X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fimage%2Fgeneric.mk;h=78fa22c2345a09ce1d5338bf310d59a1adfa9232;hb=bb4a25860f593790aaedc1b31dde33fbc519e7bf;hp=0ddff52ef89f75113b0ce50b4484f8b2d3dfb460;hpb=b4184c666c13fdf08ecd3abf340538d593e9084c;p=openwrt%2Fstaging%2Fjow.git

diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index 0ddff52ef8..78fa22c234 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -4,28 +4,28 @@ DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
 
 define Device/FitImage
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_SUFFIX := -uImage.itb
+	KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 	KERNEL_NAME := Image
 endef
 
 define Device/FitImageLzma
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_SUFFIX := -uImage.itb
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
 	KERNEL_NAME := Image
 endef
 
 define Device/FitzImage
-	KERNEL_SUFFIX := -fit-zImage.itb
-	KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_SUFFIX := -zImage.itb
+	KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
 	KERNEL_NAME := zImage
 endef
 
 define Device/UbiFit
 	KERNEL_IN_UBI := 1
-	IMAGES := nand-factory.ubi nand-sysupgrade.bin
-	IMAGE/nand-factory.ubi := append-ubi
-	IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
+	IMAGES := factory.ubi sysupgrade.bin
+	IMAGE/factory.ubi := append-ubi
+	IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 endef
 
 define Device/DniImage
@@ -43,7 +43,8 @@ define Build/append-rootfshdr
 		-O linux -T filesystem \
 		-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
 		-n root.squashfs -d $(IMAGE_ROOTFS) $@.new
-	dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
+	cat $(IMAGE_KERNEL) > $@.$1
+	dd if=$@.new bs=64 count=1 >> $@.$1
 endef
 
 define Build/append-rutx-metadata
@@ -89,7 +90,7 @@ endef
 
 define Build/qsdk-ipq-factory-nand-askey
 	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
-		askey_kernel $(IMAGE_KERNEL) \
+		askey_kernel $@.$1 \
 		askey_fs $(IMAGE_ROOTFS) \
 		ubifs $@
 	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@@ -159,8 +160,8 @@ define Device/alfa-network_ap120c-ac
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	IMAGE_SIZE := 65536k
-	IMAGES := nand-factory.bin nand-sysupgrade.bin
-	IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+	IMAGES := factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += alfa-network_ap120c-ac
 
@@ -185,7 +186,7 @@ TARGET_DEVICES += aruba_ap-303h
 define Device/aruba_ap-365
 	$(call Device/aruba_glenmorangie)
 	DEVICE_MODEL := AP-365
-	DEVICE_PACKAGES := kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
+	DEVICE_PACKAGES := kmod-hwmon-ad7418
 endef
 TARGET_DEVICES += aruba_ap-365
 
@@ -272,7 +273,7 @@ define Device/avm_fritzbox-7530
 	DEVICE_ALT0_VENDOR := AVM
 	DEVICE_ALT0_MODEL := FRITZ!Box 7520
 	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
 endef
 TARGET_DEVICES += avm_fritzbox-7530
 
@@ -307,14 +308,14 @@ endef
 TARGET_DEVICES += buffalo_wtr-m2133hp
 
 define Device/cellc_rtl30vw
-	KERNEL_SUFFIX := -fit-zImage.itb
-	KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
+	KERNEL_SUFFIX := -zImage.itb
+	KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+	KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 	KERNEL_NAME := zImage
 	KERNEL_IN_UBI :=
-	IMAGES := nand-factory.bin nand-sysupgrade.bin
-	IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
-	IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
+	IMAGES := factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
+	IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 	DEVICE_VENDOR := Cell C
 	DEVICE_MODEL := RTL30VW
 	SOC := qcom-ipq4019
@@ -332,9 +333,10 @@ define Device/cilab_meshpoint-one
 	$(call Device/8dev_jalapeno-common)
 	DEVICE_VENDOR := Crisis Innovation Lab
 	DEVICE_MODEL := MeshPoint.One
-	DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
+	DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 endef
-TARGET_DEVICES += cilab_meshpoint-one
+# Missing DSA Setup
+#TARGET_DEVICES += cilab_meshpoint-one
 
