DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME DLINK_HWID
+define Build/append-dlink-covr-metadata
+ echo -ne '{"supported_devices": "$(1)", "firmware": "' > $@metadata.tmp
+ $(MKHASH) md5 "$@" | head -c32 >> $@metadata.tmp
+ echo '"}' >> $@metadata.tmp
+ fwtool -I $@metadata.tmp $@
+ rm $@metadata.tmp
+endef
+
define Build/arcadyan-trx
echo -ne "hsqs" > $@.hsqs
$(eval trx_magic=$(word 1,$(1)))
)
endef
+define Build/iodata-mstc-header2
+ $(eval model=$(word 1,$(1)))
+ $(eval model_id=$(word 2,$(1)))
+
+ ( \
+ fw_len_crc=$$(gzip -c $@ | tail -c 8 | \
+ od -An -tx8 --endian little); \
+ printf "\x03\x1d\x61\x29\x07$(model)" | \
+ dd bs=21 count=1 conv=sync 2>/dev/null; \
+ printf "0.00.000" | dd bs=16 count=1 conv=sync 2>/dev/null; \
+ printf "$$(echo $(REVISION) | cut -d- -f1 | head -c8)" | \
+ dd bs=9 count=1 conv=sync 2>/dev/null; \
+ printf "$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)" | \
+ dd bs=33 count=1 conv=sync 2>/dev/null; \
+ date -d "@$(SOURCE_DATE_EPOCH)" "+%F" | tr -d "\n" | \
+ dd bs=15 count=1 conv=sync 2>/dev/null; \
+ printf "$$(echo $(model_id) | sed 's/../\\x&/g')" | \
+ dd bs=8 count=1 conv=sync 2>/dev/null; \
+ printf "$$(echo $$fw_len_crc | sed 's/../\\x&/g')" | \
+ dd bs=14 count=1 conv=sync 2>/dev/null; \
+ cat $@; \
+ ) > $@.new
+ ( \
+ header_crc="$$(head -c116 $@.new | gzip -c | tail -c8 | \
+ od -An -tx4 -N4 --endian little)"; \
+ printf "$$(echo $$header_crc | sed 's/../\\x&/g')"; \
+ ) | dd of=$@.new bs=4 oflag=seek_bytes seek=110 conv=notrunc
+
+ mv $@.new $@
+endef
+
define Build/znet-header
$(eval version=$(word 1,$(1)))
( \
( \
type_fw_date=$$(printf "01%02x%02x%02x" \
- $$(date -d "@$(SOURCE_DATE_EPOCH)" "+%y %m %d")); \
+ $$(date -d "@$(SOURCE_DATE_EPOCH)" "+%-y %-m %-d")); \
hw_fw_ver=$$(printf "%02x%02x%02x%02x" \
$(hw_ver) $$(echo $(fw_ver) | cut -d. -f-3 | tr . ' ')); \
fw_len_crc=$$(gzip -c $@ | tail -c 8 | od -An -tx8 | tr -d ' \n'); \
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
+define Device/nand
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ KERNEL_SIZE := 4096k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
define Device/adslr_g7
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
endef
TARGET_DEVICES += afoundry_ew1200
+define Device/alfa-network_ax1800rm
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 15488k
+ DEVICE_VENDOR := ALFA Network
+ DEVICE_MODEL := AX1800RM
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+ KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ IMAGES += recovery.bin
+ IMAGE/recovery.bin := append-kernel | append-rootfs | pad-rootfs | check-size
+endef
+TARGET_DEVICES += alfa-network_ax1800rm
+
define Device/alfa-network_quad-e4g
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
TARGET_DEVICES += alfa-network_quad-e4g
define Device/ampedwireless_ally_common
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := Amped Wireless
DEVICE_PACKAGES := kmod-mt7615-firmware
IMAGE_SIZE := 32768k
- KERNEL_SIZE := 4096k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma -n 'flashable-initramfs' |\
edimax-header -s CSYS -m RN68 -f 0x001c0000 -S 0x01100000
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/ampedwireless_ally-r1900k
IMAGE_SIZE := 32128k
KERNEL_SIZE := 4352k
UBINIZE_OPTS := -E 5
- BLOCKSIZE := 64k
PAGESIZE := 1
SUBPAGESIZE := 1
VID_HDR_OFFSET := 64
define Device/asiarf_ap7621-001
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := AsiaRF
DEVICE_MODEL := AP7621-001
define Device/asiarf_ap7621-nv1
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := AsiaRF
DEVICE_MODEL := AP7621-NV1
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RP-AC56
IMAGE_SIZE := 16000k
- BLOCKSIZE := 64k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 \
kmod-i2c-ralink kmod-sound-mt7620 -uboot-envtools
IMAGES += factory.bin
TARGET_DEVICES += asus_rt-ac57u-v1
define Device/asus_rt-ac65p
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC65P
