X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fimage%2Fgeneric.mk;h=b4719033c0a54e8531207967286984359fdf1786;hb=b16e14a220fcab19e3145328057e7188f00b6a17;hp=57eaef07bbafdd09fae6f927961f8dc5c6e1b619;hpb=ae7c2bb61b94681171e1c7dff403a349033fa9f0;p=openwrt%2Fstaging%2Fhauke.git

diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index 57eaef07bb..b4719033c0 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -4,28 +4,28 @@ DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
 
 define Device/FitImage
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_SUFFIX := -uImage.itb
+	KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 	KERNEL_NAME := Image
 endef
 
 define Device/FitImageLzma
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_SUFFIX := -uImage.itb
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
 	KERNEL_NAME := Image
 endef
 
 define Device/FitzImage
-	KERNEL_SUFFIX := -fit-zImage.itb
-	KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_SUFFIX := -zImage.itb
+	KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
 	KERNEL_NAME := zImage
 endef
 
 define Device/UbiFit
 	KERNEL_IN_UBI := 1
-	IMAGES := nand-factory.ubi nand-sysupgrade.bin
-	IMAGE/nand-factory.ubi := append-ubi
-	IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
+	IMAGES := factory.ubi sysupgrade.bin
+	IMAGE/factory.ubi := append-ubi
+	IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 endef
 
 define Device/DniImage
@@ -43,7 +43,23 @@ define Build/append-rootfshdr
 		-O linux -T filesystem \
 		-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
 		-n root.squashfs -d $(IMAGE_ROOTFS) $@.new
-	dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
+	cat $(IMAGE_KERNEL) > $@.$1
+	dd if=$@.new bs=64 count=1 >> $@.$1
+endef
+
+define Build/append-rutx-metadata
+	echo \
+		'{ \
+			"device_code": [".*"], \
+			"hwver": [".*"], \
+			"batch": [".*"], \
+			"serial": [".*"], \
+			"supported_devices":["teltonika,rutx"] \
+		}' | fwtool -I - $@
+endef
+
+define Build/copy-file
+	cat "$(1)" > "$@"
 endef
 
 define Build/mkmylofw_32m
@@ -52,7 +68,7 @@ define Build/mkmylofw_32m
 
 	let \
 		size="$$(stat -c%s $@)" \
-		pad="$(subst k,* 1024,$(BLOCKSIZE))" \
+		pad="$(call exp_units,$(BLOCKSIZE))" \
 		pad="(pad - (size % pad)) % pad" \
 		newsize='size + pad'; \
 		$(STAGING_DIR_HOST)/bin/mkmylofw \
@@ -74,13 +90,23 @@ endef
 
 define Build/qsdk-ipq-factory-nand-askey
 	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
-		askey_kernel $(IMAGE_KERNEL) \
+		askey_kernel $@.$1 \
 		askey_fs $(IMAGE_ROOTFS) \
 		ubifs $@
 	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
 	@mv $@.new $@
 endef
 
+define Build/qsdk-ipq-app-gpt
+	cp $@ $@.tmp 2>/dev/null || true
+	ptgen -g -o $@.tmp -a 1 -l 1024 \
+			-t 0x2e -N 0:HLOS -r -p 32M \
+			-t 0x83 -N rootfs -r -p 128M \
+				-N rootfs_data -p 512M
+	cat $@.tmp >> $@
+	rm $@.tmp
+endef
+
 define Build/SenaoFW
 	-$(STAGING_DIR_HOST)/bin/mksenaofw \
 		-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
@@ -105,7 +131,6 @@ define Device/8dev_habanero-dvk
 	DEVICE_MODEL := Habanero DVK
 	IMAGE_SIZE := 30976k
 	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
 	IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 endef
 TARGET_DEVICES += 8dev_habanero-dvk
@@ -135,8 +160,8 @@ define Device/alfa-network_ap120c-ac
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	IMAGE_SIZE := 65536k
-	IMAGES := nand-factory.bin nand-sysupgrade.bin
-	IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+	IMAGES := factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += alfa-network_ap120c-ac
 
