DEFAULT_SOC := mt7621
KERNEL_DTB += -d21
-DEVICE_VARS += UIMAGE_MAGIC ELECOM_HWNAME LINKSYS_HWNAME
-
-# The OEM webinterface expects an kernel with initramfs which has the uImage
-# header field ih_name.
-# We don't want to set the header name field for the kernel include in the
-# sysupgrade image as well, as this image shouldn't be accepted by the OEM
-# webinterface. It will soft-brick the board.
-define Build/custom-initramfs-uimage
- mkimage -A $(LINUX_KARCH) \
- -O linux -T kernel \
- -C lzma -a $(KERNEL_LOADADDR) $(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC),) \
- -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n '$(1)' -d $@ $@.new
- mv $@.new $@
-endef
+DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME
define Build/elecom-wrc-gs-factory
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
- ( $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | tr -d '\n' ) >> $@
- ( \
- echo -n "ELECOM $(product) v$(version)" | \
- dd bs=32 count=1 conv=sync; \
- dd if=$@; \
- ) > $@.new
- mv $@.new $@
- echo -n "MT7621_ELECOM_$(product)" >> $@
-endef
-
-define Build/elecom-wrc-factory
- $(eval product=$(word 1,$(1)))
- $(eval version=$(word 2,$(1)))
- $(STAGING_DIR_HOST)/bin/mkhash md5 $@ >> $@
+ $(eval hash_opt=$(word 3,$(1)))
+ $(MKHASH) md5 $(hash_opt) $@ >> $@
( \
echo -n "ELECOM $(product) v$(version)" | \
dd bs=32 count=1 conv=sync; \
$(TAR) -cf $(1) --transform='s/^.*/compat/' $(1).compat; \
\
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
- mkhash md5 $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) > $(1).md5; \
+ $(MKHASH) md5 $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) > $(1).md5; \
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp.md5/' $(1).md5; \
\
echo "dummy" > $(1).rootfs; \
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp/' $(1).rootfs; \
\
- mkhash md5 $(1).rootfs > $(1).md5; \
+ $(MKHASH) md5 $(1).rootfs > $(1).md5; \
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp.md5/' $(1).md5; \
\
echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $(1).version; \
fi
endef
+define Build/zytrx-header
+ $(eval board=$(word 1,$(1)))
+ $(eval version=$(word 2,$(1)))
+ $(STAGING_DIR_HOST)/bin/zytrx -B '$(board)' -v '$(version)' -i $@ -o $@.new
+ mv $@.new $@
+endef
+
define Device/dsa-migration
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
DEVICE_MODEL := Quad-E4G
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 uboot-envtools \
-wpad-basic-wolfssl
+ SUPPORTED_DEVICES += quad-e4g
endef
TARGET_DEVICES += alfa-network_quad-e4g
endef
TARGET_DEVICES += asus_rt-ac85p
+define Device/asus_rt-n56u-b1
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := RT-N56U
+ DEVICE_VARIANT := B1
+ IMAGE_SIZE := 16064k
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+ kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-n56u-b1
+
define Device/buffalo_wsr-1166dhp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += buffalo_wsr-600dhp
+define Device/cudy_wr1300
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 15872k
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := WR1300
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb2 kmod-usb3 \
+ kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += cudy_wr1300
+
+define Device/cudy_wr2100
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := WR2100
+ IMAGE_SIZE := 15872k
+ UIMAGE_NAME := R11
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
+endef
+TARGET_DEVICES += cudy_wr2100
+
define Device/dlink_dir-8xx-a1
$(Device/dsa-migration)
IMAGE_SIZE := 16000k
check-size
endef
+define Device/dlink_dir-8xx-r1
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 16064k
+ DEVICE_VENDOR := D-Link
