X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fpatches-6.6%2F911-mikrotik-rb91x.patch;fp=target%2Flinux%2Fath79%2Fpatches-6.6%2F911-mikrotik-rb91x.patch;h=e610a4ff14837c94bda09f9b881b5172691cde3f;hb=872fe7e9f9fbf857963728bd267ef982143cddde;hp=677428fa65c1e8c0ac6a5c4da1a5b965f6a8c44c;hpb=d123330aa93a2d09f7dff039a2351d947d4fd8f7;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ath79/patches-6.6/911-mikrotik-rb91x.patch b/target/linux/ath79/patches-6.6/911-mikrotik-rb91x.patch
index 677428fa65..e610a4ff14 100644
--- a/target/linux/ath79/patches-6.6/911-mikrotik-rb91x.patch
+++ b/target/linux/ath79/patches-6.6/911-mikrotik-rb91x.patch
@@ -29,7 +29,7 @@ Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
 
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -368,6 +368,12 @@ config GPIO_IXP4XX
+@@ -371,6 +371,12 @@ config GPIO_IXP4XX
  
  	  If unsure, say N.
  
@@ -42,7 +42,7 @@ Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
  config GPIO_LOGICVC
  	tristate "Xylon LogiCVC GPIO support"
  	depends on MFD_SYSCON && OF
-@@ -544,6 +550,10 @@ config GPIO_ROCKCHIP
+@@ -553,6 +559,10 @@ config GPIO_ROCKCHIP
  	help
  	  Say yes here to support GPIO on Rockchip SoCs.
  
@@ -55,15 +55,15 @@ Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
  	depends on MFD_SYSCON
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
-@@ -76,6 +76,7 @@ obj-$(CONFIG_GPIO_IT87)			+= gpio-it87.o
- obj-$(CONFIG_GPIO_IXP4XX)		+= gpio-ixp4xx.o
+@@ -81,6 +81,7 @@ obj-$(CONFIG_GPIO_IXP4XX)		+= gpio-ixp4x
  obj-$(CONFIG_GPIO_JANZ_TTL)		+= gpio-janz-ttl.o
  obj-$(CONFIG_GPIO_KEMPLD)		+= gpio-kempld.o
+ obj-$(CONFIG_GPIO_LATCH)		+= gpio-latch.o
 +obj-$(CONFIG_GPIO_LATCH_MIKROTIK)	+= gpio-latch-mikrotik.o
+ obj-$(CONFIG_GPIO_LJCA) 		+= gpio-ljca.o
  obj-$(CONFIG_GPIO_LOGICVC)		+= gpio-logicvc.o
  obj-$(CONFIG_GPIO_LOONGSON1)		+= gpio-loongson1.o
- obj-$(CONFIG_GPIO_LOONGSON)		+= gpio-loongson.o
-@@ -124,6 +125,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)	+= gpio
+@@ -132,6 +133,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)	+= gpio
  obj-$(CONFIG_GPIO_PXA)			+= gpio-pxa.o
  obj-$(CONFIG_GPIO_RASPBERRYPI_EXP)	+= gpio-raspberrypi-exp.o
  obj-$(CONFIG_GPIO_RB4XX)		+= gpio-rb4xx.o
@@ -73,7 +73,7 @@ Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
  obj-$(CONFIG_GPIO_RDA)			+= gpio-rda.o
 --- a/drivers/mtd/nand/raw/Kconfig
 +++ b/drivers/mtd/nand/raw/Kconfig
-@@ -572,4 +572,10 @@ config MTD_NAND_RB4XX
+@@ -558,4 +558,10 @@ config MTD_NAND_RB4XX
  	  Enables support for the NAND flash chip on Mikrotik Routerboard
  	  RB4xx series.
  
@@ -86,7 +86,7 @@ Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
  endif # MTD_RAW_NAND
 --- a/drivers/mtd/nand/raw/Makefile
 +++ b/drivers/mtd/nand/raw/Makefile
-@@ -61,6 +61,7 @@ obj-$(CONFIG_MTD_NAND_PL35X)		+= pl35x-n
+@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_PL35X)		+= pl35x-n
  obj-$(CONFIG_MTD_NAND_RENESAS)		+= renesas-nand-controller.o
  obj-$(CONFIG_MTD_NAND_AR934X)		+= ar934x_nand.o
  obj-$(CONFIG_MTD_NAND_RB4XX)		+= nand_rb4xx.o