 define Device/compex_wpj419
 	$(call Device/FitImage)
@@ -348,7 +350,8 @@ define Device/compex_wpj419
 	PAGESIZE := 2048
 	FILESYSTEMS := squashfs
 endef
-TARGET_DEVICES += compex_wpj419
+# Missing DSA Setup
+#TARGET_DEVICES += compex_wpj419
 
 define Device/compex_wpj428
 	$(call Device/FitImage)
@@ -376,16 +379,16 @@ define Device/devolo_magic-2-wifi-next
 
 	# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 	# it will bootm it, just like we want for the initramfs.
-	KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
+	KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 		append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 
 	IMAGE_SIZE := 26624k
 	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 	DEFAULT := n
 endef
-TARGET_DEVICES += devolo_magic-2-wifi-next
+# Missing DSA Setup
+#TARGET_DEVICES += devolo_magic-2-wifi-next
 
 define Device/dlink_dap-2610
 	$(call Device/FitImageLzma)
@@ -434,11 +437,12 @@ define Device/edgecore_oap100
 	SOC := qcom-ipq4019
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	IMAGES := nand-sysupgrade.bin
+	IMAGES := sysupgrade.bin
 	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
-	DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
+	DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 endef
-TARGET_DEVICES += edgecore_oap100
+# Missing DSA Setup
+#TARGET_DEVICES += edgecore_oap100
 
 define Device/engenius_eap1300
 	$(call Device/FitImage)
@@ -451,7 +455,8 @@ define Device/engenius_eap1300
 	IMAGE_SIZE := 25344k
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 endef
-TARGET_DEVICES += engenius_eap1300
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap1300
 
 define Device/engenius_eap2200
 	$(call Device/FitImage)
@@ -463,7 +468,8 @@ define Device/engenius_eap2200
 	PAGESIZE := 2048
 	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 endef
-TARGET_DEVICES += engenius_eap2200
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap2200
 
 define Device/engenius_emd1
 	$(call Device/FitImage)
@@ -476,7 +482,8 @@ define Device/engenius_emd1
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 endef
-TARGET_DEVICES += engenius_emd1
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emd1
 
 define Device/engenius_emr3500
 	$(call Device/FitImage)
@@ -491,7 +498,8 @@ define Device/engenius_emr3500
 	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 	DEFAULT := n
 endef
-TARGET_DEVICES += engenius_emr3500
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emr3500
 
 define Device/engenius_ens620ext
 	$(call Device/FitImage)
@@ -517,7 +525,19 @@ define Device/engenius_ens620ext
 	IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 	IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 endef
-TARGET_DEVICES += engenius_ens620ext
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_ens620ext
+
+define Device/extreme-networks_ws-ap3915i
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Extreme Networks
+	DEVICE_MODEL := WS-AP3915i
+	IMAGE_SIZE := 30080k
+	SOC := qcom-ipq4029
+	BLOCKSIZE := 128k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += extreme-networks_ws-ap3915i
 
 define Device/ezviz_cs-w3-wd1200g-eup
 	$(call Device/FitImage)
@@ -536,6 +556,19 @@ define Device/ezviz_cs-w3-wd1200g-eup
 endef
 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 
+define Device/glinet_gl-a1300
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-A1300
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 131072k
+endef
+TARGET_DEVICES += glinet_gl-a1300
+
 define Device/glinet_gl-ap1300
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
@@ -547,7 +580,7 @@ define Device/glinet_gl-ap1300
 	PAGESIZE := 2048
 	IMAGE_SIZE := 131072k
 	KERNEL_INSTALL := 1
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 endef
 TARGET_DEVICES += glinet_gl-ap1300
 