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
+ KERNEL_INITRAMFS := $$(KERNEL)
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs |\
+ pad-rootfs | append-metadata | check-size
+endef
+
define Device/dlink_dir-xx60-a1
$(Device/dsa-migration)
BLOCKSIZE := 128k
endef
TARGET_DEVICES += dlink_dir-1960-a1
+define Device/dlink_dir-2640-a1
+ $(Device/dlink_dir-xx60-a1)
+ DEVICE_MODEL := DIR-2640
+ DEVICE_VARIANT := A1
+endef
+TARGET_DEVICES += dlink_dir-2640-a1
+
define Device/dlink_dir-2660-a1
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-2660
endef
TARGET_DEVICES += dlink_dir-882-a1
+define Device/dlink_dir-882-r1
+ $(Device/dlink_dir-8xx-r1)
+ DEVICE_MODEL := DIR-882
+ DEVICE_VARIANT := R1
+ DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
+ IMAGE/factory.bin := append-kernel | append-rootfs | check-size | \
+ sign-dlink-ru 57c5375741c30ca9ebcb36713db4ba51 \
+ ab0dff19af8842cdb70a86b4b68d23f7
+endef
+TARGET_DEVICES += dlink_dir-882-r1
+
define Device/d-team_newifi-d2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
define Device/d-team_pbr-m1
$(Device/dsa-migration)
- IMAGE_SIZE := 16064k
+ IMAGE_SIZE := 32448k
DEVICE_VENDOR := PandoraBox
DEVICE_MODEL := PBR-M1
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
DEVICE_MODEL := WRC-1167GHBK2-S
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
- elecom-wrc-factory WRC-1167GHBK2-S 0.00
+ elecom-wrc-gs-factory WRC-1167GHBK2-S 0.00
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
endef
TARGET_DEVICES += elecom_wrc-1167ghbk2-s
DEVICE_VENDOR := ELECOM
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
- elecom-wrc-gs-factory $$$$(ELECOM_HWNAME) 0.00
+ elecom-wrc-gs-factory $$$$(ELECOM_HWNAME) 0.00 -N | \
+ append-string MT7621_ELECOM_$$$$(ELECOM_HWNAME)
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
endef
+define Device/elecom_wrc-1167gs2-b
+ $(Device/elecom_wrc-gs)
+ IMAGE_SIZE := 11264k
+ DEVICE_MODEL := WRC-1167GS2-B
+ ELECOM_HWNAME := WRC-1167GS2
+endef
+TARGET_DEVICES += elecom_wrc-1167gs2-b
+
+define Device/elecom_wrc-1167gst2
+ $(Device/elecom_wrc-gs)
+ IMAGE_SIZE := 24576k
+ DEVICE_MODEL := WRC-1167GST2
+ ELECOM_HWNAME := WRC-1167GST2
+endef
+TARGET_DEVICES += elecom_wrc-1167gst2
+
define Device/elecom_wrc-1750gs
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
endef
TARGET_DEVICES += elecom_wrc-1750gs
+define Device/elecom_wrc-1750gst2
+ $(Device/elecom_wrc-gs)
+ IMAGE_SIZE := 24576k
+ DEVICE_MODEL := WRC-1750GST2
+ ELECOM_HWNAME := WRC-1750GST2
+endef
+TARGET_DEVICES += elecom_wrc-1750gst2
+
define Device/elecom_wrc-1750gsv
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
endef
TARGET_DEVICES += elecom_wrc-1900gst
+define Device/elecom_wrc-2533ghbk-i
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ DEVICE_VENDOR := ELECOM
+ DEVICE_MODEL := WRC-2533GHBK-I
+ IMAGE_SIZE := 9856k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
+ elx-header 0107002d 8844A2D168B45A2D | \
+ elecom-product-header WRC-2533GHBK-I
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
+endef
+TARGET_DEVICES += elecom_wrc-2533ghbk-i
+
define Device/elecom_wrc-2533gst
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
endef
TARGET_DEVICES += gehua_ghl-r-001
+define Device/glinet_gl-mt1300
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 32448k
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-MT1300
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += glinet_gl-mt1300
+
define Device/gnubee_gb-pc1
$(Device/dsa-migration)
DEVICE_VENDOR := GnuBee
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
+# The OEM webinterface expects an kernel with initramfs which has the uImage
+# header field ih_name.
