X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Ffiles%2Farch%2Fmips%2Fath79%2Fmach-smart-300.c;fp=target%2Flinux%2Far71xx%2Ffiles%2Farch%2Fmips%2Fath79%2Fmach-smart-300.c;h=0000000000000000000000000000000000000000;hb=4e4ee4649553ab536225060a27fc320bf54e458c;hp=2520e960d396bc2ffe112e5b74ce8663ab7099ae;hpb=47b2ee2d9a9a1790f9bf8a528640c333af39e4ba;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
deleted file mode 100644
index 2520e960d3..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- *  NC-LINK SMART-300 board support
- *
- *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ag71xx_platform.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define SMART_300_GPIO_LED_WLAN		13
-#define SMART_300_GPIO_LED_WAN		18
-#define SMART_300_GPIO_LED_LAN4		19
-#define SMART_300_GPIO_LED_LAN3		12
-#define SMART_300_GPIO_LED_LAN2		21
-#define SMART_300_GPIO_LED_LAN1		20
-#define SMART_300_GPIO_LED_SYSTEM	15
-#define SMART_300_GPIO_LED_POWER	14
-
-#define SMART_300_GPIO_BTN_RESET	17
-#define SMART_300_GPIO_SW_RFKILL	16
-
-#define SMART_300_KEYS_POLL_INTERVAL	20	/* msecs */
-#define SMART_300_KEYS_DEBOUNCE_INTERVAL (3 * SMART_300_KEYS_POLL_INTERVAL)
-
-#define SMART_300_GPIO_MASK        0x007fffff
-
-static const char *smart_300_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data smart_300_flash_data = {
-	.part_probes	= smart_300_part_probes,
-};
-
-static struct gpio_led smart_300_leds_gpio[] __initdata = {
-	{
-		.name		= "nc-link:green:lan1",
-		.gpio		= SMART_300_GPIO_LED_LAN1,
-		.active_low	= 1,
-	}, {
-		.name		= "nc-link:green:lan2",
-		.gpio		= SMART_300_GPIO_LED_LAN2,
-		.active_low	= 1,
-	}, {
-		.name		= "nc-link:green:lan3",
-		.gpio		= SMART_300_GPIO_LED_LAN3,
-		.active_low	= 1,
-	}, {
-		.name		= "nc-link:green:lan4",
-		.gpio		= SMART_300_GPIO_LED_LAN4,
-		.active_low	= 1,
-	}, {
-		.name		= "nc-link:green:system",
-		.gpio		= SMART_300_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "nc-link:green:wan",
-		.gpio		= SMART_300_GPIO_LED_WAN,
-		.active_low	= 1,
-	}, {
-		.name		= "nc-link:green:wlan",
-		.gpio		= SMART_300_GPIO_LED_WLAN,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button smart_300_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = SMART_300_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= SMART_300_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-static void __init smart_300_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(smart_300_leds_gpio),
-				 smart_300_leds_gpio);
-
-	ath79_register_gpio_keys_polled(1, SMART_300_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(smart_300_gpio_keys),
-					smart_300_gpio_keys);
-
-	ath79_register_m25p80(&smart_300_flash_data);
-
-	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
-	ath79_register_mdio(1, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
-	/* GMAC0 is connected to the PHY0 of the internal switch */
-	ath79_switch_data.phy4_mii_en = 1;
-	ath79_switch_data.phy_poll_mask = BIT(4);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = BIT(4);
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-	ath79_register_eth(0);
-
-	/* GMAC1 is connected to the internal switch */
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-	ath79_register_eth(1);
-
-	ath79_register_wmac(ee, mac);
-
-	gpio_request(SMART_300_GPIO_LED_POWER, "power");
-	gpio_direction_output(SMART_300_GPIO_LED_POWER, GPIOF_OUT_INIT_LOW);
-}
-
-MIPS_MACHINE(ATH79_MACH_SMART_300, "SMART-300", "NC-LINK SMART-300",
-	     smart_300_setup);