@@ -576,7 +609,7 @@ define Device/glinet_gl-b2200
 		pad-to 33792k | append-rootfs |\
 		append-metadata | gzip
 	IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-glinet_gl-b2200 \
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 		kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 endef
 TARGET_DEVICES += glinet_gl-b2200
@@ -590,9 +623,21 @@ define Device/glinet_gl-s1300
 	IMAGE_SIZE := 26624k
 	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
+	DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += glinet_gl-s1300
+
+define Device/kernel-size-6350-8300
+	DEVICE_COMPAT_VERSION := 2.0
+	DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
+	this OpenWrt version. Before continuing, you MUST issue either the \
+	command "fw_setenv kernsize 500000" from the OpenWrt command line, \
+	or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
+	Instead of the sysupgrade image, you must then install the OpenWrt \
+	factory image, setting the force flag and wiping the configuration. \
+	(e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
 endef
-TARGET_DEVICES += glinet_gl-s1300
 
 define Device/linksys_ea6350v3
 	# The Linksys EA6350v3 has a uboot bootloader that does not
@@ -600,30 +645,32 @@ define Device/linksys_ea6350v3
 	# partitions. This uboot, however, supports raw kernel images and
 	# gzipped images.
 	#
-	# As for the time of writing this, the device will boot the kernel
-	# from a fixed address with a fixed length of 3MiB. Also, the
-	# device has a hard-coded kernel command line that requieres the
+	# As configured by the OEM factory, the device will boot the kernel
+	# from a fixed address with a fixed length of 3 MiB. Also, the
+	# device has a hard-coded kernel command line that requires the
 	# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 	# Oh... and the kernel partition overlaps with the rootfs
 	# partition (the same for alt_kernel and alt_rootfs).
 	#
 	# If you are planing re-partitioning the device, you may want to
-	# keep those details in mind:
-	# 1. The kernel adresses you should honor are 0x00000000 and
+	# keep these details in mind:
+	# 1. The kernel addresses you should honor are 0x00000000 and
 	#    0x02800000 respectively.
-	# 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
+	# 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
+	#    unless the uboot environment variable "kernsize" is increased.
 	# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 	# 4. The kernel command line from uboot is harcoded to boot with
 	#    rootfs either in mtd11 or mtd13.
 	$(call Device/FitzImage)
+	$(call Device/kernel-size-6350-8300)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := EA6350
 	DEVICE_VARIANT := v3
 	SOC := qcom-ipq4018
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 37888k
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 35840k
 	UBINIZE_OPTS := -E 5
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
@@ -632,27 +679,29 @@ TARGET_DEVICES += linksys_ea6350v3
 
 define Device/linksys_ea8300
 	$(call Device/FitzImage)
+	$(call Device/kernel-size-6350-8300)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := EA8300
 	SOC := qcom-ipq4019
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 87040k
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 84992k
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 	IMAGES += factory.bin
 	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += linksys_ea8300
 
 define Device/linksys_mr8300
 	$(call Device/FitzImage)
+	$(call Device/kernel-size-6350-8300)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := MR8300
 	SOC := qcom-ipq4019
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 87040k
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 84992k
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
@@ -662,24 +711,38 @@ define Device/linksys_mr8300
 endef
 TARGET_DEVICES += linksys_mr8300
 
-define Device/linksys_whw01-v1
+define Device/linksys_whw03v2
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := WHW03
+	DEVICE_VARIANT := V2
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 6144k
+	IMAGE_SIZE := 158720k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
+endef
+TARGET_DEVICES += linksys_whw03v2
+
+define Device/linksys_whw01
 	$(call Device/FitzImage)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := WHW01
-	DEVICE_VARIANT := v1
 	KERNEL_SIZE := 6144k
-	IMAGE_SIZE := 28704512  # 28032k minus linksys signature (256-bytes).
+	IMAGE_SIZE := 75776K
 	SOC := qcom-ipq4018
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 	IMAGES += factory.bin
-	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
-		append-ubi | linksys-image type=WHW01 | pad-to $$$$(PAGESIZE) | \
-		check-size
+	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
 	DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 endef
-TARGET_DEVICES += linksys_whw01-v1
+TARGET_DEVICES += linksys_whw01
 
 define Device/luma_wrtq-329acn
 	$(call Device/FitImage)
@@ -693,17 +756,30 @@ define Device/luma_wrtq-329acn
 endef
 TARGET_DEVICES += luma_wrtq-329acn
 
