X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=99b9d421f4f0a04a429e6bc8c7c017bb104f7033;hb=2758dd332cfb853a723913aca25a9003026da908;hp=a2cd0ac3a6bba546caef9810df6a090b4c47fc52;hpb=3d153323ab4f6336a8fab771e6eefe9f61ecbfac;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index a2cd0ac3a6..99b9d421f4 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -9,11 +9,15 @@ ath79_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
+	adtran,bsap1800-v2|\
+	adtran,bsap1840|\
+	alfa-network,ap121f|\
 	aruba,ap-105|\
 	avm,fritz300e|\
 	devolo,dvl1200i|\
 	devolo,dvl1750c|\
 	devolo,dvl1750i|\
+	devolo,dvl1750x|\
 	engenius,ecb1750|\
 	glinet,ar300m-lite|\
 	netgear,ex6400|\
@@ -21,11 +25,17 @@ ath79_setup_interfaces()
 	ocedo,koala|\
 	ocedo,raccoon|\
 	pcs,cap324|\
+	pisen,wmb001n|\
 	pisen,wmm003n|\
 	pqi,air-pen|\
 	tplink,cpe210-v2|\
 	tplink,cpe210-v3|\
+	tplink,cpe510-v2|\
+	tplink,cpe510-v3|\
+	tplink,cpe610-v1|\
 	tplink,re350k-v1|\
+	tplink,re355-v1|\
+	tplink,re450-v1|\
 	tplink,re450-v2|\
 	tplink,tl-mr10u|\
 	tplink,tl-mr3020-v1|\
@@ -58,7 +68,8 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
 		;;
-	buffalo,bhr-4grv2)
+	buffalo,bhr-4grv2|\
+	trendnet,tew-823dru)
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
 		;;
@@ -68,13 +79,19 @@ ath79_setup_interfaces()
 			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
 	buffalo,wzr-hp-ag300h|\
+	tplink,archer-c25-v1|\
 	tplink,tl-mr3220-v1|\
 	tplink,tl-mr3420-v1|\
 	tplink,tl-wr841-v7|\
 	tplink,tl-wr841-v9|\
+	tplink,tl-wr841-v10|\
 	tplink,tl-wr841-v11|\
+	tplink,tl-wr841-v12|\
 	tplink,tl-wr842n-v1|\
 	tplink,tl-wr842n-v3|\
+	tplink,tl-wr940n-v3|\
+	tplink,tl-wr940n-v4|\
+	tplink,tl-wr941nd-v6|\
 	ubnt,airrouter)
 		ucidef_set_interface_wan "eth1"
 		ucidef_add_switch "switch0" \
@@ -86,10 +103,20 @@ ath79_setup_interfaces()
 		;;
 	comfast,cf-e110n-v2|\
 	comfast,cf-e120a-v3|\
+	comfast,cf-e314n-v2|\
+	tplink,cpe210-v1|\
+	tplink,cpe220-v2|\
+	tplink,cpe510-v1|\
 	ubnt,nanostation-m|\
 	ubnt,routerstation)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
+	comfast,cf-wr650ac-v1|\
+	comfast,cf-wr650ac-v2)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
+		;;
 	devolo,dvl1200e|\
 	devolo,dvl1750e|\
 	ocedo,ursus)
@@ -102,6 +129,9 @@ ath79_setup_interfaces()
 		;;
 	dlink,dir-825-c1|\
 	dlink,dir-835-a1|\
+	dlink,dir-842-c1|\
+	dlink,dir-842-c2|\
+	dlink,dir-842-c3|\
 	dlink,dir-859-a1|\
 	engenius,epg5000|\
 	tplink,archer-c2-v3|\
@@ -181,6 +211,11 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
 		;;
+	qihoo,c301)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan" "3:lan"
+		;;
 	rosinson,wr818)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan" "2:lan" "3:wan"
@@ -189,8 +224,8 @@ ath79_setup_interfaces()
 	tplink,archer-c6-v2|\
 	tplink,archer-c7-v4|\
 	tplink,archer-c7-v5|\
-	tplink,tl-wdr3600|\
-	tplink,tl-wdr4300|\
+	tplink,tl-wdr3600-v1|\
+	tplink,tl-wdr4300-v1|\
 	tplink,tl-wr941n-v7-cn)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
@@ -202,6 +237,12 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
 		;;
+	tplink,archer-c60-v1|\
+	tplink,archer-c60-v2)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+		;;
 	tplink,archer-d50-v1)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
@@ -261,6 +302,11 @@ ath79_setup_macs()
 	local board="$1"
 
 	case "$board" in
+	adtran,bsap1800-v2|\
+	adtran,bsap1840)
+		fconfig -s -w -d $(find_mtd_part "RedBoot config") -n boot_cntb -x 0
+		lan_mac=$(mtd_get_mac_binary "Board data" 2)
+		;;
 	avm,fritz300e)
 		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
 		;;
@@ -277,6 +323,9 @@ ath79_setup_macs()
 		lan_mac=$(mtd_get_mac_text "mac" 4)
 		wan_mac=$(mtd_get_mac_text "mac" 24)
 		;;
+	dlink,dir-842-c1|\
+	dlink,dir-842-c2|\
+	dlink,dir-842-c3|\
 	dlink,dir-859-a1|\
 	nec,wg1200cr|\
 	wd,mynet-n750)
@@ -285,7 +334,7 @@ ath79_setup_macs()
 		;;
 	elecom,wrc-1750ghbk2-i|\
 	elecom,wrc-300ghbk2-i)
-		wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 4098)" -2)
 		;;
 	engenius,ecb1750)
 		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
@@ -325,6 +374,10 @@ ath79_setup_macs()
 		lan_mac=$(k2t_get_mac "lan_mac")
 		wan_mac=$(k2t_get_mac "wan_mac")
 		;;
+	qihoo,c301)
+		lan_mac=$(mtd_get_mac_ascii devdata lanmac)
+		wan_mac=$(mtd_get_mac_ascii devdata wanmac)
+		;;
 	rosinson,wr818)
 		wan_mac=$(mtd_get_mac_binary factory 0)
 		lan_mac=$(macaddr_setbit_la "$wan_mac")
@@ -342,6 +395,10 @@ ath79_setup_macs()
 		base_mac=$(mtd_get_mac_binary u-boot 130048)
 		wan_mac=$(macaddr_add "$base_mac" 1)
 		;;
+	trendnet,tew-823dru)
+		lan_mac=$(mtd_get_mac_text mac 4)
+		wan_mac=$(mtd_get_mac_text mac 24)
+		;;
 	ubnt,routerstation|\
 	ubnt,routerstation-pro)
 		wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)