X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=d744e9b7e2b2dfdeecb72314abaa4d0c5ac6473f;hb=e24635710c7e6444afa463c59f3d81fe634eb3c7;hp=122c1a103d907a20bdb8136942941ca75cb3c350;hpb=146eb4925c7f32650f38cb52139696a827051700;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 122c1a103d..d744e9b7e2 100755
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -12,13 +12,35 @@ ipq40xx_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
+	8dev,habanero-dvk|\
 	8dev,jalapeno|\
 	alfa-network,ap120c-ac|\
-	engenius,ens620ext)
+	engenius,emr3500|\
+	engenius,ens620ext|\
+	luma,wrtq-329acn)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
+	aruba,ap-303|\
+	aruba,ap-365|\
+	avm,fritzrepeater-1200|\
+	dlink,dap-2610 |\
+	engenius,eap1300|\
+	engenius,emd1|\
+	meraki,mr33|\
+	netgear,ex6100v2|\
+	netgear,ex6150v2|\
+	zyxel,wre6606)
+		ucidef_set_interface_lan "eth0"
+		;;
+	aruba,ap-303h)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
+		;;
 	asus,map-ac2200|\
 	cilab,meshpoint-one|\
+	edgecore,ecw5211|\
+	edgecore,oap100|\
 	openmesh,a42|\
 	openmesh,a62)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
@@ -40,24 +62,41 @@ ipq40xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
-	avm,fritzrepeater-1200|\
-	engenius,eap1300|\
-	meraki,mr33|\
-	netgear,ex6100v2|\
-	netgear,ex6150v2|\
-	zyxel,wre6606)
-		ucidef_set_interface_lan "eth0"
+	avm,fritzrepeater-3000)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "4:lan:1" "5:lan:2"
 		;;
-	avm,fritzrepeater-3000|\
 	compex,wpj419|\
-	compex,wpj428)
+	compex,wpj428|\
+	engenius,eap2200)
 		ucidef_set_interface_lan "eth0 eth1"
 		;;
-	glinet,gl-b1300)
+	buffalo,wtr-m2133hp)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+	cellc,rtl30vw)
+		ucidef_set_interface_lan "eth0"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "3:lan" "4:lan"
 		;;
+	ezviz,cs-w3-wd1200g-eup)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
+		;;
+	glinet,gl-b1300 |\
+	glinet,gl-s1300)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "3:lan" "4:lan"
+		;;
+	mobipromo,cm520-79f)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "3:lan:2" "4:lan:1"
+		ucidef_set_interface_wan "eth1"
+		;;
 	qxwlan,e2600ac-c1 |\
 	qxwlan,e2600ac-c2)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -78,20 +117,44 @@ ipq40xx_setup_interfaces()
 ipq40xx_setup_macs()
 {
 	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
 
 	case "$board" in
+	8dev,habanero-dvk)
+		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
+		;;
 	asus,rt-ac58u)
 		CI_UBIPART=UBI_DEV
-		wan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
-		lan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+		wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+		lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
+		label_mac=$wan_mac
 		;;
 	cilab,meshpoint-one)
 		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
 		;;
+	dlink,dap-2610)
+		lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
+		label_mac=$lan_mac
+		;;
+	engenius,eap2200|\
+	engenius,emd1)
+		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		label_mac=$lan_mac
+		;;
+	engenius,emr3500)
+		wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
+		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		label_mac=$wan_mac
+		;;
 	engenius,ens620ext)
 		wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
+	ezviz,cs-w3-wd1200g-eup)
+		label_mac=$(mtd_get_mac_binary "ART" 0x6)
+		;;
 	linksys,ea6350v3)
 		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		lan_mac=$(macaddr_add "$wan_mac" 1)