@@ -144,7 +169,6 @@ define Device/aruba_glenmorangie
 	$(call Device/FitImageLzma)
 	DEVICE_VENDOR := Aruba
 	SOC := qcom-ipq4029
-	DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
 endef
 
 define Device/aruba_ap-303
@@ -162,7 +186,7 @@ TARGET_DEVICES += aruba_ap-303h
 define Device/aruba_ap-365
 	$(call Device/aruba_glenmorangie)
 	DEVICE_MODEL := AP-365
-	DEVICE_PACKAGES += kmod-hwmon-ad7418
+	DEVICE_PACKAGES := kmod-hwmon-ad7418
 endef
 TARGET_DEVICES += aruba_ap-365
 
@@ -175,14 +199,44 @@ define Device/asus_map-ac2200
 endef
 TARGET_DEVICES += asus_map-ac2200
 
+# WARNING: this is an initramfs image that gets you half of the way there
+#          you need to delete the jffs2 ubi volume and sysupgrade to the final image
+# to get a "trx" you can flash via web UI for ac42u/ac58u:
+# - change call Device/FitImageLzma to Device/FitImage
+# - add the following below UIMAGE_NAME
+#   UIMAGE_MAGIC := 0x27051956
+#   IMAGES += factory.trx
+#   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
+define Device/asus_rt-ac42u
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ASUS
+	DEVICE_MODEL := RT-AC42U
+	DEVICE_ALT0_VENDOR := ASUS
+	DEVICE_ALT0_MODEL := RT-ACRH17
+	DEVICE_ALT1_VENDOR := ASUS
+	DEVICE_ALT1_MODEL := RT-AC2200
+	SOC := qcom-ipq4019
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 20439364
+	FILESYSTEMS := squashfs
+#	RT-AC82U is nowhere to be found online
+#	Rather, this device is a/k/a RT-AC42U
+#	But we'll go with what the vendor firmware has...
+	UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ac42u
+
 define Device/asus_rt-ac58u
 	$(call Device/FitImageLzma)
 	DEVICE_VENDOR := ASUS
 	DEVICE_MODEL := RT-AC58U
+	DEVICE_ALT0_VENDOR := ASUS
+	DEVICE_ALT0_MODEL := RT-ACRH13
 	SOC := qcom-ipq4018
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DTB_SIZE := 65536
 	IMAGE_SIZE := 20439364
 	FILESYSTEMS := squashfs
 #	Someone - in their infinite wisdom - decided to put the firmware
@@ -216,8 +270,10 @@ define Device/avm_fritzbox-7530
 	$(call Device/FitImageLzma)
 	DEVICE_VENDOR := AVM
 	DEVICE_MODEL := FRITZ!Box 7530
+	DEVICE_ALT0_VENDOR := AVM
+	DEVICE_ALT0_MODEL := FRITZ!Box 7520
 	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
 endef
 TARGET_DEVICES += avm_fritzbox-7530
 
@@ -226,7 +282,7 @@ define Device/avm_fritzrepeater-1200
 	DEVICE_VENDOR := AVM
 	DEVICE_MODEL := FRITZ!Repeater 1200
 	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 endef
 TARGET_DEVICES += avm_fritzrepeater-1200
 
@@ -245,21 +301,21 @@ define Device/buffalo_wtr-m2133hp
 	DEVICE_VENDOR := Buffalo
 	DEVICE_MODEL := WTR-M2133HP
 	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 endef
 TARGET_DEVICES += buffalo_wtr-m2133hp
 
 define Device/cellc_rtl30vw
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
-	KERNEL_NAME := Image
+	KERNEL_SUFFIX := -zImage.itb
+	KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+	KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
+	KERNEL_NAME := zImage
 	KERNEL_IN_UBI :=
-	IMAGES := nand-factory.bin nand-sysupgrade.bin
-	IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
-	IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
+	IMAGES := factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
+	IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 	DEVICE_VENDOR := Cell C
 	DEVICE_MODEL := RTL30VW
 	SOC := qcom-ipq4019
@@ -269,8 +325,7 @@ define Device/cellc_rtl30vw
 	IMAGE_SIZE := 57344k
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
-	DEFAULT := n
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 endef
 TARGET_DEVICES += cellc_rtl30vw
 
