X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=config%2FConfig-kernel.in;h=4c191f0955baf0e083017391ddaea1ea24ceff7f;hb=7d963efc40702a6a88d33397bb3636ebe8a5a1e6;hp=437a6230d787eda92c2a21ce0266d6f380935cf7;hpb=7274db3b5a781608dd5fe0deba84a69615cf4615;p=openwrt%2Fstaging%2Fdedeckeh.git

diff --git a/config/Config-kernel.in b/config/Config-kernel.in
index 437a6230d7..4c191f0955 100644
--- a/config/Config-kernel.in
+++ b/config/Config-kernel.in
@@ -4,6 +4,22 @@
 # See /LICENSE for more information.
 #
 
+config KERNEL_BUILD_USER
+	string "Custom Kernel Build User Name"
+	default ""
+	help
+	  Sets the Kernel build user string, which for example will be returned
+	  by 'uname -a' on running systems.
+	  If not set, uses system user at build time.
+
+config KERNEL_BUILD_DOMAIN
+	string "Custom Kernel Build Domain Name"
+	default ""
+	help
+	  Sets the Kernel build domain string, which for example will be
+	  returned by 'uname -a' on running systems.
+	  If not set, uses system hostname at build time.
+
 config KERNEL_PRINTK
 	bool "Enable support for printk"
 	default y
@@ -26,9 +42,15 @@ config KERNEL_DEBUG_FS
 	  write to these files. Many common debugging facilities, such as
 	  ftrace, require the existence of debugfs.
 
+config KERNEL_ARM_PMU
+	bool
+	default n
+	depends on (arm || arm64)
+
 config KERNEL_PERF_EVENTS
 	bool
 	default n
+	select KERNEL_ARM_PMU if (arm || arm64)
 
 config KERNEL_PROFILING
 	bool "Compile the kernel with profiling enabled"
@@ -103,7 +125,7 @@ config KERNEL_DEBUG_LL
 	help
 	  ARM low level debugging.
 
-config KERNEL_DYNAMIC_DEBUG 
+config KERNEL_DYNAMIC_DEBUG
 	bool "Compile the kernel with dynamic printk"
 	select KERNEL_DEBUG_FS
 	default n
@@ -127,6 +149,23 @@ config KERNEL_EARLY_PRINTK
 	  debugging purposes to send messages over the serial console in early boot.
 	  Enable this to debug early boot problems.
 
+config KERNEL_KPROBES
+	bool "Compile the kernel with kprobes support"
+	default n
+	select KERNEL_FTRACE
+	select KERNEL_PERF_EVENTS
+	help
+	  Compiles the kernel with KPROBES support, which allows you to trap
+	  at almost any kernel address and execute a callback function.
+	  register_kprobe() establishes a probepoint and specifies the
+	  callback. Kprobes is useful for kernel debugging, non-intrusive
+	  instrumentation and testing.
+	  If in doubt, say "N".
+
+config KERNEL_KPROBE_EVENT
+	bool
+	default y if KERNEL_KPROBES
+
 config KERNEL_AIO
 	bool "Compile the kernel with asynchronous IO support"
 	default n
@@ -135,6 +174,18 @@ config KERNEL_DIRECT_IO
 	bool "Compile the kernel with direct IO support"
 	default n
 
+config KERNEL_FHANDLE
+	bool "Compile the kernel with support for fhandle syscalls"
+	default n
+
+config KERNEL_FANOTIFY
+	bool "Compile the kernel with modern file notification support"
+	default n
+
+config KERNEL_BLK_DEV_BSG
+	bool "Compile the kernel with SCSI generic v4 support for any block device"
+	default n
+
 config KERNEL_MAGIC_SYSRQ
 	bool "Compile the kernel with SysRq support"
 	default y
@@ -184,6 +235,22 @@ config USE_SPARSE
 	bool "Enable sparse check during kernel build"
 	default n
 
+config KERNEL_DEVTMPFS
+	bool "Compile the kernel with device tmpfs enabled"
+	default n
+	help
+	  devtmpfs is a simple, kernel-managed /dev filesystem. The kernel creates
+	  devices nodes for all registered devices ti simplify boot, but leaves more
+	  complex tasks to userspace (e.g. udev).
+
+if KERNEL_DEVTMPFS
+
+	config KERNEL_DEVTMPFS_MOUNT
+		bool "Automatically mount devtmpfs after root filesystem is mounted"
+		default n
+
+endif
+
 #
 # CGROUP support symbols
 #
@@ -220,6 +287,13 @@ if KERNEL_CGROUPS
 		  Provides a cgroup implementing whitelists for devices which
 		  a process in the cgroup can mknod or open.
 
+	config KERNEL_CGROUP_PIDS
+		bool "PIDs cgroup subsystem"
+		default y
+		help
+		  Provides enforcement of process number limits in the scope of a
+		  cgroup.
+
 	config KERNEL_CPUSETS
 		bool "Cpuset support"
 		default n
@@ -255,7 +329,7 @@ if KERNEL_CGROUPS
 	config KERNEL_MEMCG
 		bool "Memory Resource Controller for Control Groups"
 		default n
-		depends on KERNEL_RESOURCE_COUNTERS
+		depends on KERNEL_RESOURCE_COUNTERS || !LINUX_3_18
 		help
 		  Provides a memory resource controller that manages both anonymous
 		  memory and page cache. (See Documentation/cgroups/memory.txt)
@@ -488,22 +562,71 @@ if KERNEL_LXC_MISC
 
 endif
 
+config KERNEL_SECCOMP_FILTER
+	bool
+	default n
+
 config KERNEL_SECCOMP
 	bool "Enable seccomp support"
-		depends on !(TARGET_uml || TARGET_avr32)
+		depends on !(TARGET_uml)
+		select KERNEL_SECCOMP_FILTER
 		default n
 		help
 		  Build kernel with support for seccomp.
 
-config KERNEL_SECCOMP_FILTER
-	bool "Enable seccomp filter support"
-		depends on KERNEL_SECCOMP
-		default n
-		help
-		  Build kernel with support for seccomp BPF programs.
+#
+# IPv6 configuration
+#
 
-config KERNEL_FHANDLE
-	bool "Enable open by fhandle syscalls"
-		default n
-		help
-		  Build kernel with support for open by fhandle syscalls
+config KERNEL_IPV6
+	def_bool IPV6
+
+if KERNEL_IPV6
+
+	config KERNEL_IPV6_MULTIPLE_TABLES
+		def_bool y
+
+	config KERNEL_IPV6_SUBTREES
+		def_bool y
+
+	config KERNEL_IPV6_MROUTE
+		def_bool y
+
+	config KERNEL_IPV6_PIMSM_V2
+		def_bool n
+
+endif
+
+#
+# NFS related symbols
+#
+config KERNEL_IP_PNP
+	bool "Compile the kernel with rootfs on NFS"
+	help
+	   If you want to make your kernel boot off a NFS server as root
+	   filesystem, select Y here.
+
+if KERNEL_IP_PNP
+
+	config KERNEL_IP_PNP_DHCP
+		def_bool y
+
+	config KERNEL_IP_PNP_BOOTP
+		def_bool n
+
+	config KERNEL_IP_PNP_RARP
+		def_bool n
+
+	config KERNEL_NFS_FS
+		def_bool y
+
+	config KERNEL_NFS_V2
+		def_bool y
+
+	config KERNEL_NFS_V3
+		def_bool y
+
+	config KERNEL_ROOT_NFS
+		def_bool y
+
+endif