IMAGE_SIZE := 51200k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
TARGET_DEVICES += asus_rt-ac65p
define Device/asus_rt-ac85p
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC85P
IMAGE_SIZE := 51200k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
TARGET_DEVICES += asus_rt-n56u-b1
define Device/asus_rt-ax53u
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX53U
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-AX1800U
IMAGE_SIZE := 51200k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3 kmod-usb-ledtrig-usbport
TARGET_DEVICES += asus_rt-ax53u
define Device/asus_rt-ax54
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX54
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT2_VENDOR := ASUS
DEVICE_ALT2_MODEL := RT-AX1800S
IMAGE_SIZE := 51200k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7915-firmware
TARGET_DEVICES += asus_rt-ax54
define Device/beeline_smartbox-flash
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox Flash
IMAGE_SIZE := 32768k
KERNEL_SIZE := 4352k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x746f435d | pad-to $$(KERNEL_SIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | append-ubi | check-size
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware uencrypt-mbedtls
endef
TARGET_DEVICES += beeline_smartbox-flash
endef
TARGET_DEVICES += beeline_smartbox-giga
+define Device/beeline_smartbox-pro
+ $(Device/sercomm_s1500)
+ DEVICE_VENDOR := Beeline
+ DEVICE_MODEL := SmartBox PRO
+ DEVICE_ALT0_VENDOR := Sercomm
+ DEVICE_ALT0_MODEL := S1500 AWI
+ IMAGE_SIZE := 34816k
+ IMAGE/factory.img := append-kernel | sercomm-kernel-factory | \
+ sercomm-reset-slot1-chksum | append-ubi | check-size | \
+ sercomm-factory-cqr | sercomm-append-tail | sercomm-mkhash
+ SERCOMM_HWID := AWI
+ SERCOMM_HWVER := 10000
+ SERCOMM_ROOTFS2_OFFSET := 0x3d00000
+ SERCOMM_SWVER := 2020
+endef
+TARGET_DEVICES += beeline_smartbox-pro
+
define Device/beeline_smartbox-turbo
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
endef
TARGET_DEVICES += beeline_smartbox-turbo
+define Device/beeline_smartbox-turbo-plus
+ $(Device/sercomm_cxx)
+ IMAGE_SIZE := 32768k
+ SERCOMM_HWID := CQR
+ SERCOMM_HWVER := 10000
+ SERCOMM_SWVER := 2010
+ DEVICE_VENDOR := Beeline
+ DEVICE_MODEL := SmartBox TURBO+
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += beeline_smartbox-turbo-plus
+
define Device/belkin_rt1800
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 49152k
DEVICE_VENDOR := Belkin
DEVICE_MODEL := RT1800
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3
- UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | belkin-header RT18 1 9.9.9
endef
endef
TARGET_DEVICES += bolt_arion
+define Device/comfast_cf-e390ax
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 15808k
+ DEVICE_VENDOR := ComFast
+ DEVICE_MODEL := CF-E390AX
+ DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ check-size | append-metadata
+ IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
+endef
+TARGET_DEVICES += comfast_cf-e390ax
+
+define Device/comfast_cf-ew72-v2
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 15808k
+ DEVICE_VENDOR := ComFast
+ DEVICE_MODEL := CF-EW72 V2
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
+ -uboot-envtools
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ check-size | append-metadata
+ IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
+endef
+TARGET_DEVICES += comfast_cf-ew72-v2
+
define Device/cudy_m1800
$(Device/dsa-migration)
DEVICE_VENDOR := Cudy
endef
TARGET_DEVICES += cudy_wr1300-v2
+define Device/cudy_wr1300-v3
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 15872k
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := WR1300
+ DEVICE_VARIANT := v3
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
+ -uboot-envtools
+ SUPPORTED_DEVICES += cudy,wr1300 R30
+endef
+TARGET_DEVICES += cudy_wr1300-v3
+
define Device/cudy_wr2100
$(Device/dsa-migration)
DEVICE_VENDOR := Cudy
endef
TARGET_DEVICES += cudy_x6-v2
-define Device/dlink_dap-1620-b1