@@ -278,9 +333,10 @@ define Device/cilab_meshpoint-one
 	$(call Device/8dev_jalapeno-common)
 	DEVICE_VENDOR := Crisis Innovation Lab
 	DEVICE_MODEL := MeshPoint.One
-	DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
+	DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 endef
-TARGET_DEVICES += cilab_meshpoint-one
+# Missing DSA Setup
+#TARGET_DEVICES += cilab_meshpoint-one
 
 define Device/compex_wpj419
 	$(call Device/FitImage)
@@ -294,10 +350,11 @@ define Device/compex_wpj419
 	PAGESIZE := 2048
 	FILESYSTEMS := squashfs
 endef
-TARGET_DEVICES += compex_wpj419
+# Missing DSA Setup
+#TARGET_DEVICES += compex_wpj419
 
 define Device/compex_wpj428
-	$(call Device/FitImage)
+	$(call Device/FitzImage)
 	DEVICE_VENDOR := Compex
 	DEVICE_MODEL := WPJ428
 	SOC := qcom-ipq4028
@@ -314,7 +371,7 @@ endef
 TARGET_DEVICES += compex_wpj428
 
 define Device/devolo_magic-2-wifi-next
-	$(call Device/FitImage)
+	$(call Device/FitzImage)
 	DEVICE_VENDOR := devolo
 	DEVICE_MODEL := Magic 2 WiFi next
 	SOC := qcom-ipq4018
@@ -322,13 +379,12 @@ define Device/devolo_magic-2-wifi-next
 
 	# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 	# it will bootm it, just like we want for the initramfs.
-	KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
+	KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 		append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 
 	IMAGE_SIZE := 26624k
 	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 	DEFAULT := n
 endef
 TARGET_DEVICES += devolo_magic-2-wifi-next
@@ -356,7 +412,6 @@ define Device/dlink_dap-2610
 	# append-rootfs must start on an erase block boundary.
 	IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 	IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
 endef
 TARGET_DEVICES += dlink_dap-2610
 
@@ -381,11 +436,12 @@ define Device/edgecore_oap100
 	SOC := qcom-ipq4019
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	IMAGES := nand-sysupgrade.bin
+	IMAGES := sysupgrade.bin
 	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
-	DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
+	DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 endef
-TARGET_DEVICES += edgecore_oap100
+# Missing DSA Setup
+#TARGET_DEVICES += edgecore_oap100
 
 define Device/engenius_eap1300
 	$(call Device/FitImage)
@@ -398,7 +454,8 @@ define Device/engenius_eap1300
 	IMAGE_SIZE := 25344k
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 endef
-TARGET_DEVICES += engenius_eap1300
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap1300
 
 define Device/engenius_eap2200
 	$(call Device/FitImage)
@@ -408,9 +465,10 @@ define Device/engenius_eap2200
 	SOC := qcom-ipq4019
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 endef
-TARGET_DEVICES += engenius_eap2200
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap2200
 
 define Device/engenius_emd1
 	$(call Device/FitImage)
@@ -422,9 +480,9 @@ define Device/engenius_emd1
 	IMAGES += factory.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
-	DEVICE_PACKAGES := ipq-wifi-engenius_emd1
 endef
-TARGET_DEVICES += engenius_emd1
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emd1
 
 define Device/engenius_emr3500
 	$(call Device/FitImage)
@@ -437,10 +495,10 @@ define Device/engenius_emr3500
 	IMAGES += factory.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
-	DEVICE_PACKAGES := ipq-wifi-engenius_emr3500
 	DEFAULT := n
 endef
-TARGET_DEVICES += engenius_emr3500
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emr3500
 
 define Device/engenius_ens620ext
 	$(call Device/FitImage)
@@ -466,23 +524,60 @@ define Device/engenius_ens620ext
 	IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 	IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 endef
-TARGET_DEVICES += engenius_ens620ext
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_ens620ext
+
+define Device/extreme-networks_ws-ap3915i
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Extreme Networks
+	DEVICE_MODEL := WS-AP3915i
+	IMAGE_SIZE := 30080k
+	SOC := qcom-ipq4029
+	BLOCKSIZE := 128k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += extreme-networks_ws-ap3915i
+
+define Device/extreme-networks_ws-ap391x
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Extreme Networks
+	DEVICE_MODEL := WS-AP391x
+	IMAGE_SIZE := 15040k
+	SOC := qcom-ipq4029
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += extreme-networks_ws-ap391x
 
