X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=package%2Fbase-files%2Ffiles%2Flib%2Fnetwork%2Fconfig.sh;h=0a7464495fdf152cbacf126c61441c5c0f359a1f;hb=88041b873e13572b6e71b3bd72d31f956fb27ff7;hp=611da718cd5cc88d4d60be56b3be4c363d408ef3;hpb=31f3c31d147593d0d6c1a2fb8e6adbaeffb71925;p=openwrt%2Fsvn-archive%2Farchive.git

diff --git a/package/base-files/files/lib/network/config.sh b/package/base-files/files/lib/network/config.sh
index 611da718cd..0a7464495f 100755
--- a/package/base-files/files/lib/network/config.sh
+++ b/package/base-files/files/lib/network/config.sh
@@ -40,10 +40,11 @@ scan_interfaces() {
 				append interfaces "$CONFIG_SECTION"
 				config_get iftype "$CONFIG_SECTION" type
 				config_get ifname "$CONFIG_SECTION" ifname
-				config_set "$CONFIG_SECTION" device "$ifname"
+				config_get device "$CONFIG_SECTION" device
+				config_set "$CONFIG_SECTION" device "${device:-$ifname}"
 				case "$iftype" in
 					bridge)
-						config_set "$CONFIG_SECTION" ifnames "$ifname"
+						config_set "$CONFIG_SECTION" ifnames "${device:-$ifname}"
 						config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
 					;;
 				esac
@@ -60,7 +61,19 @@ add_vlan() {
 	[ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
 		ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
 		$DEBUG vconfig add "$vif" "${1##*\.}"
+		return 0
 	}
+	return 1
+}
+
+# sort the device list, drop duplicates
+sort_list() {
+	local arg="$*"
+	(
+		for item in $arg; do
+			echo "$item"
+		done
+	) | sort -u
 }
 
 # Create the interface, if necessary.
@@ -83,7 +96,7 @@ prepare_interface() {
 	}
 
 	# Setup VLAN interfaces
-	add_vlan "$iface"
+	add_vlan "$iface" && return 1
 	ifconfig "$iface" 2>/dev/null >/dev/null || return 0
 
 	# Setup bridging
@@ -93,6 +106,13 @@ prepare_interface() {
 		bridge)
 			[ -x /usr/sbin/brctl ] && {
 				ifconfig "br-$config" 2>/dev/null >/dev/null && {
+					local newdevs=
+
+					config_get devices "$config" device
+					for dev in $(sort_list "$devices" "$iface"); do
+						append newdevs "$dev"
+					done
+					uci_set_state network "$config" device "$newdevs"
 					$DEBUG brctl addif "br-$config" "$iface"
 					# Bridge existed already. No further processing necesary
 				} || {
@@ -113,6 +133,15 @@ prepare_interface() {
 	return 0
 }
 
+set_interface_ifname() {
+	local config="$1"
+	local ifname="$2"
+
+	config_get device "$1" device
+	uci_set_state network "$config" ifname "$ifname"
+	uci_set_state network "$config" device "$device"
+}
+
 setup_interface() {
 	local iface="$1"
 	local config="$2"
@@ -140,7 +169,7 @@ setup_interface() {
 	config_get macaddr "$config" macaddr
 	grep "$iface:" /proc/net/dev > /dev/null && \
 		$DEBUG ifconfig "$iface" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} up
-	uci_set_state network "$config" ifname "$iface"
+	set_interface_ifname "$config" "$iface"
 
 	pidfile="/var/run/$iface.pid"
 	case "$proto" in
@@ -157,8 +186,8 @@ setup_interface() {
 			
 			[ -z "$ipaddr" ] || $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask" broadcast "${bcast:-+}"
 			[ -z "$ip6addr" ] || $DEBUG ifconfig "$iface" add "$ip6addr"
-			[ -z "$gateway" ] || $DEBUG route add default gw "$gateway"
-			[ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw"
+			[ -z "$gateway" ] || $DEBUG route add default gw "$gateway" dev "$iface"
+			[ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw" dev "$iface"
 			[ -z "$dns" ] || {
 				for ns in $dns; do
 					grep "$ns" /tmp/resolv.conf.auto 2>/dev/null >/dev/null || {