X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Ffiles%2Farch%2Fmips%2Fath79%2Fmach-dir-825-b1.c;fp=target%2Flinux%2Far71xx%2Ffiles%2Farch%2Fmips%2Fath79%2Fmach-dir-825-b1.c;h=ab973ebfb838450ff4fefaa649899df0fdb62a46;hb=d72bde99cd03721fd5b04a1b365bd3f30d4277d9;hp=0000000000000000000000000000000000000000;hpb=81b7aaefbe060d752ed49d41aef11f2184f699ce;p=openwrt%2Fstaging%2Fchunkeey.git diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c new file mode 100644 index 0000000000..ab973ebfb8 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c @@ -0,0 +1,208 @@ +/* + * D-Link DIR-825 rev. B1 board support + * + * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o. + * + * based on mach-wndr3700.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#include "dev-eth.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define DIR825B1_GPIO_LED_BLUE_USB 0 +#define DIR825B1_GPIO_LED_ORANGE_POWER 1 +#define DIR825B1_GPIO_LED_BLUE_POWER 2 +#define DIR825B1_GPIO_LED_BLUE_WPS 4 +#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 +#define DIR825B1_GPIO_LED_BLUE_PLANET 11 + +#define DIR825B1_GPIO_BTN_RESET 3 +#define DIR825B1_GPIO_BTN_WPS 8 + +#define DIR825B1_GPIO_RTL8366_SDA 5 +#define DIR825B1_GPIO_RTL8366_SCK 7 + +#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL) + +#define DIR825B1_CAL_LOCATION_0 0x1f661000 +#define DIR825B1_CAL_LOCATION_1 0x1f665000 + +#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0 +#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4 + +static struct mtd_partition dir825b1_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x610000, + }, { + .name = "caldata", + .offset = 0x660000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "unknown", + .offset = 0x670000, + .size = 0x190000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct flash_platform_data dir825b1_flash_data = { + .parts = dir825b1_partitions, + .nr_parts = ARRAY_SIZE(dir825b1_partitions), +}; + +static struct gpio_led dir825b1_leds_gpio[] __initdata = { + { + .name = "d-link:blue:usb", + .gpio = DIR825B1_GPIO_LED_BLUE_USB, + .active_low = 1, + }, { + .name = "d-link:orange:power", + .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, + .active_low = 1, + }, { + .name = "d-link:blue:power", + .gpio = DIR825B1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DIR825B1_GPIO_LED_BLUE_WPS, + .active_low = 1, + }, { + .name = "d-link:orange:planet", + .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, + .active_low = 1, + }, { + .name = "d-link:blue:planet", + .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825B1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825B1_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = { + { .reg = 0x06, .val = 0x0108 }, +}; + +static struct rtl8366_platform_data dir825b1_rtl8366s_data = { + .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, + .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, + .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals), + .initvals = dir825b1_rtl8366s_initvals, +}; + +static struct platform_device dir825b1_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &dir825b1_rtl8366s_data, + } +}; + +static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr) +{ + int ret; + u8 *src = (u8 *)KSEG1ADDR(src_addr); + + ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &dest[0], &dest[1], &dest[2], + &dest[3], &dest[4], &dest[5]); + + if (ret != ETH_ALEN) + memset(dest, 0, ETH_ALEN); +} + +static void __init dir825b1_setup(void) +{ + u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; + + dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0); + dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2); + ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_pll_data.pll_1000 = 0x11110000; + + ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3); + ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = 0x10; + ath79_eth1_pll_data.pll_1000 = 0x11110000; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&dir825b1_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), + dir825b1_leds_gpio); + + ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir825b1_gpio_keys), + dir825b1_gpio_keys); + + ath79_register_usb(); + + platform_device_register(&dir825b1_rtl8366s_device); + + ap9x_pci_setup_wmac_led_pin(0, 5); + ap9x_pci_setup_wmac_led_pin(1, 5); + + ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1, + (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2); +} + +MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", + dir825b1_setup);