# MT7621 Profiles
#
+include ./common-sercomm.mk
include ./common-tp-link.mk
DEFAULT_SOC := mt7621
DTS_CPPFLAGS += -DDTS_LEGACY
endif
-define Build/beeline-trx
+define Build/arcadyan-trx
echo -ne "hsqs" > $@.hsqs
- $(STAGING_DIR_HOST)/bin/otrx create $@.trx -M 0x746f435d -f $@ \
+ $(eval trx_magic=$(word 1,$(1)))
+ $(STAGING_DIR_HOST)/bin/otrx create $@.trx -M $(trx_magic) -f $@ \
-a 0x20000 -b 0x420000 -f $@.hsqs -a 1000
mv $@.trx $@
dd if=/dev/zero bs=1024 count=1 >> $@.tail
printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@
endef
-define Build/iodata-factory
- $(eval fw_size=$(word 1,$(1)))
- $(eval fw_type=$(word 2,$(1)))
- $(eval product=$(word 3,$(1)))
- $(eval factory_bin=$(word 4,$(1)))
- if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(fw_size)" ]; then \
- $(CP) $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) $(factory_bin); \
- $(STAGING_DIR_HOST)/bin/mksenaofw \
- -r 0x30a -p $(product) -t $(fw_type) \
- -e $(factory_bin) -o $(factory_bin).new; \
- mv $(factory_bin).new $(factory_bin); \
- $(CP) $(factory_bin) $(BIN_DIR)/; \
- else \
- echo "WARNING: initramfs kernel image too big, cannot generate factory image (actual $$(stat -c%s $@); max $(fw_size))" >&2; \
- fi
+define Build/h3c-blank-header
+ dd if=/dev/zero of=$@.blank bs=160 count=1
+ cat $@ >> $@.blank
+ mv $@.blank $@
+endef
+
+define Build/haier-sim_wr1800k-factory
+ mkdir -p "$@.tmp"
+ mv "$@" "$@.tmp/UploadBrush-bin.img"
+ $(MKHASH) md5 "$@.tmp/UploadBrush-bin.img" | head -c32 > "$@.tmp/check_MD5.txt"
+ $(TAR) -czf "$@.tmp.tgz" -C "$@.tmp" UploadBrush-bin.img check_MD5.txt
+ $(STAGING_DIR_HOST)/bin/openssl aes-256-cbc -e -salt -in "$@.tmp.tgz" -out "$@" -k QiLunSmartWL
+ printf %32s $(DEVICE_MODEL) >> "$@"
+ rm -rf "$@.tmp" "$@.tmp.tgz"
endef
define Build/iodata-mstc-header
)
endef
+define Build/belkin-header
+ $(eval magic=$(word 1,$(1)))
+ $(eval hw_ver=$(word 2,$(1)))
+ $(eval fw_ver=$(word 3,$(1)))
+
+ ( \
+ type_fw_date=$$(printf "01%02x%02x%02x" \
+ $$(date -d "@$(SOURCE_DATE_EPOCH)" "+%y %m %d")); \
+ hw_fw_ver=$$(printf "%02x%02x%02x%02x" \
+ $(hw_ver) $$(echo $(fw_ver) | cut -d. -f-3 | tr . ' ')); \
+ fw_len_crc=$$(gzip -c $@ | tail -c 8 | od -An -tx8 | tr -d ' \n'); \
+ fw_crc_len="$${fw_len_crc:8:8}$${fw_len_crc:0:8}"; \
+ \
+ printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
+ printf "$$(echo $${type_fw_date}$${hw_fw_ver} | \
+ sed 's/../\\x&/g')"; \
+ printf "$$(echo $${fw_crc_len}$${fw_crc_len} | \
+ sed 's/../\\x&/g')"; \
+ printf "\x5c\x78\x00\x00"; \
+ cat $@; \
+ ) > $@.new
+ mv $@.new $@
+endef
+
define Build/ubnt-erx-factory-image
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
echo '21001:7' > $(1).compat; \
mv $@.new $@
endef
+define Build/zyxel-nwa-fit
+ $(TOPDIR)/scripts/mkits-zyxel-fit.sh \
+ $@.its $@ "6b e1 6f e1 ff ff ff ff ff ff"
+ PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+ @mv $@.new $@
+endef
+
define Device/dsa-migration
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
TARGET_DEVICES += asiarf_ap7621-nv1
+define Device/asus_rp-ac56
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := RP-AC56
+ IMAGE_SIZE := 16000k
+ BLOCKSIZE := 64k
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 \
+ kmod-i2c-ralink kmod-sound-mt7620
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ check-size | append-metadata
+endef
+TARGET_DEVICES += asus_rp-ac56
+
+define Device/asus_rp-ac87
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 16064k
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := RP-AC87
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ check-size | append-metadata
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware rssileds
+endef
+TARGET_DEVICES += asus_rp-ac87
+
define Device/asus_rt-ac57u
$(Device/dsa-migration)
DEVICE_VENDOR := ASUS
define Device/asus_rt-n56u-b1
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-N56U
DEVICE_VARIANT := B1
endef
TARGET_DEVICES += asus_rt-n56u-b1
+define Device/asus_rt-ax53u
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := RT-AX53U
+ IMAGE_SIZE := 51200k
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+ check-size
