ramips: add support for Amped Wireless B1200EX

[openwrt/staging/stintel.git] / target / linux / ramips / mt7620 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index ea8394ec59c833f0dbad1b4c690bb982bd61f3fb..13f9453442cf85ce7fac57750a5554fbd999fc03 100644 (file)
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -38,6 +38,7 @@ ramips_setup_interfaces()
                        "3:lan" "4:wan" "6@eth0"
                ;;
        alfa-network,tube-e4g|\
+       ampedwireless,b1200ex|\
        buffalo,wmr-300|\
        dlink,dch-m225|\
        edimax,ew-7476rpc|\
@@ -54,6 +55,7 @@ ramips_setup_interfaces()
        netgear,ex6120|\
        netgear,ex6130|\
        netgear,wn3000rp-v3|\
+       netgear,wn3100rp-v2|\
        planex,cs-qr10|\
        planex,mzk-ex300np|\
        planex,mzk-ex750np|\
@@ -110,6 +112,7 @@ ramips_setup_interfaces()
                        "0:lan" "6@eth0"
                ;;
        dlink,dir-810l|\
+       netcore,nw5212|\
        netgear,jwnr2010-v5|\
        phicomm,k2-v22.4|\
        phicomm,k2-v22.5|\
@@ -130,6 +133,13 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "6@eth0"
                ;;
+       dlink,dwr-961-a1)
+               ucidef_add_switch "switch0" \
+                       "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" "0@eth0"
+               ucidef_add_switch "switch1" \
+                       "5:lan" "6@eth0"
+               ucidef_add_switch_attr "switch1" "enable" "false"
+               ;;
        edimax,br-6478ac-v2|\
        lb-link,bl-w1200|\
        tplink,archer-c2-v1)
@@ -194,6 +204,7 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch1" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
+       netgear,pr2000|\
        nexx,wt3020-4m|\
        nexx,wt3020-8m)
                ucidef_add_switch "switch0" \
@@ -219,10 +230,18 @@ ramips_setup_interfaces()
                        "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
                ucidef_set_interface_wan "usb0"
                ;;
+       wavlink,wl-wn535k1)
+               ucidef_add_switch "switch0" \
+                       "2:lan" "5:lan" "4:wan" "6@eth0"
+               ;;
        wavlink,wl-wn579x3)
                ucidef_add_switch "switch0" \
                        "5:lan" "4:wan" "6@eth0"
                ;;
+       youku,x2)
+               ucidef_add_switch "switch0" \
+                       "1:lan:2" "4:lan:1" "0:wan" "6@eth0"
+               ;;
        youku,yk-l1|\
        youku,yk-l1c)
                ucidef_add_switch "switch0" \
@@ -299,6 +318,7 @@ ramips_setup_macs()
        dlink,dwr-921-c1|\
        dlink,dwr-922-e2|\
        dlink,dwr-960|\
+       dlink,dwr-961-a1|\
        lava,lr-25g001)
                wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
                lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -353,6 +373,7 @@ ramips_setup_macs()
        ohyeah,oy-0001|\
        wavlink,wl-wn530hg4|\
        wevo,air-duo|\
+       youku,x2|\
        youku,yk-l1|\
        youku,yk-l1c)
                wan_mac=$(mtd_get_mac_binary factory 0x2e)
@@ -367,6 +388,10 @@ ramips_setup_macs()
        tplink,archer-mr200)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary rom 0xf100)" 1)
                ;;
+       wavlink,wl-wn535k1)
+               wan_mac=$(mtd_get_mac_binary factory 0x2e)
+               label_mac=$(mtd_get_mac_binary factory 0x8004)
+               ;;
        zbtlink,zbt-we1026-5g-16m)
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;