+# We don't want to set the header name field for the kernel include in the
+# sysupgrade image as well, as this image shouldn't be accepted by the OEM
+# webinterface. It will soft-brick the board.
+
define Device/iodata_wn-ax1167gr2
$(Device/iodata_nand)
- UIMAGE_MAGIC := 0x434f4d42
DEVICE_MODEL := WN-AX1167GR2
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
- custom-initramfs-uimage 3.10(XBC.1)b10 | iodata-mstc-header
+ uImage lzma -M 0x434f4d42 -n '3.10(XBC.1)b10' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
endef
TARGET_DEVICES += iodata_wn-ax1167gr2
define Device/iodata_wn-ax2033gr
$(Device/iodata_nand)
- UIMAGE_MAGIC := 0x434f4d42
DEVICE_MODEL := WN-AX2033GR
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
- custom-initramfs-uimage 3.10(VST.1)C10 | iodata-mstc-header
+ uImage lzma -M 0x434f4d42 -n '3.10(VST.1)C10' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
endef
TARGET_DEVICES += iodata_wn-ax2033gr
define Device/iodata_wn-dx1167r
$(Device/iodata_nand)
- UIMAGE_MAGIC := 0x434f4d43
DEVICE_MODEL := WN-DX1167R
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
- custom-initramfs-uimage 3.10(XIK.1)b10 | iodata-mstc-header
+ uImage lzma -M 0x434f4d43 -n '3.10(XIK.1)b10' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
endef
TARGET_DEVICES += iodata_wn-dx1167r
+define Device/iodata_wn-dx1200gr
+ $(Device/iodata_nand)
+ DEVICE_MODEL := WN-DX1200GR
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
+ uImage lzma -M 0x434f4d43 -n '3.10(XIQ.0)b20' | iodata-mstc-header
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
+endef
+TARGET_DEVICES += iodata_wn-dx1200gr
+
define Device/iodata_wn-gx300gr
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += jcg_jhr-ac876m
+define Device/jcg_q20
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 91136k
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+ check-size
+ DEVICE_VENDOR := JCG
+ DEVICE_MODEL := Q20
+ DEVICE_PACKAGES := kmod-mt7915e uboot-envtools
+endef
+TARGET_DEVICES += jcg_q20
+
+define Device/jcg_y2
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 16064k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | jcg-header 95.1
+ JCG_MAXSIZE := 16064k
+ DEVICE_VENDOR := JCG
+ DEVICE_MODEL := Y2
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += jcg_y2
+
define Device/lenovo_newifi-d1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += linksys_ea7300-v1
+define Device/linksys_ea7300-v2
+ $(Device/linksys_ea7xxx)
+ DEVICE_MODEL := EA7300
+ DEVICE_VARIANT := v2
+ LINKSYS_HWNAME := EA7300v2
+ DEVICE_PACKAGES += kmod-mt7603
+endef
+TARGET_DEVICES += linksys_ea7300-v2
+
define Device/linksys_ea7500-v2
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA7500
BLOCKSIZE := 64k
IMAGE_SIZE := 16128k
DEVICE_PACKAGES := kmod-usb3
- LOADER_TYPE := elf
- KERNEL := $(KERNEL_DTB) | loader-kernel
+ KERNEL_NAME := vmlinuz
+ KERNEL := kernel-bin | append-dtb-elf
IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | \
pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata | \
check-size
define Device/mqmaker_witi
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := MQmaker
DEVICE_MODEL := WiTi
define Device/mtc_wr1201
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := MTC
DEVICE_MODEL := Wireless Router WR1201
- KERNEL_INITRAMFS := $(KERNEL_DTB) | custom-initramfs-uimage WR1201_8_128
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma -n 'WR1201_8_128'
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport
endef
endef
TARGET_DEVICES += totolink_a7000r