-define Device/meraki_mr33
+define Device/meraki_common
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Cisco Meraki
-	DEVICE_MODEL := MR33
 	SOC := qcom-ipq4029
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
+	DEVICE_PACKAGES := ath10k-firmware-qca9887-ct
+endef
+
+define Device/meraki_mr33
+	$(call Device/meraki_common)
+	DEVICE_MODEL := MR33
+	DEFAULT := n
 endef
 TARGET_DEVICES += meraki_mr33
 
+define Device/meraki_mr74
+	$(call Device/meraki_common)
+	DEVICE_MODEL := MR74
+	DEVICE_DTS_CONFIG := config@3
+	DEFAULT := n
+endef
+TARGET_DEVICES += meraki_mr74
+
 define Device/mobipromo_cm520-79f
 	$(call Device/FitzImage)
 	$(call Device/UbiFit)
@@ -807,8 +883,8 @@ define Device/netgear_wac510
 	DEVICE_DTS_CONFIG := config@5
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	IMAGES += nand-factory.tar
-	IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
+	IMAGES += factory.tar
+	IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
 	DEVICE_PACKAGES := uboot-envtools
 endef
 TARGET_DEVICES += netgear_wac510
@@ -820,7 +896,7 @@ define Device/openmesh_a42
 	SOC := qcom-ipq4018
 	DEVICE_DTS_CONFIG := config@om.a42
 	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15616k
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
@@ -835,7 +911,7 @@ define Device/openmesh_a62
 	SOC := qcom-ipq4019
 	DEVICE_DTS_CONFIG := config@om.a62
 	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15552k
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
@@ -853,14 +929,13 @@ define Device/p2w_r619ac
 	DEVICE_DTS_CONFIG := config@10
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
 endef
 
 define Device/p2w_r619ac-64m
 	$(call Device/p2w_r619ac)
 	DEVICE_VARIANT := 64M NAND
-	IMAGES += nand-factory.bin
-	IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += p2w_r619ac-64m
 
@@ -870,6 +945,18 @@ define Device/p2w_r619ac-128m
 endef
 TARGET_DEVICES += p2w_r619ac-128m
 
+define Device/pakedge_wr-1
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Pakedge
+	DEVICE_MODEL := WR-1
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 64k
+	IMAGE_SIZE := 31232k
+	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += pakedge_wr-1
+
 define Device/plasmacloud_pa1200
 	$(call Device/FitImageLzma)
 	DEVICE_VENDOR := Plasma Cloud
@@ -877,7 +964,7 @@ define Device/plasmacloud_pa1200
 	SOC := qcom-ipq4018
 	DEVICE_DTS_CONFIG := config@pc.pa1200
 	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15616k
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
@@ -892,7 +979,7 @@ define Device/plasmacloud_pa2200
 	SOC := qcom-ipq4019
 	DEVICE_DTS_CONFIG := config@pc.pa2200
 	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15552k
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
@@ -941,11 +1028,8 @@ define Device/qxwlan_e2600ac-c1
 	DEVICE_VARIANT := C1
 	BOARD_NAME := e2600ac-c1
 	SOC := qcom-ipq4019
-	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 31232k
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
-	DEFAULT := n
 endef
 TARGET_DEVICES += qxwlan_e2600ac-c1
 
@@ -959,10 +1043,21 @@ define Device/qxwlan_e2600ac-c2
 	KERNEL_INSTALL := 1
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
 endef
 TARGET_DEVICES += qxwlan_e2600ac-c2
 