 define Device/ezviz_cs-w3-wd1200g-eup
 	$(call Device/FitImage)
 	DEVICE_VENDOR := EZVIZ
 	DEVICE_MODEL := CS-W3-WD1200G
 	DEVICE_VARIANT := EUP
-	DEVICE_DTS_CONFIG := config@4
 	IMAGE_SIZE := 14848k
+	KERNEL_SIZE = 6m
 	SOC := qcom-ipq4018
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 		append-metadata
-	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
-		ipq-wifi-ezviz_cs-w3-wd1200g-eup
+	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+	DEVICE_COMPAT_VERSION := 2.0
+	DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
+		Upgrade via sysupgrade mechanism is not possible.
 endef
 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 
+define Device/glinet_gl-a1300
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-A1300
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 131072k
+endef
+TARGET_DEVICES += glinet_gl-a1300
+
 define Device/glinet_gl-ap1300
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
@@ -494,7 +589,7 @@ define Device/glinet_gl-ap1300
 	PAGESIZE := 2048
 	IMAGE_SIZE := 131072k
 	KERNEL_INSTALL := 1
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 endef
 TARGET_DEVICES += glinet_gl-ap1300
 
@@ -510,6 +605,24 @@ define Device/glinet_gl-b1300
 endef
 TARGET_DEVICES += glinet_gl-b1300
 
+define Device/glinet_gl-b2200
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-B2200
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
+	KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+	IMAGES := emmc.img.gz sysupgrade.bin
+	IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
+		pad-to 1024k | append-kernel |\
+		pad-to 33792k | append-rootfs |\
+		append-metadata | gzip
+	IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
+		kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
+endef
+TARGET_DEVICES += glinet_gl-b2200
+
 define Device/glinet_gl-s1300
 	$(call Device/FitzImage)
 	DEVICE_VENDOR := GL.iNet
@@ -519,9 +632,21 @@ define Device/glinet_gl-s1300
 	IMAGE_SIZE := 26624k
 	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
+	DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += glinet_gl-s1300
+
+define Device/kernel-size-6350-8300
+	DEVICE_COMPAT_VERSION := 2.0
+	DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
+	this OpenWrt version. Before continuing, you MUST issue either the \
+	command "fw_setenv kernsize 500000" from the OpenWrt command line, \
+	or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
+	Instead of the sysupgrade image, you must then install the OpenWrt \
+	factory image, setting the force flag and wiping the configuration. \
+	(e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
 endef
-TARGET_DEVICES += glinet_gl-s1300
 
 define Device/linksys_ea6350v3
 	# The Linksys EA6350v3 has a uboot bootloader that does not
@@ -529,30 +654,32 @@ define Device/linksys_ea6350v3
 	# partitions. This uboot, however, supports raw kernel images and
 	# gzipped images.
 	#
-	# As for the time of writing this, the device will boot the kernel
-	# from a fixed address with a fixed length of 3MiB. Also, the
-	# device has a hard-coded kernel command line that requieres the
+	# As configured by the OEM factory, the device will boot the kernel
+	# from a fixed address with a fixed length of 3 MiB. Also, the
+	# device has a hard-coded kernel command line that requires the
 	# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 	# Oh... and the kernel partition overlaps with the rootfs
 	# partition (the same for alt_kernel and alt_rootfs).
 	#
 	# If you are planing re-partitioning the device, you may want to
-	# keep those details in mind:
-	# 1. The kernel adresses you should honor are 0x00000000 and
+	# keep these details in mind:
+	# 1. The kernel addresses you should honor are 0x00000000 and
 	#    0x02800000 respectively.
-	# 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
+	# 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
+	#    unless the uboot environment variable "kernsize" is increased.
 	# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 	# 4. The kernel command line from uboot is harcoded to boot with
 	#    rootfs either in mtd11 or mtd13.
 	$(call Device/FitzImage)
+	$(call Device/kernel-size-6350-8300)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := EA6350
 	DEVICE_VARIANT := v3
 	SOC := qcom-ipq4018
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 37888k
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 35840k
 	UBINIZE_OPTS := -E 5
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
@@ -561,59 +688,106 @@ TARGET_DEVICES += linksys_ea6350v3
 
