ramips: add basic support for tp-link er605-v2

[openwrt/staging/stintel.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index b7121db64f078f24dda46bfefbdbc6225da794c2..f0ac4f1c4fdf5e06d382a6a716e6299fec9c0d69 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -99,6 +99,9 @@ ramips_setup_interfaces()
        tplink,eap615-wall-v1)
                ucidef_set_interface_lan "lan0 lan1 lan2 lan3"
                ;;
+       tplink,er605-v2)
+               ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
+               ;;
        tplink,tl-wpa8631p-v3)
                ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
                ;;
@@ -225,6 +228,12 @@ ramips_setup_macs()
                label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base")
                lan_mac=$label_mac
                ;;
+       tplink,er605-v2)
+               CI_UBIPART="firmware"
+               label_mac=$(mtd_get_mac_uci_config_ubi "tddp")
+               lan_mac=$label_mac
+               wan_mac=$(macaddr_add "$label_mac" 1)
+               ;;
        tplink,mr600-v2-eu)
                label_mac=$(cat "/sys/class/net/eth0/address")
                wwan_mac=$(macaddr_add $label_mac 1)