+define Device/totolink_x5000r
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 16064k
+ UIMAGE_NAME := C8343R-9999
+ DEVICE_VENDOR := TOTOLINK
+ DEVICE_MODEL := X5000R
+ DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += totolink_x5000r
+
+define Device/tplink_archer-a6-v3
+ $(Device/dsa-migration)
+ $(Device/tplink-safeloader)
+ DEVICE_MODEL := Archer A6
+ DEVICE_VARIANT := V3
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e \
+ kmod-mt7663-firmware-ap kmod-mt7663-firmware-sta
+ TPLINK_BOARD_ID := ARCHER-A6-V3
+ KERNEL := $(KERNEL_DTB) | uImage lzma
+ IMAGE_SIZE := 15744k
+endef
+TARGET_DEVICES += tplink_archer-a6-v3
+
+define Device/tplink_archer-c6u-v1
+ $(Device/dsa-migration)
+ $(Device/tplink-safeloader)
+ DEVICE_MODEL := Archer C6U
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-mt7603 \
+ kmod-mt7615e kmod-mt7663-firmware-ap \
+ kmod-usb3 kmod-usb-ledtrig-usbport
+ KERNEL := $(KERNEL_DTB) | uImage lzma
+ TPLINK_BOARD_ID := ARCHER-C6U-V1
+ IMAGE_SIZE := 15744k
+endef
+TARGET_DEVICES += tplink_archer-c6u-v1
+
+define Device/tplink_eap235-wall-v1
+ $(Device/dsa-migration)
+ $(Device/tplink-safeloader)
+ DEVICE_MODEL := EAP235-Wall
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
+ TPLINK_BOARD_ID := EAP235-WALL-V1
+ IMAGE_SIZE := 13440k
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory | \
+ pad-extra 128
+endef
+TARGET_DEVICES += tplink_eap235-wall-v1
+
define Device/tplink_re350-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
endef
TARGET_DEVICES += ubnt_edgerouter-x-sfp
+define Device/ubnt_unifi-6-lite
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi 6 Lite
+ DEVICE_DTS_CONFIG := config@1
+ DEVICE_PACKAGES += kmod-mt7603 kmod-mt7915e
+ KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ IMAGE_SIZE := 15424k
+endef
+TARGET_DEVICES += ubnt_unifi-6-lite
+
define Device/ubnt_unifi-nanohd
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
endef
TARGET_DEVICES += ubnt_unifi-nanohd
+define Device/unielec_u7621-01-16m
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 16064k
+ DEVICE_VENDOR := UniElec
+ DEVICE_MODEL := U7621-01
+ DEVICE_VARIANT := 16M
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3
+endef
+TARGET_DEVICES += unielec_u7621-01-16m
+
define Device/unielec_u7621-06-16m
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-06
define Device/unielec_u7621-06-64m
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 65216k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-06
define Device/wevo_11acnas
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
UIMAGE_NAME := 11AC-NAS-Router(0.0.0)
DEVICE_VENDOR := WeVO
define Device/wevo_w2914ns-v2
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
UIMAGE_NAME := W2914NS-V2(0.0.0)
DEVICE_VENDOR := WeVO
endef
TARGET_DEVICES += winstars_ws-wn583a6
-define Device/xiaomi-ac2100
+define Device/xiaomi_nand_separate
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_PACKAGES := uboot-envtools
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
- IMAGE_SIZE := 120320k
UBINIZE_OPTS := -E 5
IMAGES += kernel1.bin rootfs0.bin
IMAGE/kernel1.bin := append-kernel
IMAGE/rootfs0.bin := append-ubi | check-size
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- DEVICE_VENDOR := Xiaomi
- DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware \
- uboot-envtools
endef
-define Device/xiaomi_mi-router-ac2100
- $(Device/xiaomi-ac2100)
- DEVICE_MODEL := Mi Router AC2100
-endef
-TARGET_DEVICES += xiaomi_mi-router-ac2100
-
