X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=2b908c800f241e99d64b90531623466f498c80ec;hb=51b9aef553a82cbc80c12e13a4011d4d2e29fde4;hp=cd336a9e6a9e7be6e04861345483e421a946290e;hpb=f103321349182d5fef5a1b846f017db32005da87;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
old mode 100755
new mode 100644
index cd336a9e6a..2b908c800f
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (c) 2015 The Linux Foundation. All rights reserved.
 # Copyright (c) 2011-2015 OpenWrt.org
@@ -16,7 +15,11 @@ ipq40xx_setup_interfaces()
 	8dev,jalapeno|\
 	alfa-network,ap120c-ac|\
 	engenius,emr3500|\
-	engenius,ens620ext)
+	engenius,ens620ext|\
+	luma,wrtq-329acn|\
+	netgear,wac510|\
+	plasmacloud,pa1200|\
+	plasmacloud,pa2200)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
 	aruba,ap-303|\
@@ -26,23 +29,33 @@ ipq40xx_setup_interfaces()
 	engenius,eap1300|\
 	engenius,emd1|\
 	meraki,mr33|\
+	mikrotik,lhgg-60ad|\
+	mikrotik,sxtsq-5-ac|\
 	netgear,ex6100v2|\
 	netgear,ex6150v2|\
 	zyxel,wre6606)
 		ucidef_set_interface_lan "eth0"
 		;;
-	aruba,ap-303h)
+	aruba,ap-303h|\
+	teltonika,rutx10)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
 		;;
 	asus,map-ac2200|\
 	cilab,meshpoint-one|\
+	edgecore,ecw5211|\
+	edgecore,oap100|\
 	openmesh,a42|\
 	openmesh,a62)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
+	asus,rt-ac42u|\
 	asus,rt-ac58u|\
+	mikrotik,hap-ac2|\
+	mikrotik,hap-ac3|\
+	p2w,r619ac-64m|\
+	p2w,r619ac-128m|\
 	zyxel,nbg6617)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
@@ -50,42 +63,68 @@ ipq40xx_setup_interfaces()
 		;;
 	avm,fritzbox-4040|\
 	linksys,ea6350v3|\
-	linksys,ea8300)
+	linksys,ea8300|\
+	linksys,mr8300)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
 	avm,fritzbox-7530)
 		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+			"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+	avm,fritzrepeater-3000)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "4:lan:1" "5:lan:2"
 		;;
-	avm,fritzrepeater-3000|\
 	compex,wpj419|\
 	compex,wpj428|\
 	engenius,eap2200)
 		ucidef_set_interface_lan "eth0 eth1"
 		;;
+	buffalo,wtr-m2133hp)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
 	cellc,rtl30vw)
 		ucidef_set_interface_lan "eth0"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "3:lan" "4:lan"
 		;;
+	devolo,magic-2-wifi-next)
+		ucidef_set_interface_lan "eth0 eth1 eth2"
+		;;
 	ezviz,cs-w3-wd1200g-eup)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
 		;;
+	glinet,gl-ap1300 |\
 	glinet,gl-b1300 |\
 	glinet,gl-s1300)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "3:lan" "4:lan"
 		;;
+	glinet,gl-b2200)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan" "2:lan" "3:lan" "5:lan" "0u@eth1" "4:wan"
+		;;
 	mobipromo,cm520-79f)
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "3:lan:2" "4:lan:1"
 		ucidef_set_interface_wan "eth1"
 		;;
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan" "3:lan" "4:lan"
+		ucidef_set_interface_wan "eth1"
+		;;
 	qxwlan,e2600ac-c1 |\
 	qxwlan,e2600ac-c2)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -115,7 +154,6 @@ ipq40xx_setup_macs()
 		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
 		;;
 	asus,rt-ac58u)
-		CI_UBIPART=UBI_DEV
 		wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
 		lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
 		label_mac=$wan_mac
@@ -123,6 +161,10 @@ ipq40xx_setup_macs()
 	cilab,meshpoint-one)
 		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
 		;;
+	devolo,magic-2-wifi-next)
+		lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
+		label_mac=$lan_mac
+		;;
 	dlink,dap-2610)
 		lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
 		label_mac=$lan_mac
@@ -148,6 +190,17 @@ ipq40xx_setup_macs()
 		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
+	mikrotik,hap-ac2|\
+	mikrotik,hap-ac3)
+		wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		lan_mac=$(macaddr_add $wan_mac 1)
+		label_mac="$wan_mac"
+		;;
+	mikrotik,lhgg-60ad|\
+	mikrotik,sxtsq-5-ac)
+		lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		label_mac="$lan_mac"
+		;;
 	esac
 
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac