ramips: add support for TP-Link MR600 V2(EU)

[openwrt/staging/ansuel.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 14250aa1509f2bb405cec1ec32b408431dacd803..bfc654a23aa319ce141b236a4c32a3b436534a9d 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -100,6 +100,9 @@ ramips_setup_interfaces()
        tplink,tl-wpa8631p-v3)
                ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
                ;;
+       tplink,mr600-v2-eu)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+               ;;
        ubnt,edgerouter-x)
                ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
                ;;
@@ -216,6 +219,11 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr)
                label_mac=$lan_mac
                ;;
+       tplink,mr600-v2-eu)
+               label_mac=$(cat "/sys/class/net/eth0/address")
+               wwan_mac=$(macaddr_add $label_mac 1)
+               ucidef_set_interface "wwan0" device "/dev/cdc-wdm0" protocol "qmi" macaddr "$wwan_mac"
+               ;;
        mikrotik,routerboard-750gr3|\
        mikrotik,routerboard-760igs|\
        mikrotik,routerboard-m11g|\