X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0253-overlays-Update-README-with-removal-of-lirc-rpi.patch;fp=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0253-overlays-Update-README-with-removal-of-lirc-rpi.patch;h=0000000000000000000000000000000000000000;hb=84d555aa74434392b682fd9eb0fa701c89a046d6;hp=02162129b4855da0c0b222f3ff694e7de2f4c4b3;hpb=953973c2991e8640549a55df7a0574a1abac8644;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/brcm2708/patches-4.19/950-0253-overlays-Update-README-with-removal-of-lirc-rpi.patch b/target/linux/brcm2708/patches-4.19/950-0253-overlays-Update-README-with-removal-of-lirc-rpi.patch
deleted file mode 100644
index 02162129b4..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0253-overlays-Update-README-with-removal-of-lirc-rpi.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From f2c24ce7e03d059fa9f674d8ebf6286e8f0c38b6 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 5 Dec 2018 11:56:40 +0000
-Subject: [PATCH] overlays: Update README with removal of lirc-rpi
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/README | 57 ++++++++++++-------------------
- 1 file changed, 21 insertions(+), 36 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -56,23 +56,29 @@ have its contents deleted (or commented
- Using Overlays
- ==============
- 
--Overlays are loaded using the "dtoverlay" directive. As an example, consider
--the popular lirc-rpi module, the Linux Infrared Remote Control driver. In the
--pre-DT world this would be loaded from /etc/modules, with an explicit
--"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled,
--this becomes a line in config.txt:
--
--    dtoverlay=lirc-rpi
--
--This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By
--default it will use GPIOs 17 (out) and 18 (in), but this can be modified using
--DT parameters:
--
--    dtoverlay=lirc-rpi,gpio_out_pin=17,gpio_in_pin=13
--
--Parameters always have default values, although in some cases (e.g. "w1-gpio")
--it is necessary to provided multiple overlays in order to get the desired
--behaviour. See the list of overlays below for a description of the parameters
-+Overlays are loaded using the "dtoverlay" config.txt setting. As an example,
-+consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded
-+by writing a magic string comprising a device identifier and an I2C address to
-+a special file in /sys/class/i2c-adapter, having first loaded the driver for
-+the I2C interface and the RTC device - something like this:
-+
-+    modprobe i2c-bcm2835
-+    modprobe rtc-ds1307
-+    echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device
-+
-+With DT enabled, this becomes a line in config.txt:
-+
-+    dtoverlay=i2c-rtc,ds1307
-+
-+This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node"
-+describing the DS1307 I2C device to be added to the Device Tree for the Pi. By
-+default it usees address 0x68, but this can be modified with an additional DT
-+parameter:
-+
-+    dtoverlay=i2c-rtc,ds1307,addr=0x68
-+
-+Parameters usually have default values, although certain parameters are
-+mandatory. See the list of overlays below for a description of the parameters
- and their defaults.
- 
- The Overlay and Parameter Reference
-@@ -1135,29 +1141,8 @@ Params: <None>
- 
- 
- Name:   lirc-rpi
--Info:   Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi)
--        Consult the module documentation for more details.
--Load:   dtoverlay=lirc-rpi,<param>=<val>
--Params: gpio_out_pin            GPIO for output (default "17")
--
--        gpio_in_pin             GPIO for input (default "18")
--
--        gpio_in_pull            Pull up/down/off on the input pin
--                                (default "down")
--
--        sense                   Override the IR receive auto-detection logic:
--                                 "0" = force active-high
--                                 "1" = force active-low
--                                 "-1" = use auto-detection
--                                (default "-1")
--
--        softcarrier             Turn the software carrier "on" or "off"
--                                (default "on")
--
--        invert                  "on" = invert the output pin (default "off")
--
--        debug                   "on" = enable additional debug messages
--                                (default "off")
-+Info:   This overlay has been deprecated and removed - see gpio-ir
-+Load:   <Deprecated>
- 
- 
- Name:   ltc294x