+ DEVICE_PACKAGES := kmod-mt7915e kmod-usb3 uboot-envtools \
+ kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ax53u
+
define Device/beeline_smartbox-flash
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
- uImage none | beeline-trx | pad-to $$(KERNEL_SIZE)
+ uImage none | arcadyan-trx 0x746f435d | pad-to $$(KERNEL_SIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | append-ubi | check-size
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e kmod-mt7615-firmware \
- uboot-envtools
+ uboot-envtools uencrypt
endef
TARGET_DEVICES += beeline_smartbox-flash
+define Device/beeline_smartbox-giga
+ $(Device/sercomm_dxx)
+ IMAGE_SIZE := 24576k
+ SERCOMM_HWID := DBE
+ SERCOMM_HWVER := 10100
+ SERCOMM_SWVER := 1001
+ DEVICE_VENDOR := Beeline
+ DEVICE_MODEL := SmartBox GIGA
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
+ kmod-usb3 uboot-envtools
+endef
+TARGET_DEVICES += beeline_smartbox-giga
+
+define Device/beeline_smartbox-turbo
+ $(Device/sercomm_dxx)
+ IMAGE_SIZE := 32768k
+ SERCOMM_HWID := DF3
+ SERCOMM_HWVER := 10200
+ SERCOMM_SWVER := 1004
+ DEVICE_VENDOR := Beeline
+ DEVICE_MODEL := SmartBox TURBO
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware \
+ kmod-usb3 uboot-envtools
+endef
+TARGET_DEVICES += beeline_smartbox-turbo
+
+define Device/belkin_rt1800
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 49152k
+ DEVICE_VENDOR := Belkin
+ DEVICE_MODEL := RT1800
+ DEVICE_PACKAGES := kmod-mt7915e kmod-usb3 uboot-envtools
+ UBINIZE_OPTS := -E 5
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
+ append-squashfs4-fakeroot
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+ append-ubi | check-size | belkin-header RT18 1 9.9.9
+endef
+TARGET_DEVICES += belkin_rt1800
+
define Device/buffalo_wsr-1166dhp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += bolt_arion
-define Device/cudy_wr1300
+define Device/cudy_m1800
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := M1800
+ IMAGE_SIZE := 16064k
+ UIMAGE_NAME := R17
+ DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += cudy_m1800
+
+define Device/cudy_wr1300-v1
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1300
+ DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb2 kmod-usb3 \
kmod-usb-ledtrig-usbport
+ SUPPORTED_DEVICES += cudy,wr1300 R10
endef
-TARGET_DEVICES += cudy_wr1300
+TARGET_DEVICES += cudy_wr1300-v1
+
+define Device/cudy_wr1300-v2
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 15872k
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := WR1300
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
+ SUPPORTED_DEVICES += cudy,wr1300 R23
+endef
+TARGET_DEVICES += cudy_wr1300-v2
define Device/cudy_wr2100
$(Device/dsa-migration)
endef
TARGET_DEVICES += dlink_dir-2660-a1
+define Device/dlink_dir-3060-a1
+ $(Device/dlink_dir-xx60-a1)
+ DEVICE_MODEL := DIR-3060
+ DEVICE_VARIANT := A1
+endef
+TARGET_DEVICES += dlink_dir-3060-a1
+
define Device/dlink_dir-853-a3
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-853
define Device/dlink_dir-860l-b1
$(Device/dsa-migration)
- $(Device/seama)
+ $(Device/seama-lzma-loader)
SEAMA_SIGNATURE := wrgac13_dlink.2013gui_dir860lb
- LOADER_TYPE := bin
- KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | relocate-kernel | \
- lzma -a0 | uImage lzma
IMAGE_SIZE := 16064k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-860L
endef
TARGET_DEVICES += elecom_wrc-2533gst2
+define Device/etisalat_s3
+ $(Device/sercomm_dxx)
+ IMAGE_SIZE := 32768k
+ SERCOMM_HWID := DDK
+ SERCOMM_HWVER := 10000
+ SERCOMM_SWVER := 4009
+ DEVICE_VENDOR := Etisalat
+ DEVICE_MODEL := S3
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware \
+ kmod-usb3 uboot-envtools
+endef
+TARGET_DEVICES += etisalat_s3
+
define Device/firefly_firewrt
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
define Device/gnubee_gb-pc1
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
DEVICE_MODEL := Personal Cloud One
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 -wpad-basic-wolfssl
define Device/gnubee_gb-pc2
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
DEVICE_MODEL := Personal Cloud Two
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 -wpad-basic-wolfssl
