X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0611-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch;fp=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0611-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch;h=0000000000000000000000000000000000000000;hb=67dcc43f3a22dc3a7ac07a7065971b426feeb043;hp=8313799f5344e3537301435f3e0bc2137481a87d;hpb=47a93a810f78adce5a130d287f82b28e9b54313c;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/brcm2708/patches-4.19/950-0611-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch b/target/linux/brcm2708/patches-4.19/950-0611-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch
deleted file mode 100644
index 8313799f53..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0611-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From e5cefebc24b7684f4f84a539259612c8f5a4975b Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <wahrenst@gmx.net>
-Date: Thu, 2 May 2019 23:42:29 +0200
-Subject: [PATCH 611/806] HACK: clk-bcm2835: Add BCM2838_CLOCK_EMMC2 support
-
-The new BCM2838 supports an additional emmc2 clock. So add a new
-compatible to register this clock only for BCM2838.
-
-Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
----
- drivers/clk/bcm/clk-bcm2835.c       | 20 ++++++++++++++++++--
- include/dt-bindings/clock/bcm2835.h |  2 ++
- 2 files changed, 20 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -124,6 +124,8 @@
- #define CM_AVEODIV		0x1bc
- #define CM_EMMCCTL		0x1c0
- #define CM_EMMCDIV		0x1c4
-+#define CM_EMMC2CTL		0x1d0
-+#define CM_EMMC2DIV		0x1d4
- 
- /* General bits for the CM_*CTL regs */
- # define CM_ENABLE			BIT(4)
-@@ -2047,6 +2049,15 @@ static const struct bcm2835_clk_desc clk
- 		.frac_bits = 8,
- 		.tcnt_mux = 39),
- 
-+	/* EMMC2 clock (only available for BCM2838) */
-+	[BCM2838_CLOCK_EMMC2]	= REGISTER_PER_CLK(
-+		.name = "emmc2",
-+		.ctl_reg = CM_EMMC2CTL,
-+		.div_reg = CM_EMMC2DIV,
-+		.int_bits = 4,
-+		.frac_bits = 8,
-+		.tcnt_mux = 42),
-+
- 	/* General purpose (GPIO) clocks */
- 	[BCM2835_CLOCK_GP0]	= REGISTER_PER_CLK(
- 		.name = "gp0",
-@@ -2276,8 +2287,12 @@ static int bcm2835_clk_probe(struct plat
- 
- 	for (i = 0; i < asize; i++) {
- 		desc = &clk_desc_array[i];
--		if (desc->clk_register && desc->data)
--			hws[i] = desc->clk_register(cprman, desc->data);
-+		if (desc->clk_register && desc->data) {
-+			if ((i != BCM2838_CLOCK_EMMC2) ||
-+			    of_device_is_compatible(fw_node, "brcm,bcm2838-cprman")) {
-+				hws[i] = desc->clk_register(cprman, desc->data);
-+			}
-+		}
- 	}
- 
- 	ret = bcm2835_mark_sdc_parent_critical(hws[BCM2835_CLOCK_SDRAM]->clk);
-@@ -2297,6 +2312,7 @@ static int bcm2835_clk_probe(struct plat
- 
- static const struct of_device_id bcm2835_clk_of_match[] = {
- 	{ .compatible = "brcm,bcm2835-cprman", },
-+	{ .compatible = "brcm,bcm2838-cprman", },
- 	{}
- };
- MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
---- a/include/dt-bindings/clock/bcm2835.h
-+++ b/include/dt-bindings/clock/bcm2835.h
-@@ -66,3 +66,5 @@
- #define BCM2835_CLOCK_DSI1E		48
- #define BCM2835_CLOCK_DSI0P		49
- #define BCM2835_CLOCK_DSI1P		50
-+
-+#define BCM2838_CLOCK_EMMC2		51