X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0107-ARM-bcm2835-Set-Serial-number-and-Revision.patch;fp=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0107-ARM-bcm2835-Set-Serial-number-and-Revision.patch;h=0000000000000000000000000000000000000000;hb=67dcc43f3a22dc3a7ac07a7065971b426feeb043;hp=2ea61494ccf61cb31b74f87c4c59796f9b93dbae;hpb=47a93a810f78adce5a130d287f82b28e9b54313c;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/brcm2708/patches-4.19/950-0107-ARM-bcm2835-Set-Serial-number-and-Revision.patch b/target/linux/brcm2708/patches-4.19/950-0107-ARM-bcm2835-Set-Serial-number-and-Revision.patch
deleted file mode 100644
index 2ea61494cc..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0107-ARM-bcm2835-Set-Serial-number-and-Revision.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 6eb5a426229447a1045507fb63afdb11ddc5eda4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Wed, 3 Jun 2015 12:26:13 +0200
-Subject: [PATCH 107/806] ARM: bcm2835: Set Serial number and Revision
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The VideoCore bootloader passes in Serial number and
-Revision number through Device Tree. Make these available to
-userspace through /proc/cpuinfo.
-
-Mainline status:
-
-There is a commit in linux-next that standardize passing the serial
-number through Device Tree (string: /serial-number):
-ARM: 8355/1: arch: Show the serial number from devicetree in cpuinfo
-
-There was an attempt to do the same with the revision number, but it
-didn't get in:
-[PATCH v2 1/2] arm: devtree: Set system_rev from DT revision
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- arch/arm/mach-bcm/board_bcm2835.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm/mach-bcm/board_bcm2835.c
-+++ b/arch/arm/mach-bcm/board_bcm2835.c
-@@ -15,12 +15,25 @@
- #include <linux/init.h>
- #include <linux/irqchip.h>
- #include <linux/of_address.h>
-+#include <asm/system_info.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- 
- #include "platsmp.h"
- 
-+static void __init bcm2835_init(void)
-+{
-+	struct device_node *np = of_find_node_by_path("/system");
-+	u32 val;
-+	u64 val64;
-+
-+	if (!of_property_read_u32(np, "linux,revision", &val))
-+		system_rev = val;
-+	if (!of_property_read_u64(np, "linux,serial", &val64))
-+		system_serial_low = val64;
-+}
-+
- static const char * const bcm2835_compat[] = {
- #ifdef CONFIG_ARCH_MULTI_V6
- 	"brcm,bcm2835",
-@@ -33,6 +46,7 @@ static const char * const bcm2835_compat
- };
- 
- DT_MACHINE_START(BCM2835, "BCM2835")
-+	.init_machine = bcm2835_init,
- 	.dt_compat = bcm2835_compat,
- 	.smp = smp_ops(bcm2836_smp_ops),
- MACHINE_END