 define Device/linksys_ea8300
 	$(call Device/FitzImage)
+	$(call Device/kernel-size-6350-8300)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := EA8300
 	SOC := qcom-ipq4019
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 87040k
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 84992k
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 	IMAGES += factory.bin
 	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += linksys_ea8300
 
 define Device/linksys_mr8300
 	$(call Device/FitzImage)
+	$(call Device/kernel-size-6350-8300)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := MR8300
 	SOC := qcom-ipq4019
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 87040k
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 84992k
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 	IMAGES += factory.bin
 	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += linksys_mr8300
 
+define Device/linksys_whw03v2
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := WHW03
+	DEVICE_VARIANT := V2
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 6144k
+	IMAGE_SIZE := 158720k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
+endef
+TARGET_DEVICES += linksys_whw03v2
+
+define Device/linksys_whw01
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := WHW01
+	KERNEL_SIZE := 6144k
+	IMAGE_SIZE := 75776k
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
+	DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
+endef
+TARGET_DEVICES += linksys_whw01
+
 define Device/luma_wrtq-329acn
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Luma Home
 	DEVICE_MODEL := WRTQ-329ACN
 	SOC := qcom-ipq4018
-	DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
+	DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 	IMAGE_SIZE := 76632k
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 endef
 TARGET_DEVICES += luma_wrtq-329acn
 
-define Device/meraki_mr33
+define Device/meraki_common
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Cisco Meraki
-	DEVICE_MODEL := MR33
 	SOC := qcom-ipq4029
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
+	DEVICE_DTS_LOADADDR := 0x89000000
+	DEVICE_PACKAGES := ath10k-firmware-qca9887-ct
+endef
+
+define Device/meraki_mr33
+	$(call Device/meraki_common)
+	DEVICE_MODEL := MR33
 endef
 TARGET_DEVICES += meraki_mr33
 
+define Device/meraki_mr74
+	$(call Device/meraki_common)
+	DEVICE_MODEL := MR74
+	DEVICE_DTS_CONFIG := config@3
+endef
+TARGET_DEVICES += meraki_mr74
+
 define Device/mobipromo_cm520-79f
 	$(call Device/FitzImage)
 	$(call Device/UbiFit)
@@ -622,7 +796,7 @@ define Device/mobipromo_cm520-79f
 	SOC := qcom-ipq4019
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
+	DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += mobipromo_cm520-79f
 
@@ -662,6 +836,30 @@ define Device/netgear_orbi
 	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 endef
 
+define Device/netgear_rbx40
+	$(call Device/netgear_orbi)
+	NETGEAR_HW_ID := 29765515+0+4096+512+2x2+2x2+2x2
+	KERNEL_SIZE := 3932160
+	ROOTFS_SIZE := 32243712
+	IMAGE_SIZE := 36175872
+endef
+
+define Device/netgear_rbr40
+	$(call Device/netgear_rbx40)
+	DEVICE_MODEL := RBR40
+	DEVICE_VARIANT := v1
+	NETGEAR_BOARD_ID := RBR40
+endef
+TARGET_DEVICES += netgear_rbr40
+
+define Device/netgear_rbs40
+	$(call Device/netgear_rbx40)
+	DEVICE_MODEL := RBS40
+	DEVICE_VARIANT := v1
+	NETGEAR_BOARD_ID := RBS40
+endef
+TARGET_DEVICES += netgear_rbs40
+
 define Device/netgear_rbx50
 	$(call Device/netgear_orbi)
 	NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
@@ -717,8 +915,8 @@ define Device/netgear_wac510
 	DEVICE_DTS_CONFIG := config@5
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	IMAGES += nand-factory.tar
-	IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
+	IMAGES += factory.tar
+	IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
 	DEVICE_PACKAGES := uboot-envtools
 endef
 TARGET_DEVICES += netgear_wac510
@@ -730,7 +928,7 @@ define Device/openmesh_a42
 	SOC := qcom-ipq4018
 	DEVICE_DTS_CONFIG := config@om.a42
 	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15616k
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
@@ -745,7 +943,7 @@ define Device/openmesh_a62
 	SOC := qcom-ipq4019
 	DEVICE_DTS_CONFIG := config@om.a62
 	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15552k
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
@@ -754,6 +952,43 @@ define Device/openmesh_a62
 endef
 TARGET_DEVICES += openmesh_a62
 
