X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Fqca9563_tplink_tl-wr1043n.dtsi;h=b8f48047e2d82663c96f8f8138180df46022a4c9;hb=fe2f53f21c4f52febd8070588791c16c349e0fd8;hp=056fe4eccc5b188a4246aa28fab4528298a37b32;hpb=55ff2951eac8fd86c91b9673395325e393e357ac;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
index 056fe4eccc..b8f48047e2 100644
--- a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
@@ -1,76 +1,67 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "qca956x.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca956x.dtsi"
-
 / {
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
 	aliases {
-		led-status = &system;
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+		label-mac-device = &wmac;
 	};
 
-	gpio_leds: leds {
+	leds: leds {
 		compatible = "gpio-leds";
 
-		system: system {
-			label = "tp-link:green:system";
+		led_system: system {
+			label = "green:system";
 			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		wifi_green {
-			label = "tp-link:green:wlan";
+			label = "green:wlan";
 			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wifi_wps {
-			label = "tp-link:green:wps";
+			label = "green:wps";
 			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 
 		wan {
-			label = "tp-link:green:wan";
+			label = "green:wan";
 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 
 		wan_fail {
-			label = "tp-link:orange:wan";
+			label = "orange:wan";
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 
 		lan1 {
-			label = "tp-link:green:lan1";
+			label = "green:lan1";
 			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 
 		lan2 {
-			label = "tp-link:green:lan2";
+			label = "green:lan2";
 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 
 		lan3 {
-			label = "tp-link:green:lan3";
+			label = "green:lan3";
 			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 
 		lan4 {
-			label = "tp-link:green:lan4";
+			label = "green:lan4";
 			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 	};
 
@@ -91,85 +82,12 @@
 			debounce-interval = <60>;
 		};
 	};
-
-	gpio-export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		gpio_usb_power {
-			gpio-export,name = "tp-link:power:usb";
-			gpio-export,output = <1>;
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &uart {
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
-&spi {
-	status = "okay";
-	num-cs = <1>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x000000 0x020000>;
-				read-only;
-			};
-
-			partition@20000 {
-				label = "firmware";
-				reg = <0x020000 0xf30000>;
-			};
-
-			info: partition@f50000 {
-				label = "product-info";
-				reg = <0xf50000 0x020000>;
-				read-only;
-			};
-
-			partition@f70000 {
-				label = "config";
-				reg = <0xf70000 0x050000>;
-				read-only;
-			};
-
-			partition@fc0000 {
-				label = "partition-table";
-				reg = <0xfc0000 0x010000>;
-				read-only;
-			};
-
-			partition@fd0000 {
-				label = "logs";
-				reg = <0xfd0000 0x020000>;
-				read-only;
-			};
-
-			art: partition@ff0000 {
-				label = "ART";
-				reg = <0xff0000 0x010000>;
-				read-only;
-			};
-		};
-	};
-};
-
 &mdio0 {
 	status = "okay";
 
@@ -177,6 +95,7 @@
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";
+		qca,mib-poll-interval = <500>;
 
 		qca,ar8327-initvals = <
 			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
@@ -195,6 +114,7 @@
 
 &wmac {
 	status = "okay";
+
 	mtd-cal-data = <&art 0x1000>;
 	mtd-mac-address = <&info 0x8>;
 };