X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch;fp=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch;h=0000000000000000000000000000000000000000;hb=c2308a7e4adbb2acc8ff149f91d1ca46801c135e;hp=4dc414119b10a73de6df39dacd614edd007feafd;hpb=67dcc43f3a22dc3a7ac07a7065971b426feeb043;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/brcm2708/patches-4.19/950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch b/target/linux/brcm2708/patches-4.19/950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch
deleted file mode 100644
index 4dc414119b..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 6cafe647492605d21c2418b6261bf3182b9229f2 Mon Sep 17 00:00:00 2001
-From: Zahari Petkov <zahari@balena.io>
-Date: Fri, 8 Feb 2019 13:03:38 +0200
-Subject: [PATCH] overlays: balenaFin v1.1.0 carrier board update
-
-A backward compatible update for the balenaFin carrier board for the
-Raspberry Pi Compute Module 3/3+ Lite.
-
-The updated overlay includes:
-  * support for the newly introduced RGB LEDs
-  * i2c-gpio and SDIO improvements
-  * DT based Marvell 88W8887 configuration
-
-Signed-off-by: Zahari Petkov <zahari@balena.io>
----
- arch/arm/boot/dts/overlays/README             |  2 +-
- .../boot/dts/overlays/balena-fin-overlay.dts  | 46 ++++++++++++++++++-
- 2 files changed, 45 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -472,7 +472,7 @@ Params: swap_lr                 Reverse
- 
- Name:   balena-fin
- Info:   Overlay that enables WiFi, Bluetooth and the GPIO expander on the
--        Balena Fin board.
-+        balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite.
- Load:   dtoverlay=balena-fin
- Params: <None>
- 
---- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
-@@ -11,6 +11,7 @@
- 			pinctrl-0 = <&sdio_pins>;
- 			bus-width = <4>;
- 			brcm,overclock-50 = <35>;
-+			non-removable;
- 			status = "okay";
- 		};
- 	};
-@@ -34,7 +35,8 @@
- 	fragment@2 {
- 		target-path = "/";
- 		__overlay__ {
--			// We should investigate how to switch to mmc-pwrseq-sd8787
-+			// We should switch to mmc-pwrseq-sd8787 after making it
-+			// compatible with sd8887
- 			// Currently that module requires two GPIOs to function since it
- 			// targets a slightly different chip
- 			power_ctrl: power_ctrl {
-@@ -46,10 +48,21 @@
- 			i2c_soft: i2c@0 {
- 				compatible = "i2c-gpio";
- 				gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>;
--				i2c-gpio,delay-us = <2>; /* ~100 kHz */
-+				i2c-gpio,delay-us = <5>;
-+				i2c-gpio,scl-open-drain;
-+				i2c-gpio,sda-open-drain;
- 				#address-cells = <1>;
- 				#size-cells = <0>;
- 			};
-+
-+			sd8xxx-wlan {
-+				drvdbg = <0x6>;
-+				drv_mode = <0x1>;
-+				cfg80211_wext = <0xf>;
-+				sta_name = "wlan";
-+				wfd_name = "p2p";
-+				cal_data_cfg = "none";
-+			};
- 		};
- 	};
- 
-@@ -74,6 +87,35 @@
- 				reg = <0x68>;
- 				status = "okay";
- 			};
-+
-+			// RGB LEDs (>= v1.1.0)
-+			pca9633: pca9633@62 {
-+				compatible = "nxp,pca9633";
-+				reg = <0x62>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				red@0 {
-+					label = "red";
-+					reg = <0>;
-+					linux,default-trigger = "none";
-+				};
-+				green@1 {
-+					label = "green";
-+					reg = <1>;
-+					linux,default-trigger = "none";
-+				};
-+				blue@2 {
-+					label = "blue";
-+					reg = <2>;
-+					linux,default-trigger = "none";
-+				};
-+				unused@3 {
-+					label = "unused";
-+					reg = <3>;
-+					linux,default-trigger = "none";
-+				};
-+			};
- 		};
- 	};
- };