ramips: add support for Wavlink WL-WN578A2

[openwrt/staging/ynezz.git] / target / linux / ramips / mt76x8 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index 5ce44d0e9b25d94d4bd1d9ba14940d033edadb8d..d61a60591c5e6562d769420d61f5b7745d0fb1a2 100644 (file)
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -46,7 +46,8 @@ ramips_setup_interfaces()
                ;;
        buffalo,wcr-1166ds|\
        elecom,wrc-1167fs|\
-       wavlink,wl-wn577a2)
+       wavlink,wl-wn577a2|\
+       wavlink,wl-wn578a2)
                ucidef_add_switch "switch0" \
                        "3:lan" "4:wan" "6@eth0"
                ;;
@@ -168,7 +169,8 @@ ramips_setup_macs()
                ;;
        cudy,wr1000|\
        hilink,hlk-7688a|\
-       wavlink,wl-wn577a2)
+       wavlink,wl-wn577a2|\
+       wavlink,wl-wn578a2)
                wan_mac=$(mtd_get_mac_binary factory 0x2e)
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;