X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F11-ath10k-caldata;fp=target%2Flinux%2Fipq40xx%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F11-ath10k-caldata;h=e0b4eed6f2b94481007de0a2d7e7fc090e51e0a6;hb=4d4462cc2ace4b044e99e9b22a24cb4d89c7db95;hp=c02b12dceb19283ed734b05fa8d489cabe0798f6;hpb=3daf2d477ee728b5b066fe7f31808a5f19bb98a1;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c02b12dceb..e0b4eed6f2 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -215,6 +215,29 @@ case "$FIRMWARE" in
 		;;
 	esac
 	;;
+"ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
+	case "$board" in
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
+		;;
+	esac
+	;;
+"ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
+	case "$board" in
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+	mikrotik,sxtsq-5-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
+		;;
+	esac
+	;;
 *)
 	exit 1
 	;;