+define Device/dlink_covr-x1860-a1
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 8192k
+ IMAGE_SIZE := 40960k
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := COVR-X1860
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+ UBINIZE_OPTS := -E 5
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
+ append-squashfs4-fakeroot
+ IMAGES += factory.bin recovery.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
+ append-ubi | check-size
+ IMAGE/factory.bin := $$(IMAGE/recovery.bin) | \
+ append-dlink-covr-metadata $$(DEVICE_MODEL) | \
+ dlink-sge-image $$(DEVICE_MODEL)
+endef
+TARGET_DEVICES += dlink_covr-x1860-a1
+
+define Device/dlink_dxx-1xx0-x1
DEVICE_VENDOR := D-Link
+ DEVICE_PACKAGES := kmod-mt7615-firmware rssileds -uboot-envtools
+ IMAGE_SIZE := 16064k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | append-rootfs | \
+ pad-rootfs -x 60 | append-md5sum-ascii-salted ffff | \
+ append-string $$$$(DLINK_HWID) | check-size
+endef
+
+define Device/dlink_dap-1620-b1
+ $(Device/dlink_dxx-1xx0-x1)
DEVICE_MODEL := DAP-1620
DEVICE_VARIANT := B1
- DEVICE_PACKAGES := kmod-mt7615-firmware rssileds
DLINK_HWID := MT76XMT7621-RP-PR2475-NA
- IMAGE_SIZE := 16064k
- IMAGES += factory.bin
- IMAGE/factory.bin := $$(sysupgrade_bin) | \
- check-size 11009992 | pad-to 11009992 | \
- append-md5sum-ascii-salted ffff | \
- append-string $$(DLINK_HWID) | \
- check-size
endef
TARGET_DEVICES += dlink_dap-1620-b1
define Device/dlink_dap-x1860-a1
- $(Device/dsa-migration)
+ $(Device/nand)
IMAGE_SIZE := 53248k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-X1860
DEVICE_VARIANT := A1
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
KERNEL_SIZE := 8192k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size | elx-header 011b0060 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7915-firmware rssileds -uboot-envtools
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
KERNEL := $$(KERNEL) | uimage-sgehdr
- IMAGES += factory.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
- check-size | append-metadata
- IMAGE/factory.bin := append-kernel | append-rootfs | check-size
+ IMAGES += recovery.bin factory.bin
+ IMAGE/recovery.bin := append-kernel | append-rootfs | check-size
+ IMAGE/factory.bin := $$(IMAGE/recovery.bin) | dlink-sge-image $$$$(DEVICE_MODEL)
endef
define Device/dlink_dir-8xx-r1
endef
define Device/dlink_dir-xx60-a1
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 40960k
- UBINIZE_OPTS := -E 5
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
KERNEL := $$(KERNEL) | uimage-sgehdr
- IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+ IMAGES += recovery.bin
+ IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
endef
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-853
DEVICE_VARIANT := A3
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(IMAGE/recovery.bin) | dlink-sge-image $$(DEVICE_MODEL)
endef
TARGET_DEVICES += dlink_dir-853-a3
endef
TARGET_DEVICES += dlink_dir-882-r1
+define Device/dlink_dra-1360-a1
+ $(Device/dlink_dxx-1xx0-x1)
+ DEVICE_MODEL := DRA-1360
+ DEVICE_VARIANT := A1
+ DLINK_HWID := MT76XMT7621-RP-RA1360-NA
+endef
+TARGET_DEVICES += dlink_dra-1360-a1
+
define Device/dual-q_h721
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
- DEVICE_VENDOR := Newifi
- DEVICE_MODEL := D2
+ DEVICE_VENDOR := D-Team
+ DEVICE_MODEL := Newifi D2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
- DEVICE_MODEL := Personal Cloud One
+ DEVICE_MODEL := GB-PC1
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 \
-wpad-basic-mbedtls -uboot-envtools
IMAGE_SIZE := 32448k
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
- DEVICE_MODEL := Personal Cloud Two
+ DEVICE_MODEL := GB-PC2
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 \
-wpad-basic-mbedtls -uboot-envtools
IMAGE_SIZE := 32448k
TARGET_DEVICES += hanyang_hyc-g920
define Device/h3c_tx180x
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
+ $(Device/nand)
KERNEL_SIZE := 8192k
IMAGE_SIZE := 120832k
- UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL_INITRAMFS := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL := $$(KERNEL_INITRAMFS) | h3c-blank-header
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_VENDOR := H3C
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
TARGET_DEVICES += h3c_tx1806
define Device/haier-sim_wr1800k
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 125440k
- UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
haier-sim_wr1800k-factory
endif
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
TARGET_DEVICES += hilink_hlk-7621a-evb
define Device/hiwifi_hc5962
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 32768k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := HiWiFi
TARGET_DEVICES += iodata_wn-ax1167gr
define Device/iodata_nand
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := I-O DATA
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 51200k
LOADER_TYPE := bin
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma | uImage lzma
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
# The OEM webinterface expects an kernel with initramfs which has the uImage
endef
TARGET_DEVICES += iodata_wn-ax2033gr
+define Device/iodata_wn-deax1800gr
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := I-O DATA
+ DEVICE_MODEL := WN-DEAX1800GR
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 6144k
+ IMAGE_SIZE := 47104k
+ UBINIZE_OPTS := -E 5
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ ARTIFACTS := initramfs-factory.bin
+ ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
+ check-size | xor-image -p 29944a25120984c2 -x | \
+ iodata-mstc-header2 WN-DEAX1800GR 00021003
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+endef
+TARGET_DEVICES += iodata_wn-deax1800gr
+
define Device/iodata_wn-dx1167r
$(Device/iodata_nand)
DEVICE_MODEL := WN-DX1167R
TARGET_DEVICES += iptime_a3004ns-dual
define Device/iptime_a3004t
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
FILESYSTEMS := squashfs
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 129280k
UIMAGE_NAME := a3004t
- UBINIZE_OPTS := -E 5
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3004T
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
TARGET_DEVICES += iptime_a8004t
define Device/iptime_ax2004m
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 121344k
- UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += recovery.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size | iptime-crc32 ax2004m
DEVICE_VENDOR := ipTIME
TARGET_DEVICES += iptime_ax2004m
define Device/iptime_t5004
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 129280k
- UBINIZE_OPTS := -E 5
UIMAGE_NAME := t5004
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := T5004
DEVICE_PACKAGES := -wpad-basic-mbedtls -uboot-envtools
TARGET_DEVICES += jcg_jhr-ac876m
define Device/jcg_q20
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 91136k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := JCG
define Device/keenetic_kn-3010
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 64k
IMAGE_SIZE := 31488k
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-3010
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
- DEVICE_VENDOR := Newifi
- DEVICE_MODEL := D1
+ DEVICE_VENDOR := Lenovo
+ DEVICE_MODEL := Newifi D1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += newifi-d1
TARGET_DEVICES += lenovo_newifi-d1
define Device/linksys_e5600
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E5600
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
- UBINIZE_OPTS := -E 5
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | gemtek-trailer
endef
TARGET_DEVICES += linksys_e7350
define Device/linksys_ea7xxx
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 36864k
DEVICE_VENDOR := Linksys
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
- UBINIZE_OPTS := -E 5
IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
endef
define Device/mediatek_mt7621-eval-board
