X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch;fp=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch;h=0000000000000000000000000000000000000000;hb=7d7aa2fd924c27829ec25f825481554dd81bce97;hp=1202d10d312bb240c0865c9fc8dc9b0bb9354432;hpb=e7bfda2c243e66a75ff966ba04c28b1590b5d24c;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch b/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch
deleted file mode 100644
index 1202d10d31..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 89af5d7df7f548744bd675d96295c0f45e24b31f Mon Sep 17 00:00:00 2001
-From: Markus Proeller <markus.proeller@pieye.org>
-Date: Thu, 10 Oct 2019 19:13:02 +0200
-Subject: [PATCH] dtoverlays: Add an overlay for the Infineon IRS1125
-
-The Infineon IRS1125 is a CSI2 time of flight depth sensor
-which has a suitable V4L2 subdevice driver.
-
-Add an overlay for configuring it.
-
-Signed-off-by: Markus Proeller <markus.proeller@pieye.org>
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             | 12 +++
- .../arm/boot/dts/overlays/irs1125-overlay.dts | 97 +++++++++++++++++++
- 3 files changed, 110 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/irs1125-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -83,6 +83,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	iqaudio-dac.dtbo \
- 	iqaudio-dacplus.dtbo \
- 	iqaudio-digi-wm8804-audio.dtbo \
-+	irs1125.dtbo \
- 	jedec-spi-nor.dtbo \
- 	justboom-dac.dtbo \
- 	justboom-digi.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1347,6 +1347,18 @@ Params: card_name               Override
-                                 dai stream name.
- 
- 
-+Name:   irs1125
-+Info:   Infineon irs1125 TOF camera module.
-+        Uses Unicam 1, which is the standard camera connector on most Pi
-+        variants.
-+Load:   dtoverlay=irs1125,<param>=<val>
-+Params: i2c_pins_0_1            Use pins 0&1 for the I2C instead of 44&45.
-+                                Useful on Compute Modules.
-+
-+        i2c_pins_28_29          Use pins 28&29 for the I2C instead of 44&45.
-+                                This is required for Pi B+, 2, 0, and 0W.
-+
-+
- Name:   jedec-spi-nor
- Info:   Adds support for JEDEC-compliant SPI NOR flash devices.  (Note: The
-         "jedec,spi-nor" kernel driver was formerly known as "m25p80".)
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/irs1125-overlay.dts
-@@ -0,0 +1,97 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+// Definitions for IRS1125 camera module on VC I2C bus
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+	compatible = "brcm,bcm2835";
-+
-+	fragment@0 {
-+		target = <&i2c_vc>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			irs1125: irs1125@3D {
-+				compatible = "infineon,irs1125";
-+				reg = <0x3D>;
-+				status = "okay";
-+
-+				pwdn-gpios = <&gpio 5 0>;
-+				clocks = <&irs1125_clk>;
-+
-+				irs1125_clk: camera-clk {
-+					compatible = "fixed-clock";
-+					#clock-cells = <0>;
-+					clock-frequency = <26000000>;
-+				};
-+
-+				port {
-+					irs1125_0: endpoint {
-+						remote-endpoint = <&csi1_ep>;
-+						clock-lanes = <0>;
-+						data-lanes = <1 2>;
-+						clock-noncontinuous;
-+						link-frequencies =
-+							/bits/ 64 <297000000>;
-+					};
-+				};
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&csi1>;
-+		__overlay__ {
-+			status = "okay";
-+
-+			port {
-+				csi1_ep: endpoint {
-+					remote-endpoint = <&irs1125_0>;
-+				};
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&i2c0_pins>;
-+		__dormant__ {
-+			brcm,pins = <28 29>;
-+			brcm,function = <4>; /* alt0 */
-+		};
-+	};
-+	fragment@3 {
-+		target = <&i2c0_pins>;
-+		__overlay__ {
-+			brcm,pins = <44 45>;
-+			brcm,function = <5>; /* alt1 */
-+		};
-+	};
-+	fragment@4 {
-+		target = <&i2c0_pins>;
-+		__dormant__ {
-+			brcm,pins = <0 1>;
-+			brcm,function = <4>; /* alt0 */
-+		};
-+	};
-+	fragment@5 {
-+		target = <&i2c_vc>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@6 {
-+		target-path="/__overrides__";
-+		__overlay__ {
-+			cam0-pwdn-ctrl = <&irs1125>,"pwdn-gpios:0";
-+			cam0-pwdn      = <&irs1125>,"pwdn-gpios:4";
-+		};
-+	};
-+
-+	__overrides__ {
-+		i2c_pins_0_1 = <0>,"-2-3+4";
-+		i2c_pins_28_29 = <0>,"+2-3-4";
-+	};
-+};