X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fimage%2Fgeneric.mk;h=78fa22c2345a09ce1d5338bf310d59a1adfa9232;hb=bb4a25860f593790aaedc1b31dde33fbc519e7bf;hp=6cde091b2b51dfeaaa784fa41261eef6df0fec63;hpb=7f2ecab0f4623e9b437b1a6656275695ac063fe4;p=openwrt%2Fstaging%2Fjow.git

diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index 6cde091b2b..78fa22c234 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -305,8 +305,7 @@ define Device/buffalo_wtr-m2133hp
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += buffalo_wtr-m2133hp
+TARGET_DEVICES += buffalo_wtr-m2133hp
 
 define Device/cellc_rtl30vw
 	KERNEL_SUFFIX := -zImage.itb
@@ -757,26 +756,27 @@ define Device/luma_wrtq-329acn
 endef
 TARGET_DEVICES += luma_wrtq-329acn
 
-define Device/meraki_mr33
+define Device/meraki_common
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Cisco Meraki
-	DEVICE_MODEL := MR33
 	SOC := qcom-ipq4029
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
+	DEVICE_PACKAGES := ath10k-firmware-qca9887-ct
+endef
+
+define Device/meraki_mr33
+	$(call Device/meraki_common)
+	DEVICE_MODEL := MR33
+	DEFAULT := n
 endef
 TARGET_DEVICES += meraki_mr33
 
 define Device/meraki_mr74
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Cisco Meraki
+	$(call Device/meraki_common)
 	DEVICE_MODEL := MR74
-	SOC := qcom-ipq4029
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 	DEVICE_DTS_CONFIG := config@3
+	DEFAULT := n
 endef
 TARGET_DEVICES += meraki_mr74
 
@@ -1028,10 +1028,8 @@ define Device/qxwlan_e2600ac-c1
 	DEVICE_VARIANT := C1
 	BOARD_NAME := e2600ac-c1
 	SOC := qcom-ipq4019
-	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 31232k
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEFAULT := n
 endef
 TARGET_DEVICES += qxwlan_e2600ac-c1
 
@@ -1046,8 +1044,7 @@ define Device/qxwlan_e2600ac-c2
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += qxwlan_e2600ac-c2
+TARGET_DEVICES += qxwlan_e2600ac-c2
 
 define Device/sony_ncp-hg100-cellular
 	$(call Device/FitImage)
@@ -1078,6 +1075,22 @@ endef
 # Missing DSA Setup
 #TARGET_DEVICES += teltonika_rutx10
 
+define Device/teltonika_rutx50
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Teltonika
+	DEVICE_MODEL := RUTX50
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@5
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+	IMAGE/factory.ubi := append-ubi
+	DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += teltonika_rutx50
+
 define Device/tel_x1pro
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Telco
@@ -1150,10 +1163,28 @@ define Device/zte_mf286d
 endef
 TARGET_DEVICES += zte_mf286d
 
+define Device/zte_mf287plus
+	$(call Device/zte_mf28x_common)
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	DEVICE_MODEL := MF287Plus
+	DEVICE_ALT0_VENDOR := ZTE
+	DEVICE_ALT0_MODEL := MF287
+	DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
+	SOC := qcom-ipq4018
+#	The recovery image is used to return back to stock (an initramfs-based image
+#	that can be flashed to the device via sysupgrade
+#	The factory image is used to install from the stock firmware by using an
+#	exploit for the web interface
+	IMAGES += factory.bin recovery.bin
+	IMAGE/factory.bin  := append-ubi
+	IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/openwrt-$$(BOARD)$$(if $$(SUBTARGET),-$$(SUBTARGET))-$$(DEVICE_NAME)-initramfs-zImage.itb rootfs=$$$$@ | append-metadata
+endef
+TARGET_DEVICES += zte_mf287plus
+
 define Device/zte_mf289f
 	$(call Device/zte_mf28x_common)
 	DEVICE_MODEL := MF289F
-	DEVICE_PACKAGES += ath10k-firmware-qca9984-ct
+	DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
 endef
 TARGET_DEVICES += zte_mf289f