X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fimage%2Fgeneric.mk;h=78fa22c2345a09ce1d5338bf310d59a1adfa9232;hb=bb4a25860f593790aaedc1b31dde33fbc519e7bf;hp=a2807c6c9c530d2d9d7abe57ea5c3816d005de23;hpb=2a9f3b7717d081a9d6cb34d7ad04e14b4e50d69e;p=openwrt%2Fstaging%2Fjow.git

diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index a2807c6c9c..78fa22c234 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -186,10 +186,9 @@ TARGET_DEVICES += aruba_ap-303h
 define Device/aruba_ap-365
 	$(call Device/aruba_glenmorangie)
 	DEVICE_MODEL := AP-365
-	DEVICE_PACKAGES := kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
+	DEVICE_PACKAGES := kmod-hwmon-ad7418
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += aruba_ap-365
+TARGET_DEVICES += aruba_ap-365
 
 define Device/asus_map-ac2200
 	$(call Device/FitImageLzma)
@@ -274,7 +273,7 @@ define Device/avm_fritzbox-7530
 	DEVICE_ALT0_VENDOR := AVM
 	DEVICE_ALT0_MODEL := FRITZ!Box 7520
 	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
 endef
 TARGET_DEVICES += avm_fritzbox-7530
 
@@ -294,8 +293,7 @@ define Device/avm_fritzrepeater-3000
 	SOC := qcom-ipq4019
 	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += avm_fritzrepeater-3000
+TARGET_DEVICES += avm_fritzrepeater-3000
 
 define Device/buffalo_wtr-m2133hp
 	$(call Device/FitImage)
@@ -307,8 +305,7 @@ define Device/buffalo_wtr-m2133hp
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += buffalo_wtr-m2133hp
+TARGET_DEVICES += buffalo_wtr-m2133hp
 
 define Device/cellc_rtl30vw
 	KERNEL_SUFFIX := -zImage.itb
@@ -336,7 +333,7 @@ define Device/cilab_meshpoint-one
 	$(call Device/8dev_jalapeno-common)
 	DEVICE_VENDOR := Crisis Innovation Lab
 	DEVICE_MODEL := MeshPoint.One
-	DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
+	DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 endef
 # Missing DSA Setup
 #TARGET_DEVICES += cilab_meshpoint-one
@@ -388,7 +385,6 @@ define Device/devolo_magic-2-wifi-next
 	IMAGE_SIZE := 26624k
 	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 	DEFAULT := n
 endef
 # Missing DSA Setup
@@ -443,7 +439,7 @@ define Device/edgecore_oap100
 	PAGESIZE := 2048
 	IMAGES := sysupgrade.bin
 	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
-	DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
+	DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 endef
 # Missing DSA Setup
 #TARGET_DEVICES += edgecore_oap100
@@ -540,10 +536,8 @@ define Device/extreme-networks_ws-ap3915i
 	SOC := qcom-ipq4029
 	BLOCKSIZE := 128k
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += extreme-networks_ws-ap3915i
+TARGET_DEVICES += extreme-networks_ws-ap3915i
 
 define Device/ezviz_cs-w3-wd1200g-eup
 	$(call Device/FitImage)
@@ -560,8 +554,7 @@ define Device/ezviz_cs-w3-wd1200g-eup
 	DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 		Upgrade via sysupgrade mechanism is not possible.
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
+TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 
 define Device/glinet_gl-a1300
 	$(call Device/FitImage)
@@ -573,7 +566,6 @@ define Device/glinet_gl-a1300
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	IMAGE_SIZE := 131072k
-	DEVICE_PACKAGE := ipq-wifi-glinet_gl-a1300
 endef
 TARGET_DEVICES += glinet_gl-a1300
 
@@ -588,10 +580,9 @@ define Device/glinet_gl-ap1300
 	PAGESIZE := 2048
 	IMAGE_SIZE := 131072k
 	KERNEL_INSTALL := 1
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += glinet_gl-ap1300
+TARGET_DEVICES += glinet_gl-ap1300
 
 define Device/glinet_gl-b1300
 	$(call Device/FitzImage)
@@ -632,7 +623,7 @@ define Device/glinet_gl-s1300
 	IMAGE_SIZE := 26624k
 	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
+	DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
 endef
 # Missing DSA Setup
 #TARGET_DEVICES += glinet_gl-s1300
@@ -699,7 +690,7 @@ define Device/linksys_ea8300
 	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 	IMAGES += factory.bin
 	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += linksys_ea8300
 
@@ -720,6 +711,23 @@ define Device/linksys_mr8300
 endef
 TARGET_DEVICES += linksys_mr8300
 
+define Device/linksys_whw03v2
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := WHW03
+	DEVICE_VARIANT := V2
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 6144k
+	IMAGE_SIZE := 158720k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
+endef
+TARGET_DEVICES += linksys_whw03v2
+
 define Device/linksys_whw01
 	$(call Device/FitzImage)
 	DEVICE_VENDOR := Linksys
@@ -734,8 +742,7 @@ define Device/linksys_whw01
 	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
 	DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += linksys_whw01
+TARGET_DEVICES += linksys_whw01
 
 define Device/luma_wrtq-329acn
 	$(call Device/FitImage)
@@ -749,26 +756,27 @@ define Device/luma_wrtq-329acn
 endef
 TARGET_DEVICES += luma_wrtq-329acn
 