$(Device/dsa-migration)
- BLOCKSIZE := 64k
IMAGE_SIZE := 15104k
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7621 EVB
endef
TARGET_DEVICES += mediatek_mt7621-eval-board
+define Device/meig_slt866
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 15104k
+ DEVICE_VENDOR := MeiG
+ DEVICE_MODEL := SLT866
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
+ kmod-usb-net-qmi-wwan kmod-usb-serial-option kmod-usb3 \
+ kmod-usb-net-rndis
+endef
+TARGET_DEVICES += meig_slt866
+
define Device/mercusys_mr70x-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
- DEVICE_VENDOR := Mercusys
+ DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MR70X
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
define Device/MikroTik
$(Device/dsa-migration)
DEVICE_VENDOR := MikroTik
- BLOCKSIZE := 64k
IMAGE_SIZE := 16128k
DEVICE_PACKAGES := kmod-usb3 -uboot-envtools
KERNEL_NAME := vmlinuz
TARGET_DEVICES += mtc_wr1201
define Device/mts_wg430223
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := MTS
DEVICE_MODEL := WG430223
IMAGE_SIZE := 32768k
KERNEL_SIZE := 4352k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x53485231 | pad-to $$(KERNEL_SIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | append-ubi | check-size
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7615-firmware uencrypt-mbedtls
endef
TARGET_DEVICES += mts_wg430223
+define Device/netgear_eax12
+ $(Device/nand)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := EAX12
+ DEVICE_ALT0_VENDOR := NETGEAR
+ DEVICE_ALT0_MODEL := EAX11
+ DEVICE_ALT0_VARIANT := v2
+ DEVICE_ALT1_VENDOR := NETGEAR
+ DEVICE_ALT1_MODEL := EAX15
+ DEVICE_ALT1_VARIANT := v2
+ DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
+ NETGEAR_ENC_MODEL := EAX12
+ NETGEAR_ENC_REGION := US
+ NETGEAR_ENC_HW_ID_LIST := 1010000004540000_NETGEAR
+ NETGEAR_ENC_MODEL_LIST := EAX12;EAX11v2;EAX15v2
+ IMAGE_SIZE := 57344k
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
+ append-squashfs4-fakeroot
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
+ append-ubi | check-size | netgear-encrypted-factory
+endef
+TARGET_DEVICES += netgear_eax12
+
define Device/netgear_ex6150
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
TARGET_DEVICES += netgear_ex6150
define Device/netgear_sercomm_nand
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGES += factory.img kernel.bin rootfs.bin
IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | \
append-ubi | pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-ubi | check-size
DEVICE_VENDOR := NETGEAR
TARGET_DEVICES += netgear_wac124
define Device/netgear_wax202
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := WAX202
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
NETGEAR_ENC_MODEL := WAX202
NETGEAR_ENC_REGION := US
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 38912k
- KERNEL_SIZE := 4096k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | netgear-encrypted-factory
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += netgear_wax202
TARGET_DEVICES += netgear_wndr3700-v5
define Device/netis_wf2881
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
FILESYSTEMS := squashfs
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 129280k
- UBINIZE_OPTS := -E 5
UIMAGE_NAME := WF2881_0.0.00
KERNEL_INITRAMFS := $$(KERNEL) | netis-tail WF2881
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := NETIS
TARGET_DEVICES += planex_vr500
define Device/raisecom_msg1500-x-00
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 129280k
- UBINIZE_OPTS := -E 5
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_VENDOR := RAISECOM
DEVICE_MODEL := MSG1500
DEVICE_VARIANT := X.00
TARGET_DEVICES += samknows_whitebox-v8
define Device/sercomm_na502
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
IMAGE_SIZE := 20480k
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
DEVICE_VENDOR := SERCOMM
DEVICE_MODEL := NA502
DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3 -uboot-envtools
TARGET_DEVICES += sercomm_na502