-define Device/xiaomi_mir3g
- $(Device/dsa-migration)
- $(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 124416k
- UBINIZE_OPTS := -E 5
- IMAGES += kernel1.bin rootfs0.bin
- IMAGE/kernel1.bin := append-kernel
- IMAGE/rootfs0.bin := append-ubi | check-size
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- DEVICE_VENDOR := Xiaomi
+define Device/xiaomi_mi-router-3g
+ $(Device/xiaomi_nand_separate)
DEVICE_MODEL := Mi Router 3G
- SUPPORTED_DEVICES += R3G
- SUPPORTED_DEVICES += mir3g
- DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
- kmod-usb-ledtrig-usbport uboot-envtools
+ IMAGE_SIZE := 124416k
+ DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+ kmod-usb-ledtrig-usbport
+ SUPPORTED_DEVICES += R3G mir3g xiaomi,mir3g
endef
-TARGET_DEVICES += xiaomi_mir3g
+TARGET_DEVICES += xiaomi_mi-router-3g
-define Device/xiaomi_mir3g-v2
+define Device/xiaomi_mi-router-3g-v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 14848k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 3G
DEVICE_VARIANT := v2
- DEVICE_ALT0_VENDOR := Xiaomi
- DEVICE_ALT0_MODEL := Mi Router 4A
- DEVICE_ALT0_VARIANT := Gigabit Edition
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
+ SUPPORTED_DEVICES += xiaomi,mir3g-v2
endef
-TARGET_DEVICES += xiaomi_mir3g-v2
+TARGET_DEVICES += xiaomi_mi-router-3g-v2
-define Device/xiaomi_mir3p
+define Device/xiaomi_mi-router-3-pro
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
BLOCKSIZE := 128k
check-size
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport uboot-envtools
+ SUPPORTED_DEVICES += xiaomi,mir3p
+endef
+TARGET_DEVICES += xiaomi_mi-router-3-pro
+
+define Device/xiaomi_mi-router-4
+ $(Device/xiaomi_nand_separate)
+ DEVICE_MODEL := Mi Router 4
+ IMAGE_SIZE := 124416k
+ DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2
endef
-TARGET_DEVICES += xiaomi_mir3p
+TARGET_DEVICES += xiaomi_mi-router-4
+
+define Device/xiaomi_mi-router-4a-gigabit
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 14848k
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := Mi Router 4A
+ DEVICE_VARIANT := Gigabit Edition
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
+endef
+TARGET_DEVICES += xiaomi_mi-router-4a-gigabit
+
+define Device/xiaomi_mi-router-ac2100
+ $(Device/xiaomi_nand_separate)
+ DEVICE_MODEL := Mi Router AC2100
+ IMAGE_SIZE := 120320k
+ DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
+endef
+TARGET_DEVICES += xiaomi_mi-router-ac2100
define Device/xiaomi_redmi-router-ac2100
- $(Device/xiaomi-ac2100)
+ $(Device/xiaomi_nand_separate)
DEVICE_MODEL := Redmi Router AC2100
+ IMAGE_SIZE := 120320k
+ DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
endef
TARGET_DEVICES += xiaomi_redmi-router-ac2100
define Device/zbtlink_zbt-we1326
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE1326
define Device/zbtlink_zbt-we3526
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE3526
define Device/zbtlink_zbt-wg2626
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG2626
endef
TARGET_DEVICES += zio_freezio
+define Device/zyxel_nr7101
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NR7101
+ DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 uboot-envtools kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+ KERNEL := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) 9.99(ABUV.9)$$(VERSION_DIST)-recovery
+ KERNEL_INITRAMFS_SUFFIX := -recovery.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += zyxel_nr7101
+
define Device/zyxel_wap6805
$(Device/dsa-migration)
BLOCKSIZE := 128k