X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fkirkwood%2Fpatches-6.6%2F101-iconnect.patch;fp=target%2Flinux%2Fkirkwood%2Fpatches-6.6%2F101-iconnect.patch;h=935e2dfcf5486385bc821e3deaaf0ca628498631;hb=a1201f91448acb596e7de654090e3417364de6b5;hp=0000000000000000000000000000000000000000;hpb=000d25c31257e981309ea5d57c6c90337736f0bf;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/kirkwood/patches-6.6/101-iconnect.patch b/target/linux/kirkwood/patches-6.6/101-iconnect.patch
new file mode 100644
index 0000000000..935e2dfcf5
--- /dev/null
+++ b/target/linux/kirkwood/patches-6.6/101-iconnect.patch
@@ -0,0 +1,80 @@
+--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
+@@ -8,6 +8,13 @@
+ 	model = "Iomega Iconnect";
+ 	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_power_blue;
++		led-failsafe = &led_power_red;
++		led-running = &led_power_blue;
++		led-upgrade = &led_power_red;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x10000000>;
+@@ -16,8 +23,6 @@
+ 	chosen {
+ 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+ 		stdout-path = &uart0;
+-		linux,initrd-start = <0x4500040>;
+-		linux,initrd-end   = <0x4800000>;
+ 	};
+ 
+ 	ocp@f1000000 {
+@@ -89,12 +94,12 @@
+ 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ 			default-state = "on";
+ 		};
+-		power-blue {
++		led_power_blue: power-blue {
+ 			label = "power:blue";
+ 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+-			default-state = "keep";
++			default-state = "on";
+ 		};
+-		power-red {
++		led_power_red: power-red {
+ 			label = "power:red";
+ 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ 		};
+@@ -146,28 +151,23 @@
+ 	status = "okay";
+ 
+ 	partition@0 {
+-		label = "uboot";
+-		reg = <0x0000000 0xc0000>;
++		label = "u-boot";
++		reg = <0x0000000 0xe0000>;
+ 	};
+ 
+-	partition@a0000 {
+-		label = "env";
+-		reg = <0xa0000 0x20000>;
++	partition@e0000 {
++		label = "u-boot environment";
++		reg = <0xe0000 0x100000>;
+ 	};
+ 
+ 	partition@100000 {
+-		label = "zImage";
+-		reg = <0x100000 0x300000>;
+-	};
+-
+-	partition@540000 {
+-		label = "initrd";
+-		reg = <0x540000 0x300000>;
++		label = "second stage u-boot";
++		reg = <0x100000 0x200000>;
+ 	};
+ 
+-	partition@980000 {
+-		label = "boot";
+-		reg = <0x980000 0x1f400000>;
++	partition@200000 {
++		label = "ubi";
++		reg = <0x200000 0x1fe00000>;
+ 	};
+ };
+