define Device/sercomm_na502s
- $(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
+ $(Device/nand)
IMAGE_SIZE := 20971520
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
DEVICE_VENDOR := SERCOMM
DEVICE_MODEL := NA502S
DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3 kmod-usb-serial \
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Telco Electronics
DEVICE_MODEL := X1
- DEVICE_PACKAGES := kmod-usb3 kmod-mt76 -uboot-envtools
+ DEVICE_PACKAGES := kmod-usb3 kmod-mt7603 kmod-mt76x2 -uboot-envtools
endef
TARGET_DEVICES += telco-electronics_x1
endef
TARGET_DEVICES += tplink_eap235-wall-v1
+define Device/tplink_eap613-v1
+ $(Device/dsa-migration)
+ $(Device/tplink-safeloader)
+ DEVICE_MODEL := EAP613
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
+ TPLINK_BOARD_ID := EAP610-V3
+ KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | pad-to 64k
+ KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
+ IMAGE_SIZE := 13248k
+endef
+TARGET_DEVICES += tplink_eap613-v1
+
define Device/tplink_eap615-wall-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
TARGET_DEVICES += tplink_eap615-wall-v1
define Device/tplink_ec330-g5u-v1
- $(Device/dsa-migration)
+ $(Device/nand)
LOADER := bin
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 49152k
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := EC330-G5u
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata | check-size
endef
TARGET_DEVICES += tplink_ec330-g5u-v1
define Device/tplink_er605-v2
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := ER605
DEVICE_VARIANT := v2
DEVICE_PACKAGES := -wpad-basic-mbedtls kmod-usb3 -uboot-envtools
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
KERNEL_IN_UBI := 1
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += sysupgrade.tar
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE_SIZE := 127744k
endef
TARGET_DEVICES += tplink_er605-v2
+define Device/tplink_ex220-v1
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := EX220
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
+ TPLINK_BOARD_ID := EX220-V1
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ IMAGE_SIZE := 15744k
+endef
+TARGET_DEVICES += tplink_ex220-v1
+
define Device/tplink_mr600-v2-eu
$(Device/dsa-migration)
$(Device/tplink-v2)
TPLINK_FLASHLAYOUT := 16Mltq
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb-net-qmi-wwan uqmi kmod-usb3 -uboot-envtools
+ IMAGE/factory.bin := tplink-v2-image -e -a 0x10000
+ IMAGE/sysupgrade.bin := tplink-v2-image -s -e -a 0x10000 | check-size | \
+ append-metadata
KERNEL := $(KERNEL_DTB) | uImage lzma
KERNEL_INITRAMFS := $$(KERNEL) | tplink-v2-header
TPLINK_BOARD_ID := MR600-V2-EU
define Device/wavlink_ws-wn572hp3-4g
$(Device/dsa-migration)
- BLOCKSIZE := 64k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WS-WN572HP3
DEVICE_VARIANT := 4G
endef
TARGET_DEVICES += wavlink_ws-wn572hp3-4g
+
+define Device/wavlink_wl-wn573hx1
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 15808k
+ DEVICE_VENDOR := Wavlink
+ DEVICE_MODEL := WL-WN573HX1
+ DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ check-size | append-metadata
+ IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
+endef
+TARGET_DEVICES += wavlink_wl-wn573hx1
+
define Device/wevo_11acnas
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += wevo_w2914ns-v2
+define Device/wifire_s1500-nbn
+ $(Device/sercomm_s1500)
+ DEVICE_VENDOR := WiFire
+ DEVICE_MODEL := S1500.NBN
+ DEVICE_ALT0_VENDOR := Sercomm
+ DEVICE_ALT0_MODEL := S1500 BUC
+ IMAGE_SIZE := 51200k
+ IMAGE/factory.img := append-kernel | sercomm-kernel-factory | \
+ sercomm-reset-slot1-chksum | append-ubi | check-size | \
+ sercomm-factory-cqr | sercomm-pid-setbit 0x13 | sercomm-mkhash | \
+ sercomm-crypto
+ SERCOMM_HWID := BUC
+ SERCOMM_HWVER := 10000
+ SERCOMM_ROOTFS2_OFFSET := 0x4d00000
+ SERCOMM_SWVER := 2015
+endef
+TARGET_DEVICES += wifire_s1500-nbn
+
define Device/winstars_ws-wn583a6
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
