X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fimage%2Fgeneric.mk;h=deec544f658289b8bfd7d9122a8d99420b60253e;hb=539b52068a079801fe0955f7cf5f39e536a08803;hp=e17db37d8205de0499bb50ec2b04edc09116ff84;hpb=cda6f1c832f96bd24e5398e156a0e8d639c691a0;p=openwrt%2Fstaging%2Fldir.git

diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index e17db37d82..deec544f65 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -274,7 +274,7 @@ define Device/avm_fritzbox-7530
 	DEVICE_ALT0_VENDOR := AVM
 	DEVICE_ALT0_MODEL := FRITZ!Box 7520
 	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
 endef
 TARGET_DEVICES += avm_fritzbox-7530
 
@@ -720,25 +720,38 @@ define Device/linksys_mr8300
 endef
 TARGET_DEVICES += linksys_mr8300
 
-define Device/linksys_whw01-v1
+define Device/linksys_whw03v2
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := WHW03
+	DEVICE_VARIANT := V2
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 6144k
+	IMAGE_SIZE := 158720k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_whw03v2 kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
+endef
+TARGET_DEVICES += linksys_whw03v2
+
+define Device/linksys_whw01
 	$(call Device/FitzImage)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := WHW01
-	DEVICE_VARIANT := v1
 	KERNEL_SIZE := 6144k
-	IMAGE_SIZE := 28704512  # 28032k minus linksys signature (256-bytes).
+	IMAGE_SIZE := 75776K
 	SOC := qcom-ipq4018
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 	IMAGES += factory.bin
-	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
-		append-ubi | linksys-image type=WHW01 | pad-to $$$$(PAGESIZE) | \
-		check-size
+	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
 	DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += linksys_whw01-v1
+TARGET_DEVICES += linksys_whw01
 
 define Device/luma_wrtq-329acn
 	$(call Device/FitImage)
@@ -1110,6 +1123,19 @@ endef
 # Missing DSA Setup
 #TARGET_DEVICES += unielec_u4019-32m
 
+define Device/zte_mf18a
+	$(call Device/FitImage)
+	DEVICE_VENDOR := ZTE
+	DEVICE_MODEL := MF18A
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_IN_UBI := 1
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ipq-wifi-zte_mf18a
+endef
+TARGET_DEVICES += zte_mf18a
+
 define Device/zte_mf28x_common
 	$(call Device/FitzImage)
 	DEVICE_VENDOR := ZTE