X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F11-ath10k-caldata;h=7498e1c71040e8dbb76f7742e6971da66f7c455c;hb=ce6c9e0328a563082d12397068fbf2eb2a227d24;hp=c02b12dceb19283ed734b05fa8d489cabe0798f6;hpb=af425e42212d476dd95ec31f18d85b19004c9268;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c02b12dceb..7498e1c710 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -9,10 +9,10 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:01:00.0.bin")
 	case "$board" in
-	meraki,mr33)
+	meraki,mr33 |\
+	meraki,mr74)
 		caldata_extract_ubi "ART" 0x9000 0x844
 		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
 		;;
 	esac
 	;;
@@ -34,10 +34,6 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
-	openmesh,a62 |\
-	plasmacloud,pa2200)
-		caldata_extract "0:ART" 0x9000 0x2f20
-		;;
 	linksys,ea8300 |\
 	linksys,mr8300)
 		caldata_extract "ART" 0x9000 0x2f20
@@ -76,11 +72,7 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
-	cellc,rtl30vw |\
-	openmesh,a42 |\
-	openmesh,a62 |\
-	plasmacloud,pa1200 |\
-	plasmacloud,pa2200)
+	cellc,rtl30vw)
 		caldata_extract "0:ART" 0x1000 0x2f20
 		;;
 	devolo,magic-2-wifi-next)
@@ -103,19 +95,25 @@ case "$FIRMWARE" in
 		caldata_extract "ART" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 		;;
+	extreme-networks,ws-ap3915i)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
+		;;
 	linksys,ea8300 |\
 	linksys,mr8300)
 		caldata_extract "ART" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 		;;
-	meraki,mr33)
+	meraki,mr33 |\
+	meraki,mr74)
 		caldata_extract_ubi "ART" 0x1000 0x2f20
 		caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
 		;;
 	mikrotik,cap-ac |\
 	mikrotik,hap-ac2 |\
-	mikrotik,hap-ac3)
+	mikrotik,hap-ac3 |\
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,wap-ac)
 		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
 		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
@@ -127,6 +125,17 @@ case "$FIRMWARE" in
 		caldata_extract_mmc "0:ART" 0x1000 0x2f20
 		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 		;;
+	pakedge,wr-1)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
+		;;
+	teltonika,rutx10)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
+		;;
+	sony,ncp-hg100-cellular)
+		caldata_extract_mmc "0:ART" 0x1000 0x2f20
+		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
 		caldata_extract "ART" 0x1000 0x2f20
@@ -156,11 +165,7 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
-	cellc,rtl30vw |\
-	openmesh,a42 |\
-	openmesh,a62 |\
-	plasmacloud,pa1200 |\
-	plasmacloud,pa2200)
+	cellc,rtl30vw)
 		caldata_extract "0:ART" 0x5000 0x2f20
 		;;
 	devolo,magic-2-wifi-next)
@@ -183,20 +188,26 @@ case "$FIRMWARE" in
 		caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 		;;
+	extreme-networks,ws-ap3915i)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
+		;;
 	linksys,ea8300 |\
 	linksys,mr8300)
 		caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 		;;
-	meraki,mr33)
+	meraki,mr33 |\
+	meraki,mr74)
 		caldata_extract_ubi "ART" 0x5000 0x2f20
 		caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
 		;;
 	mikrotik,cap-ac |\
 	mikrotik,hap-ac2 |\
 	mikrotik,hap-ac3 |\
-	mikrotik,sxtsq-5-ac)
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,sxtsq-5-ac |\
+	mikrotik,wap-ac)
 		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
 		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
@@ -208,6 +219,17 @@ case "$FIRMWARE" in
 		caldata_extract_mmc "0:ART" 0x5000 0x2f20
 		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 		;;
+	pakedge,wr-1)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
+		;;
+	teltonika,rutx10)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
+		;;
+	sony,ncp-hg100-cellular)
+		caldata_extract_mmc "0:ART" 0x5000 0x2f20
+		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
 		caldata_extract "ART" 0x5000 0x2f20
@@ -215,6 +237,33 @@ case "$FIRMWARE" in
 		;;
 	esac
 	;;
+"ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
+	case "$board" in
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,wap-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
+		;;
+	esac
+	;;
+"ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
+	case "$board" in
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+        mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,sxtsq-5-ac |\
+	mikrotik,wap-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
+		;;
+	esac
+	;;
 *)
 	exit 1
 	;;