+define Device/sony_ncp-hg100-cellular
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Sony
+	DEVICE_MODEL := NCP-HG100/Cellular
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 8192k
+	IMAGE_SIZE := 128m
+	DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
+endef
+TARGET_DEVICES += sony_ncp-hg100-cellular
+
 define Device/teltonika_rutx10
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
@@ -974,10 +1069,27 @@ define Device/teltonika_rutx10
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	FILESYSTEMS := squashfs
-	IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
-	DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
+	IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
+	DEVICE_PACKAGES := kmod-bluetooth
 endef
-TARGET_DEVICES += teltonika_rutx10
+# Missing DSA Setup
+#TARGET_DEVICES += teltonika_rutx10
+
+define Device/teltonika_rutx50
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Teltonika
+	DEVICE_MODEL := RUTX50
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@5
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+	IMAGE/factory.ubi := append-ubi
+	DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += teltonika_rutx50
 
 define Device/tel_x1pro
 	$(call Device/FitImage)
@@ -990,7 +1102,8 @@ define Device/tel_x1pro
 	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 	DEFAULT := n
 endef
-TARGET_DEVICES += tel_x1pro
+# Missing DSA Setup
+#TARGET_DEVICES += tel_x1pro
 
 define Device/unielec_u4019-32m
 	$(call Device/FitImage)
@@ -1004,12 +1117,38 @@ define Device/unielec_u4019-32m
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 	DEFAULT := n
 endef
-TARGET_DEVICES += unielec_u4019-32m
+# Missing DSA Setup
+#TARGET_DEVICES += unielec_u4019-32m
 
-define Device/zte_mf286d
+define Device/wallys_dr40x9
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Wallys
+	DEVICE_MODEL := DR40X9
+	SOC := qcom-ipq40x9
+	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
+endef
+TARGET_DEVICES += wallys_dr40x9
+
+define Device/zte_mf18a
+	$(call Device/FitImage)
+	DEVICE_VENDOR := ZTE
+	DEVICE_MODEL := MF18A
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_IN_UBI := 1
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += zte_mf18a
+
+define Device/zte_mf28x_common
 	$(call Device/FitzImage)
 	DEVICE_VENDOR := ZTE
-	DEVICE_MODEL := MF286D
 	SOC := qcom-ipq4019
 	DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
 	BLOCKSIZE := 128k
@@ -1017,8 +1156,38 @@ define Device/zte_mf286d
 	KERNEL_IN_UBI := 1
 	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 endef
+
+define Device/zte_mf286d
+	$(call Device/zte_mf28x_common)
+	DEVICE_MODEL := MF286D
+endef
 TARGET_DEVICES += zte_mf286d
 
+define Device/zte_mf287plus
+	$(call Device/zte_mf28x_common)
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	DEVICE_MODEL := MF287Plus
+	DEVICE_ALT0_VENDOR := ZTE
+	DEVICE_ALT0_MODEL := MF287
+	DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
+	SOC := qcom-ipq4018
+#	The recovery image is used to return back to stock (an initramfs-based image
+#	that can be flashed to the device via sysupgrade
+#	The factory image is used to install from the stock firmware by using an
+#	exploit for the web interface
+	IMAGES += factory.bin recovery.bin
+	IMAGE/factory.bin  := append-ubi
+	IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/openwrt-$$(BOARD)$$(if $$(SUBTARGET),-$$(SUBTARGET))-$$(DEVICE_NAME)-initramfs-zImage.itb rootfs=$$$$@ | append-metadata
+endef
+TARGET_DEVICES += zte_mf287plus
+
+define Device/zte_mf289f
+	$(call Device/zte_mf28x_common)
+	DEVICE_MODEL := MF289F
+	DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
+endef
+TARGET_DEVICES += zte_mf289f
+
 define Device/zyxel_nbg6617
 	$(call Device/FitImageLzma)
 	DEVICE_VENDOR := ZyXEL
@@ -1051,4 +1220,5 @@ define Device/zyxel_wre6606
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 endef
-TARGET_DEVICES += zyxel_wre6606
+# Missing DSA Setup
+#TARGET_DEVICES += zyxel_wre6606