-define Device/meraki_mr33
+define Device/meraki_common
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Cisco Meraki
-	DEVICE_MODEL := MR33
 	SOC := qcom-ipq4029
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
+	DEVICE_PACKAGES := ath10k-firmware-qca9887-ct
+endef
+
+define Device/meraki_mr33
+	$(call Device/meraki_common)
+	DEVICE_MODEL := MR33
+	DEFAULT := n
 endef
 TARGET_DEVICES += meraki_mr33
 
 define Device/meraki_mr74
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Cisco Meraki
+	$(call Device/meraki_common)
 	DEVICE_MODEL := MR74
-	SOC := qcom-ipq4029
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 	DEVICE_DTS_CONFIG := config@3
+	DEFAULT := n
 endef
 TARGET_DEVICES += meraki_mr74
 
@@ -799,16 +807,14 @@ define Device/netgear_ex6100v2
 	DEVICE_MODEL := EX6100
 	DEVICE_VARIANT := v2
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += netgear_ex6100v2
+TARGET_DEVICES += netgear_ex6100v2
 
 define Device/netgear_ex6150v2
 	$(call Device/netgear_ex61x0v2)
 	DEVICE_MODEL := EX6150
 	DEVICE_VARIANT := v2
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += netgear_ex6150v2
+TARGET_DEVICES += netgear_ex6150v2
 
 define Device/netgear_orbi
 	$(call Device/DniImage)
@@ -923,7 +929,6 @@ define Device/p2w_r619ac
 	DEVICE_DTS_CONFIG := config@10
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
 endef
 
 define Device/p2w_r619ac-64m
@@ -945,7 +950,6 @@ define Device/pakedge_wr-1
 	DEVICE_VENDOR := Pakedge
 	DEVICE_MODEL := WR-1
 	DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
-	DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
 	SOC := qcom-ipq4018
 	BLOCKSIZE := 64k
 	IMAGE_SIZE := 31232k
@@ -1024,14 +1028,10 @@ define Device/qxwlan_e2600ac-c1
 	DEVICE_VARIANT := C1
 	BOARD_NAME := e2600ac-c1
 	SOC := qcom-ipq4019
-	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 31232k
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
-	DEFAULT := n
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += qxwlan_e2600ac-c1
+TARGET_DEVICES += qxwlan_e2600ac-c1
 
 define Device/qxwlan_e2600ac-c2
 	$(call Device/FitImage)
@@ -1043,10 +1043,8 @@ define Device/qxwlan_e2600ac-c2
 	KERNEL_INSTALL := 1
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += qxwlan_e2600ac-c2
+TARGET_DEVICES += qxwlan_e2600ac-c2
 
 define Device/sony_ncp-hg100-cellular
 	$(call Device/FitImage)
@@ -1056,8 +1054,7 @@ define Device/sony_ncp-hg100-cellular
 	SOC := qcom-ipq4019
 	KERNEL_SIZE := 8192k
 	IMAGE_SIZE := 128m
-	DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
-		kmod-fs-ext4 uqmi
+	DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
 endef
 TARGET_DEVICES += sony_ncp-hg100-cellular
 
@@ -1073,11 +1070,27 @@ define Device/teltonika_rutx10
 	PAGESIZE := 2048
 	FILESYSTEMS := squashfs
 	IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
-	DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
+	DEVICE_PACKAGES := kmod-bluetooth
 endef
 # Missing DSA Setup
 #TARGET_DEVICES += teltonika_rutx10
 
+define Device/teltonika_rutx50
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Teltonika
+	DEVICE_MODEL := RUTX50
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@5
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+	IMAGE/factory.ubi := append-ubi
+	DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += teltonika_rutx50
+
 define Device/tel_x1pro
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Telco
@@ -1107,6 +1120,32 @@ endef
 # Missing DSA Setup
 #TARGET_DEVICES += unielec_u4019-32m
 
+define Device/wallys_dr40x9
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Wallys
+	DEVICE_MODEL := DR40X9
+	SOC := qcom-ipq40x9
+	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
+endef
+TARGET_DEVICES += wallys_dr40x9
+
+define Device/zte_mf18a
+	$(call Device/FitImage)
+	DEVICE_VENDOR := ZTE
+	DEVICE_MODEL := MF18A
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_IN_UBI := 1
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += zte_mf18a
+
 define Device/zte_mf28x_common
 	$(call Device/FitzImage)
 	DEVICE_VENDOR := ZTE
@@ -1124,6 +1163,24 @@ define Device/zte_mf286d
 endef
 TARGET_DEVICES += zte_mf286d
 
+define Device/zte_mf287plus
+	$(call Device/zte_mf28x_common)
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	DEVICE_MODEL := MF287Plus
+	DEVICE_ALT0_VENDOR := ZTE
+	DEVICE_ALT0_MODEL := MF287
+	DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
+	SOC := qcom-ipq4018
+#	The recovery image is used to return back to stock (an initramfs-based image
+#	that can be flashed to the device via sysupgrade
+#	The factory image is used to install from the stock firmware by using an
+#	exploit for the web interface
+	IMAGES += factory.bin recovery.bin
+	IMAGE/factory.bin  := append-ubi
+	IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/openwrt-$$(BOARD)$$(if $$(SUBTARGET),-$$(SUBTARGET))-$$(DEVICE_NAME)-initramfs-zImage.itb rootfs=$$$$@ | append-metadata
+endef
+TARGET_DEVICES += zte_mf287plus
+
 define Device/zte_mf289f
 	$(call Device/zte_mf28x_common)
 	DEVICE_MODEL := MF289F