endef
TARGET_DEVICES += gnubee_gb-pc2
+define Device/h3c_tx180x
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 8192k
+ IMAGE_SIZE := 120832k
+ UBINIZE_OPTS := -E 5
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL_INITRAMFS := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ KERNEL := $$(KERNEL_INITRAMFS) | h3c-blank-header
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_VENDOR := H3C
+ DEVICE_PACKAGES := kmod-mt7915e uboot-envtools
+endef
+
+define Device/h3c_tx1800-plus
+ $(Device/h3c_tx180x)
+ DEVICE_MODEL := TX1800 Plus
+endef
+TARGET_DEVICES += h3c_tx1800-plus
+
+define Device/h3c_tx1801-plus
+ $(Device/h3c_tx180x)
+ DEVICE_MODEL := TX1801 Plus
+endef
+TARGET_DEVICES += h3c_tx1801-plus
+
+define Device/h3c_tx1806
+ $(Device/h3c_tx180x)
+ DEVICE_MODEL := TX1806
+endef
+TARGET_DEVICES += h3c_tx1806
+
+define Device/haier-sim_wr1800k
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 125440k
+ UBINIZE_OPTS := -E 5
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS := initramfs-factory.bin
+ ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
+ haier-sim_wr1800k-factory
+endif
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := kmod-mt7915e uboot-envtools
+endef
+
+define Device/haier_har-20s2u1
+ $(Device/haier-sim_wr1800k)
+ DEVICE_VENDOR := Haier
+ DEVICE_MODEL := HAR-20S2U1
+endef
+TARGET_DEVICES += haier_har-20s2u1
+
define Device/hilink_hlk-7621a-evb
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
define Device/hiwifi_hc5962
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15552k
- KERNEL_INITRAMFS := $$(KERNEL) | \
- iodata-factory 7864320 4 0x1055 $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.bin
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-AX1167GR
+ ARTIFACTS := initramfs-factory.bin
+ ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
+ check-size 7680k | senao-header -r 0x30a -p 0x1055 -t 4
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
endef
TARGET_DEVICES += iodata_wn-ax1167gr
define Device/jcg_q20
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5
endef
TARGET_DEVICES += jcg_y2
+define Device/keenetic_kn-3010
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := 31488k
+ DEVICE_VENDOR := Keenetic
+ DEVICE_MODEL := KN-3010
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
+ check-size | zyimage -d 8400912 -v "KN-3010"
+endef
+TARGET_DEVICES += keenetic_kn-3010
+
define Device/lenovo_newifi-d1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += linksys_e5600
+define Device/linksys_e7350
+ $(Device/belkin_rt1800)
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := E7350
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+ append-ubi | check-size | belkin-header GOLF 1 9.9.9
+endef
+TARGET_DEVICES += linksys_e7350
+
define Device/linksys_ea7xxx
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
define Device/linksys_re6500
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := RE6500
append-metadata
endef
+define Device/mikrotik_ltap-2hnd
+ $(Device/MikroTik)
+ DEVICE_MODEL := LtAP-2HnD
+ DEVICE_PACKAGES += kmod-ath9k kmod-pps-gpio rssileds
+endef
+TARGET_DEVICES += mikrotik_ltap-2hnd
+
define Device/mikrotik_routerboard-750gr3
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD 750Gr3
endef
TARGET_DEVICES += mtc_wr1201
+define Device/mts_wg430223
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ DEVICE_VENDOR := MTS
+ DEVICE_MODEL := WG430223
+ IMAGE_SIZE := 32768k
+ KERNEL_SIZE := 4352k
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
+ uImage none | arcadyan-trx 0x53485231 | pad-to $$(KERNEL_SIZE)
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
+ uImage none
+ IMAGES += factory.trx
+ IMAGE/factory.trx := append-kernel | append-ubi | check-size
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware uboot-envtools uencrypt
+endef
+TARGET_DEVICES += mts_wg430223
+
define Device/netgear_ex6150
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := EX6150
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += netgear_wac124
+define Device/netgear_wax202
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := WAX202