TARGET_DEVICES += winstars_ws-wn583a6
define Device/xiaomi_nand_separate
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Xiaomi
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGES += kernel1.bin rootfs0.bin
IMAGE/kernel1.bin := append-kernel
IMAGE/rootfs0.bin := append-ubi | check-size
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/xiaomi_mi-router-3g
TARGET_DEVICES += xiaomi_mi-router-3g-v2
define Device/xiaomi_mi-router-3-pro
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE:= 4096k
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 255488k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 3 Pro
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport
TARGET_DEVICES += xiaomi_mi-router-ac2100
define Device/xiaomi_mi-router-cr660x
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Xiaomi
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 128512k
IMAGES += firmware.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/firmware.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES += kmod-mt7915-firmware
endef
TARGET_DEVICES += zbtlink_zbt-wg1608-16m
+define Device/zbtlink_zbt-wg1608-32m
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 32448k
+ DEVICE_VENDOR := Zbtlink
+ DEVICE_MODEL := ZBT-WG1608
+ DEVICE_VARIANT := 32M
+ DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \
+ kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += zbtlink_zbt-wg1608-32m
+
define Device/zbtlink_zbt-wg2626
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
TARGET_DEVICES += zio_freezio
define Device/zyxel_lte3301-plus
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
+ $(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := LTE3301-PLUS
+ KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport \
kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
KERNEL := $(KERNEL_DTB) | uImage lzma | \
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_lte3301-plus
+define Device/zyxel_lte5398-m904
+ $(Device/nand)
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := LTE5398-M904
+ KERNEL_SIZE := 31488k
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3 uqmi \
+ kmod-usb-net-qmi-wwan kmod-usb-serial-option kmod-usb-ledtrig-usbport
+ KERNEL := $(KERNEL_DTB) | uImage lzma | \
+ zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
+ zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
+ KERNEL_INITRAMFS_SUFFIX := -recovery.bin
+endef
+TARGET_DEVICES += zyxel_lte5398-m904
+
define Device/zyxel_nr7101
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
+ $(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NR7101
+ KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
KERNEL := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) 9.99(ABUV.9)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_nr7101
define Device/zyxel_nwa-ax
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ZyXEL
- BLOCKSIZE := 128k
- PAGESIZE := 2048
KERNEL_SIZE := 8192k
- UBINIZE_OPTS := -E 5
DEVICE_PACKAGES := kmod-mt7915-firmware zyxel-bootconfig
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += factory.bin ramboot-factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | zyxel-nwa-fit
IMAGE/ramboot-factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/zyxel_nwa50ax
TARGET_DEVICES += zyxel_nwa55axe
define Device/zyxel_wap6805
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 32448k
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WAP6805
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7621-qtn-rgmii -uboot-envtools
KERNEL := $$(KERNEL/lzma-loader) | uImage none | uimage-padhdr 160
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_wap6805
define Device/zyxel_wsm20
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
+ $(Device/nand)
KERNEL_SIZE := 8192k
IMAGE_SIZE := 41943040
- UBINIZE_OPTS := -E 5
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WSM20
DEVICE_PACKAGES := kmod-mt7915-firmware
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_wsm20