X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0451-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch;fp=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0451-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch;h=0000000000000000000000000000000000000000;hb=84d555aa74434392b682fd9eb0fa701c89a046d6;hp=53fc19c0f203421e15ee4c80d140b9caeeecca7f;hpb=953973c2991e8640549a55df7a0574a1abac8644;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/brcm2708/patches-4.19/950-0451-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch b/target/linux/brcm2708/patches-4.19/950-0451-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch
deleted file mode 100644
index 53fc19c0f2..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0451-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 3f6fe9da303fc01fb754a0a639ec3cdb813e8780 Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <wahrenst@gmx.net>
-Date: Sun, 19 May 2019 12:20:00 +0200
-Subject: [PATCH] ARM: bcm283x: Reduce register ranges for UART, SPI
- and I2C
-
-The assigned register ranges for UART, SPI and I2C were too wasteful.
-In order to avoid overlapping with the new functions on BCM2838
-reduce the ranges.
-
-Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
----
- arch/arm/boot/dts/bcm283x.dtsi | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm283x.dtsi
-+++ b/arch/arm/boot/dts/bcm283x.dtsi
-@@ -387,7 +387,7 @@
- 
- 		uart0: serial@7e201000 {
- 			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
--			reg = <0x7e201000 0x1000>;
-+			reg = <0x7e201000 0x200>;
- 			interrupts = <2 25>;
- 			clocks = <&clocks BCM2835_CLOCK_UART>,
- 				 <&clocks BCM2835_CLOCK_VPU>;
-@@ -418,7 +418,7 @@
- 
- 		spi: spi@7e204000 {
- 			compatible = "brcm,bcm2835-spi";
--			reg = <0x7e204000 0x1000>;
-+			reg = <0x7e204000 0x200>;
- 			interrupts = <2 22>;
- 			clocks = <&clocks BCM2835_CLOCK_VPU>;
- 			#address-cells = <1>;
-@@ -428,7 +428,7 @@
- 
- 		i2c0: i2c@7e205000 {
- 			compatible = "brcm,bcm2835-i2c";
--			reg = <0x7e205000 0x1000>;
-+			reg = <0x7e205000 0x200>;
- 			interrupts = <2 21>;
- 			clocks = <&clocks BCM2835_CLOCK_VPU>;
- 			#address-cells = <1>;