+ DEVICE_PACKAGES := kmod-mt7915e
+ NETGEAR_ENC_MODEL := WAX202
+ NETGEAR_ENC_REGION := US
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ IMAGE_SIZE := 38912k
+ KERNEL_SIZE := 4096k
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
+ append-squashfs4-fakeroot
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
+ append-ubi | check-size | netgear-encrypted-factory
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += netgear_wax202
+
define Device/netgear_wndr3700-v5
$(Device/dsa-migration)
$(Device/netgear_sercomm_nor)
define Device/netis_wf2881
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
BLOCKSIZE := 128k
PAGESIZE := 2048
FILESYSTEMS := squashfs
IMAGE_SIZE := 129280k
UBINIZE_OPTS := -E 5
UIMAGE_NAME := WF2881_0.0.00
- KERNEL_INITRAMFS := $(KERNEL_DTB) | netis-tail WF2881 | uImage lzma
+ KERNEL_INITRAMFS := $$(KERNEL) | netis-tail WF2881
IMAGES += factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
DEVICE_VENDOR := RAISECOM
DEVICE_MODEL := MSG1500
DEVICE_VARIANT := X.00
+ DEVICE_ALT0_VENDOR := Nokia
+ DEVICE_ALT0_MODEL := A-040W-Q
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport uboot-envtools
endef
endef
TARGET_DEVICES += renkforce_ws-wn530hp3-a
+define Device/rostelecom_rt-sf-1
+ $(Device/sercomm_dxx)
+ IMAGE_SIZE := 32768k
+ SERCOMM_HWID := DKG
+ SERCOMM_HWVER := 10110
+ SERCOMM_SWVER := 1026
+ DEVICE_VENDOR := Rostelecom
+ DEVICE_MODEL := RT-SF-1
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware \
+ kmod-usb3 uboot-envtools
+endef
+TARGET_DEVICES += rostelecom_rt-sf-1
+
define Device/samknows_whitebox-v8
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += sercomm_na502s
+define Device/sim_simax1800t
+ $(Device/haier-sim_wr1800k)
+ DEVICE_VENDOR := SIM
+ DEVICE_MODEL := SIMAX1800T
+endef
+TARGET_DEVICES += sim_simax1800t
+
+define Device/snr_snr-cpe-me2-lite
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 16064k
+ DEVICE_VENDOR := SNR
+ DEVICE_MODEL := SNR-CPE-ME2-Lite
+ UIMAGE_NAME := $$(DEVICE_MODEL)
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
+endef
+TARGET_DEVICES += snr_snr-cpe-me2-lite
+
define Device/storylink_sap-g3200u3
$(Device/dsa-migration)
IMAGE_SIZE := 7872k
endef
TARGET_DEVICES += tplink_eap615-wall-v1
+define Device/tplink_er605-v2
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := ER605
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := -wpad-basic-wolfssl kmod-usb3
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ KERNEL_IN_UBI := 1
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ IMAGES += sysupgrade.tar
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE_SIZE := 127744k
+endef
+TARGET_DEVICES += tplink_er605-v2
+
+define Device/tplink_mr600-v2-eu
+ $(Device/dsa-migration)
+ $(Device/tplink-v2)
+ DEVICE_MODEL := MR600
+ DEVICE_VARIANT := v2 (EU)
+ TPLINK_FLASHLAYOUT := 16Mltq
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
+ kmod-usb-net-qmi-wwan uqmi kmod-usb3
+ KERNEL := $(KERNEL_DTB) | uImage lzma
+ KERNEL_INITRAMFS := $$(KERNEL) | tplink-v2-header
+ TPLINK_BOARD_ID := MR600-V2-EU
+ IMAGE_SIZE := 16384k
+endef
+TARGET_DEVICES += tplink_mr600-v2-eu
+
define Device/tplink_re350-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi 6 Lite
DEVICE_DTS_CONFIG := config@1
+ DEVICE_DTS_LOADADDR := 0x87000000
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7915e
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE_SIZE := 15424k
endef
TARGET_DEVICES += ubnt_unifi-6-lite
+define Device/ubnt_unifi-flexhd
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi FlexHD
+ DEVICE_DTS_CONFIG := config@2
+ DEVICE_DTS_LOADADDR := 0x87000000
+ KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware kmod-leds-ubnt-ledbar
+ IMAGE_SIZE := 15552k
+endef
+TARGET_DEVICES += ubnt_unifi-flexhd
+
define Device/ubnt_unifi-nanohd
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi Switch Flex
DEVICE_DTS_CONFIG := config@1
+ DEVICE_DTS_LOADADDR := 0x87000000
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
- IMAGE_SIZE := 7360k
+ IMAGE_SIZE := 14720k
endef
TARGET_DEVICES += ubnt_usw-flex
endef
TARGET_DEVICES += unielec_u7621-06-16m
+define Device/unielec_u7621-06-32m
