X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fkirkwood%2Fpatches-5.15%2F103-iomega-ix2-200.patch;fp=target%2Flinux%2Fkirkwood%2Fpatches-5.15%2F103-iomega-ix2-200.patch;h=9313b4bc3e30b993a6403e773660f3d7d0e8c013;hb=8e6ee6cbaf3269d81410322ab464f920432eb843;hp=0000000000000000000000000000000000000000;hpb=daee22c7c0a6801a5e6de26a6039424d045788e7;p=openwrt%2Fstaging%2Fmkresin.git

diff --git a/target/linux/kirkwood/patches-5.15/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-5.15/103-iomega-ix2-200.patch
new file mode 100644
index 0000000000..9313b4bc3e
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.15/103-iomega-ix2-200.patch
@@ -0,0 +1,67 @@
+--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
++++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+@@ -8,6 +8,13 @@
+ 	model = "Iomega StorCenter ix2-200";
+ 	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_power;
++		led-failsafe = &led_health;
++		led-running = &led_power;
++		led-upgrade = &led_health;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x10000000>;
+@@ -127,16 +134,16 @@
+ 			      &pmx_led_rebuild &pmx_led_health >;
+ 		pinctrl-names = "default";
+ 
+-		power_led {
++		led_power: power_led {
+ 			label = "status:white:power_led";
+ 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+-			default-state = "keep";
++			default-state = "on";
+ 		};
+ 		rebuild_led {
+ 			label = "status:white:rebuild_led";
+ 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ 		};
+-		health_led {
++		led_health: health_led {
+ 			label = "status:red:health_led";
+ 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ 		};
+@@ -186,18 +193,18 @@
+ 	};
+ 
+ 	partition@a0000 {
+-		label = "env";
++		label = "u-boot environment";
+ 		reg = <0xa0000 0x20000>;
+ 		read-only;
+ 	};
+ 
+ 	partition@100000 {
+-		label = "uImage";
++		label = "kernel";
+ 		reg = <0x100000 0x300000>;
+ 	};
+ 
+ 	partition@400000 {
+-		label = "rootfs";
++		label = "ubi";
+ 		reg = <0x400000 0x1C00000>;
+ 	};
+ };
+@@ -211,7 +218,7 @@
+ };
+ 
+ &eth0 {
+-	status = "okay";
++	status = "disabled";
+ 	ethernet0-port@0 {
+ 		speed = <1000>;
+ 		duplex = <1>;