+define Device/p2w_r619ac
+	$(call Device/FitzImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := P&W
+	DEVICE_MODEL := R619AC
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@10
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+endef
+
+define Device/p2w_r619ac-64m
+	$(call Device/p2w_r619ac)
+	DEVICE_VARIANT := 64M NAND
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += p2w_r619ac-64m
+
+define Device/p2w_r619ac-128m
+	$(call Device/p2w_r619ac)
+	DEVICE_VARIANT := 128M NAND
+endef
+TARGET_DEVICES += p2w_r619ac-128m
+
+define Device/pakedge_wr-1
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Pakedge
+	DEVICE_MODEL := WR-1
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 64k
+	IMAGE_SIZE := 31232k
+	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += pakedge_wr-1
+
 define Device/plasmacloud_pa1200
 	$(call Device/FitImageLzma)
 	DEVICE_VENDOR := Plasma Cloud
@@ -761,12 +996,11 @@ define Device/plasmacloud_pa1200
 	SOC := qcom-ipq4018
 	DEVICE_DTS_CONFIG := config@pc.pa1200
 	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15616k
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-plasmacloud_pa1200
 endef
 TARGET_DEVICES += plasmacloud_pa1200
 
@@ -777,48 +1011,15 @@ define Device/plasmacloud_pa2200
 	SOC := qcom-ipq4019
 	DEVICE_DTS_CONFIG := config@pc.pa2200
 	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15552k
 	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud_pa2200
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 endef
 TARGET_DEVICES += plasmacloud_pa2200
 
-define Device/qcom_ap-dk01.1-c1
-	DEVICE_VENDOR := Qualcomm Atheros
-	DEVICE_MODEL := AP-DK01.1
-	DEVICE_VARIANT := C1
-	BOARD_NAME := ap-dk01.1-c1
-	SOC := qcom-ipq4019
-	DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
-	KERNEL_INSTALL := 1
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 26624k
-	$(call Device/FitImage)
-	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
-	DEFAULT := n
-endef
-TARGET_DEVICES += qcom_ap-dk01.1-c1
-
-define Device/qcom_ap-dk04.1-c1
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Qualcomm Atheros
-	DEVICE_MODEL := AP-DK04.1
-	DEVICE_VARIANT := C1
-	SOC := qcom-ipq4019
-	DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
-	KERNEL_INSTALL := 1
-	KERNEL_SIZE := 4048k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := ap-dk04.1-c1
-	DEFAULT := n
-endef
-TARGET_DEVICES += qcom_ap-dk04.1-c1
-
 define Device/qxwlan_e2600ac-c1
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Qxwlan
@@ -826,11 +1027,8 @@ define Device/qxwlan_e2600ac-c1
 	DEVICE_VARIANT := C1
 	BOARD_NAME := e2600ac-c1
 	SOC := qcom-ipq4019
-	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 31232k
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
-	DEFAULT := n
 endef
 TARGET_DEVICES += qxwlan_e2600ac-c1
 
@@ -844,10 +1042,68 @@ define Device/qxwlan_e2600ac-c2
 	KERNEL_INSTALL := 1
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 endef
 TARGET_DEVICES += qxwlan_e2600ac-c2
 
