k
@@ -437,7 +440,7 @@ define Device/kn_rc
   DEVICE_TITLE := ZyXEL Keenetic Omni
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | check-size $$$$(IMAGE_SIZE) | \
+  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
        zyimage -d 4882 -v "ZyXEL Keenetic Omni"
 endef
 TARGET_DEVICES += kn_rc
@@ -447,7 +450,7 @@ define Device/kn_rf
   DEVICE_TITLE := ZyXEL Keenetic Omni II
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | check-size $$$$(IMAGE_SIZE) | \
+  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
        zyimage -d 2102034 -v "ZyXEL Keenetic Omni II"
 endef
 TARGET_DEVICES += kn_rf
@@ -458,7 +461,7 @@ define Device/kng_rc
   DEVICE_TITLE := ZyXEL Keenetic Viva
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+  IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
        zyimage -d 8997 -v "ZyXEL Keenetic Viva"
 endef
 TARGET_DEVICES += kng_rc