X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0681-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch;fp=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0681-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch;h=0000000000000000000000000000000000000000;hb=84d555aa74434392b682fd9eb0fa701c89a046d6;hp=9be42a6a247dfca858c81530381eee4ba6c6b65a;hpb=953973c2991e8640549a55df7a0574a1abac8644;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/brcm2708/patches-4.19/950-0681-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch b/target/linux/brcm2708/patches-4.19/950-0681-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch
deleted file mode 100644
index 9be42a6a24..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0681-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From 7a4d12054b24c8cb980be4c6466b50c14beb78d3 Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.org>
-Date: Wed, 28 Aug 2019 13:35:19 +0100
-Subject: [PATCH] dtoverlays: Add overlay for the Sony IMX219 image
- sensor.
-
-Adds an overlay for the IMX219 image sensor, connected to the
-Unicam CSI2 receiver peripheral.
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/Makefile           |   1 +
- arch/arm/boot/dts/overlays/README             |  12 ++
- arch/arm/boot/dts/overlays/imx219-overlay.dts | 129 ++++++++++++++++++
- 3 files changed, 142 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/imx219-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -77,6 +77,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	i2c6.dtbo \
- 	i2s-gpio28-31.dtbo \
- 	ilitek251x.dtbo \
-+	imx219.dtbo \
- 	iqaudio-codec.dtbo \
- 	iqaudio-dac.dtbo \
- 	iqaudio-dacplus.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1269,6 +1269,18 @@ Params: interrupt               GPIO use
-                                 touchscreen (in pixels)
- 
- 
-+Name:   imx219
-+Info:   Sony IMX219 camera module.
-+        Uses Unicam 1, which is the standard camera connector on most Pi
-+        variants.
-+Load:   dtoverlay=imx219,<param>=<val>
-+Params: i2c_pins_0_1            Use pins 0&1 for the I2C instead of 44&45.
-+                                Useful on Compute Modules.
-+
-+        i2c_pins_28_29          Use pins 28&29 for the I2C instead of 44&45.
-+                                This is required for Pi B+, 2, 0, and 0W.
-+
-+
- Name:   iqaudio-codec
- Info:   Configures the IQaudio Codec audio card
- Load:   dtoverlay=iqaudio-codec
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/imx219-overlay.dts
-@@ -0,0 +1,129 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+// Definitions for IMX219 camera module on VC I2C bus
-+/dts-v1/;
-+/plugin/;
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/{
-+	compatible = "brcm,bcm2835";
-+
-+	fragment@0 {
-+		target = <&i2c_vc>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			imx219: imx219@10 {
-+				compatible = "sony,imx219";
-+				reg = <0x10>;
-+				status = "okay";
-+
-+				clocks = <&imx219_clk>;
-+				clock-names = "xclk";
-+
-+				VANA-supply = <&imx219_vana>;	/* 2.8v */
-+				VDIG-supply = <&imx219_vdig>;	/* 1.8v */
-+				VDDL-supply = <&imx219_vddl>;	/* 1.2v */
-+
-+				imx219_clk: camera-clk {
-+					compatible = "fixed-clock";
-+					#clock-cells = <0>;
-+					clock-frequency = <24000000>;
-+				};
-+
-+				port {
-+					imx219_0: endpoint {
-+						remote-endpoint = <&csi1_ep>;
-+						clock-lanes = <0>;
-+						data-lanes = <1 2>;
-+						clock-noncontinuous;
-+						link-frequencies =
-+							/bits/ 64 <297000000>;
-+					};
-+				};
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&csi1>;
-+		__overlay__ {
-+			status = "okay";
-+
-+			port {
-+				csi1_ep: endpoint {
-+					remote-endpoint = <&imx219_0>;
-+				};
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&i2c0_pins>;
-+		__dormant__ {
-+			brcm,pins = <28 29>;
-+			brcm,function = <4>; /* alt0 */
-+		};
-+	};
-+	fragment@3 {
-+		target = <&i2c0_pins>;
-+		__overlay__ {
-+			brcm,pins = <44 45>;
-+			brcm,function = <5>; /* alt1 */
-+		};
-+	};
-+	fragment@4 {
-+		target = <&i2c0_pins>;
-+		__dormant__ {
-+			brcm,pins = <0 1>;
-+			brcm,function = <4>; /* alt0 */
-+		};
-+	};
-+	fragment@5 {
-+		target = <&i2c_vc>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@6 {
-+		target-path="/";
-+		__overlay__ {
-+			imx219_vana: fixedregulator@0 {
-+				compatible = "regulator-fixed";
-+				regulator-name = "imx219_vana";
-+				regulator-min-microvolt = <2800000>;
-+				regulator-max-microvolt = <2800000>;
-+				gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
-+				enable-active-high;
-+			};
-+			imx219_vdig: fixedregulator@1 {
-+				compatible = "regulator-fixed";
-+				regulator-name = "imx219_vdig";
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+			};
-+			imx219_vddl: fixedregulator@2 {
-+				compatible = "regulator-fixed";
-+				regulator-name = "imx219_vddl";
-+				regulator-min-microvolt = <1200000>;
-+				regulator-max-microvolt = <1200000>;
-+			};
-+		};
-+	};
-+
-+	fragment@7 {
-+		target-path="/__overrides__";
-+		__overlay__ {
-+			cam0-pwdn-ctrl = <&imx219_vana>,"gpio:0";
-+			cam0-pwdn      = <&imx219_vana>,"gpio:4";
-+		};
-+	};
-+
-+	__overrides__ {
-+		i2c_pins_0_1 = <0>,"-2-3+4";
-+		i2c_pins_28_29 = <0>,"+2-3-4";
-+	};
-+};