+define Device/sony_ncp-hg100-cellular
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Sony
+	DEVICE_MODEL := NCP-HG100/Cellular
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 8192k
+	IMAGE_SIZE := 128m
+	DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
+endef
+TARGET_DEVICES += sony_ncp-hg100-cellular
+
+define Device/teltonika_rutx10
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Teltonika
+	DEVICE_MODEL := RUTX10
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@5
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+	IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
+	DEVICE_PACKAGES := kmod-bluetooth
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += teltonika_rutx10
+
+define Device/teltonika_rutx50
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Teltonika
+	DEVICE_MODEL := RUTX50
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@5
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+	IMAGE/factory.ubi := append-ubi
+	DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += teltonika_rutx50
+
+define Device/tel_x1pro
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Telco
+	DEVICE_MODEL := X1 Pro
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 31232k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+	DEFAULT := n
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += tel_x1pro
+
 define Device/unielec_u4019-32m
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Unielec
@@ -860,7 +1116,122 @@ define Device/unielec_u4019-32m
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 	DEFAULT := n
 endef
-TARGET_DEVICES += unielec_u4019-32m
+# Missing DSA Setup
+#TARGET_DEVICES += unielec_u4019-32m
+
+define Device/wallys_dr40x9
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Wallys
+	DEVICE_MODEL := DR40X9
+	SOC := qcom-ipq40x9
+	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
+endef
+TARGET_DEVICES += wallys_dr40x9
+
+define Device/yyets_le1
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := YYeTs
+	DEVICE_MODEL := LE1
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 31232k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := ipq-wifi-yyets_le1 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += yyets_le1
+
+define Device/zte_mf18a
+	$(call Device/FitImage)
+	DEVICE_VENDOR := ZTE
+	DEVICE_MODEL := MF18A
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_IN_UBI := 1
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += zte_mf18a
+
+define Device/zte_mf28x_common
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := ZTE
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_IN_UBI := 1
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+
+define Device/zte_mf282plus
+	$(call Device/zte_mf28x_common)
+	DEVICE_MODEL := MF282Plus
+#	The recovery image is used to return back to stock (an initramfs-based image
+#	that can be flashed to the device via sysupgrade
+#	The factory image is used to install from the stock firmware by using an
+#	exploit for the web interface
+	IMAGES += factory.bin recovery.bin
+	IMAGE/factory.bin  := append-ubi
+	IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net-rndis
+endef
+TARGET_DEVICES += zte_mf282plus
+
+define Device/zte_mf286d
+	$(call Device/zte_mf28x_common)
+	DEVICE_MODEL := MF286D
+endef
+TARGET_DEVICES += zte_mf286d
+
+define Device/zte_mf287_common
+	$(call Device/zte_mf28x_common)
+	SOC := qcom-ipq4018
+#	The recovery image is used to return back to stock (an initramfs-based image
+#	that can be flashed to the device via sysupgrade
+#	The factory image is used to install from the stock firmware by using an
+#	exploit for the web interface
+	IMAGES += factory.bin recovery.bin
+	IMAGE/factory.bin  := append-ubi
+	IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) rootfs=$$$$@ | append-metadata
+endef
+
+define Device/zte_mf287plus
+	$(call Device/zte_mf287_common)
+	DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	DEVICE_MODEL := MF287Plus
+endef
+TARGET_DEVICES += zte_mf287plus
+
+define Device/zte_mf287
+	$(call Device/zte_mf287_common)
+	DEVICE_PACKAGES += ipq-wifi-zte_mf287
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	DEVICE_MODEL := MF287
+endef
+TARGET_DEVICES += zte_mf287
+
+define Device/zte_mf287pro
+	$(call Device/zte_mf287_common)
+	DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+	DEVICE_MODEL := MF287Pro
+endef
+TARGET_DEVICES += zte_mf287pro
+
+define Device/zte_mf289f
+	$(call Device/zte_mf28x_common)
+	DEVICE_MODEL := MF289F
+	DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
+endef
+TARGET_DEVICES += zte_mf289f
 
 define Device/zyxel_nbg6617
 	$(call Device/FitImageLzma)
@@ -881,7 +1252,6 @@ define Device/zyxel_nbg6617
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
 	DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
-	DEFAULT := n
 endef
 TARGET_DEVICES += zyxel_nbg6617
 
@@ -895,4 +1265,5 @@ define Device/zyxel_wre6606
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 endef
-TARGET_DEVICES += zyxel_wre6606
+# Missing DSA Setup
+#TARGET_DEVICES += zyxel_wre6606