X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fgeneric%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F11-ath10k-caldata;h=f522268e59c07725ce7e6e601f4ca3830243eb0b;hb=e1dcaeb55c939365cdd27e469b63fca295bf1a2e;hp=c0e5078bdb2e0c1d2d79985244398be7b9501abf;hpb=97f561725962ddb8823b2e01563a0f37f7930477;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c0e5078bdb..f522268e59 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -11,16 +11,15 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
 	case $board in
 	allnet,all-wap02860ac|\
+	araknis,an-500-ap-i-ac|\
+	araknis,an-700-ap-i-ac|\
 	engenius,eap1200h|\
 	engenius,enstationac-v1|\
 	glinet,gl-x750)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
 		;;
-	avm,fritz1750e|\
-	avm,fritzdvbc)
-		caldata_extract "urlader" 0x198a 0x844
-		;;
+	asus,pl-ac56|\
 	asus,rp-ac66|\
 	comfast,cf-wr650ac-v1|\
 	comfast,cf-wr650ac-v2|\
@@ -31,6 +30,10 @@ case "$FIRMWARE" in
 	qxwlan,e1700ac-v2-16m|\
 	qxwlan,e600gac-v2-8m|\
 	qxwlan,e600gac-v2-16m|\
+	sophos,ap55|\
+	sophos,ap55c|\
+	sophos,ap100|\
+	sophos,ap100c|\
 	ubnt,aircube-ac|\
 	ubnt,bullet-ac|\
 	ubnt,unifiac-lite|\
@@ -41,15 +44,21 @@ case "$FIRMWARE" in
 	ubnt,litebeam-ac-gen2|\
 	ubnt,nanobeam-ac|\
 	ubnt,nanobeam-ac-gen2|\
+	ubnt,nanobeam-ac-xc|\
 	ubnt,nanostation-ac|\
 	ubnt,nanostation-ac-loco|\
 	ubnt,powerbeam-5ac-500|\
 	ubnt,powerbeam-5ac-gen2|\
 	ubnt,rocket-5ac-lite|\
 	ubnt,unifiac-pro|\
-	yuncore,a770)
+	yuncore,a770|\
+	yuncore,xd3200)
 		caldata_extract "art" 0x5000 0x844
 		;;
+	avm,fritz1750e|\
+	avm,fritzdvbc)
+		caldata_extract "urlader" 0x198a 0x844
+		;;
 	devolo,dvl1200e|\
 	devolo,dvl1200i|\
 	devolo,dvl1750c|\
@@ -59,12 +68,6 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
 		;;
-	dlink,dap-2660-a1|\
-	dlink,dap-2695-a1|\
-	dlink,dap-3662-a1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
-		;;
 	dlink,dir-859-a1)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
@@ -105,12 +108,9 @@ case "$FIRMWARE" in
 	openmesh,a40|\
 	openmesh,a60|\
 	openmesh,mr1750-v1|\
-	openmesh,mr1750-v2)
-		caldata_extract "ART" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 16)
-		;;
+	openmesh,mr1750-v2|\
 	openmesh,om5p-ac-v2)
-		caldata_extract "art" 0x5000 0x844
+		caldata_extract "ART" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 16)
 		;;
 	qihoo,c301)
@@ -140,14 +140,6 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) 2)
 		;;
-	tplink,eap225-v1|\
-	tplink,eap245-v1|\
-	tplink,re450-v2|\
-	tplink,re450-v3|\
-	tplink,re455-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
-		;;
 	tplink,re350k-v1)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 2)
@@ -157,6 +149,12 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
+	tplink,re450-v2|\
+	tplink,re450-v3|\
+	tplink,re455-v1)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+		;;
 	tplink,tl-wpa8630-v1)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) 1)
@@ -194,12 +192,6 @@ case "$FIRMWARE" in
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
 		;;
-	dlink,dap-2680-a1)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
 	dlink,dir-842-c1|\
 	dlink,dir-842-c2|\
 	dlink,dir-842-c3)
@@ -247,25 +239,16 @@ case "$FIRMWARE" in
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
-	tplink,eap225-outdoor-v1|\
-	tplink,eap225-v3|\
-	tplink,eap225-wall-v2|\
-	tplink,tl-wpa8630p-v2-int|\
-	tplink,tl-wpa8630p-v2.0-eu|\
-	tplink,tl-wpa8630p-v2.1-eu)
+	xiaomi,aiot-ac2350)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	tplink,eap245-v3)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+			/lib/firmware/ath10k/QCA9984/hw1.0/board.bin
 		;;
-	xiaomi,aiot-ac2350)
+	tplink,deco-m4r-v1)
 		caldata_extract "art" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x8) -1)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9984/hw1.0/board.bin
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
 	yuncore,a782|\
 	yuncore,xd4200)