X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Far9344_tplink_tl-wdr4300.dtsi;h=f6e4856ec5ef1739a363970dec0b2ea73f473c3d;hb=9bdd3d39ad9af8f8fb55c7b68c7267f990ff2b7c;hp=d2c88fc935c64ac2726bdd03830cd67802bc07f7;hpb=55ff2951eac8fd86c91b9673395325e393e357ac;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
index d2c88fc935..f6e4856ec5 100644
--- a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
@@ -6,11 +6,11 @@
 #include "ar9344.dtsi"
 
 / {
-	model = "TP-Link WDR4300";
-	compatible = "tplink,tl-wdr4300";
-
 	aliases {
-		led-status = &system;
+		led-boot = &system;
+		led-failsafe = &system;
+		led-running = &system;
+		led-upgrade = &system;
 	};
 
 	leds {
@@ -19,7 +19,6 @@
 		usb1 {
 			label = "tp-link:green:usb1";
 			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			trigger-sources = <&hub_port1>;
 			linux,default-trigger = "usbport";
 		};
@@ -27,7 +26,6 @@
 		usb2 {
 			label = "tp-link:green:usb2";
 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			trigger-sources = <&hub_port2>;
 			linux,default-trigger = "usbport";
 		};
@@ -35,7 +33,6 @@
 		wlan2g {
 			label = "tp-link:green:wlan2g";
 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			linux,default-trigger = "phy0tpt";
 		};
 
@@ -48,7 +45,6 @@
 		qss {
 			label = "tp-link:green:qss";
 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 	};
 
@@ -58,7 +54,6 @@
 		wlan5g {
 			label = "tp-link:green:wlan5g";
 			gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			linux,default-trigger = "phy1tpt";
 		};
 	};
@@ -144,6 +139,7 @@
 			};
 
 			partition@20000 {
+				compatible = "tplink,firmware";
 				label = "firmware";
 				reg = <0x020000 0x7d0000>;
 			};
@@ -233,7 +229,6 @@
 	pll-data = <0x06000000 0x00000101 0x00001616>;
 
 	mtd-mac-address = <&uboot 0x1fc00>;
-	mtd-mac-address-increment = <(-2)>;
 
 	phy-mode = "rgmii";
 	phy-handle = <&phy0>;