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 32448k
+ DEVICE_VENDOR := UniElec
+ DEVICE_MODEL := U7621-06
+ DEVICE_VARIANT := 32M
+ DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 -wpad-basic-wolfssl
+ SUPPORTED_DEVICES += unielec,u7621-06-32m
+endef
+TARGET_DEVICES += unielec_u7621-06-32m
+
define Device/unielec_u7621-06-64m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += wavlink_wl-wn533a8
+define Device/wavlink_ws-wn572hp3-4g
+ $(Device/dsa-migration)
+ BLOCKSIZE := 64k
+ DEVICE_VENDOR := Wavlink
+ DEVICE_MODEL := WS-WN572HP3
+ DEVICE_VARIANT := 4G
+ IMAGE_SIZE := 15040k
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | append-metadata
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
+ kmod-usb3 kmod-usb-net-rndis comgt-ncm
+endef
+TARGET_DEVICES += wavlink_ws-wn572hp3-4g
+
define Device/wevo_11acnas
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_MODEL := YK-L2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport
+ UIMAGE_MAGIC := 0x12291000
+ UIMAGE_NAME := 400000000000000000003000
endef
TARGET_DEVICES += youku_yk-l2
endef
TARGET_DEVICES += yuncore_ax820
+define Device/yuncore_fap640
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 15808k
+ DEVICE_VENDOR := YunCore
+ DEVICE_MODEL := FAP640
+ DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += yuncore_fap640
+
+define Device/yuncore_fap690
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 15808k
+ DEVICE_VENDOR := YunCore
+ DEVICE_MODEL := FAP690
+ DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += yuncore_fap690
+
define Device/zbtlink_zbt-we1326
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += zbtlink_zbt-wg1602-16m
+define Device/zbtlink_zbt-wg1602-v04-16m
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 16064k
+ DEVICE_VENDOR := Zbtlink
+ DEVICE_MODEL := ZBT-WG1602-V04
+ DEVICE_VARIANT := 16M
+ DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+ kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += zbtlink_zbt-wg1602-v04-16m
+
+define Device/zbtlink_zbt-wg1602-v04-32m
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 32128k
+ DEVICE_VENDOR := Zbtlink
+ DEVICE_MODEL := ZBT-WG1602-V04
+ DEVICE_VARIANT := 32M
+ DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+ kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += zbtlink_zbt-wg1602-v04-32m
+
define Device/zbtlink_zbt-wg1608-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
endef
TARGET_DEVICES += zio_freezio
+define Device/zyxel_lte3301-plus
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := LTE3301-PLUS
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
+ uboot-envtools kmod-usb-ledtrig-usbport kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option uqmi
+ KERNEL := $(KERNEL_DTB) | uImage lzma | \
+ zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
+ zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
+ KERNEL_INITRAMFS_SUFFIX := -recovery.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += zyxel_lte3301-plus
+
define Device/zyxel_nr7101
$(Device/dsa-migration)
BLOCKSIZE := 128k
endef
TARGET_DEVICES += zyxel_nr7101
+define Device/zyxel_nwa-ax
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := ZyXEL
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 8192k
+ UBINIZE_OPTS := -E 5
+ DEVICE_PACKAGES := kmod-mt7915e uboot-envtools zyxel-bootconfig
+ KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ IMAGES += factory.bin ramboot-factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | zyxel-nwa-fit
+ IMAGE/ramboot-factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/zyxel_nwa50ax
+ $(Device/zyxel_nwa-ax)
+ DEVICE_MODEL := NWA50AX
+endef
+TARGET_DEVICES += zyxel_nwa50ax
+
+define Device/zyxel_nwa55axe
+ $(Device/zyxel_nwa-ax)
+ DEVICE_MODEL := NWA55AXE
+endef
+TARGET_DEVICES += zyxel_nwa55axe
+
define Device/zyxel_wap6805
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WAP6805
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7621-qtn-rgmii
- KERNEL := $(KERNEL_DTB) | uImage lzma | uimage-padhdr 160
+ KERNEL := $$(KERNEL/lzma-loader) | uImage none | uimage-padhdr 160
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_wap6805